Even though some part numbers are for specific models, you can trace its lineage back to the original. Therefore, all BMW ignition coil applications from 2003-2016 are comparable or even interchangeable.
Table of Contents
What tools do I need to replace a ignition coil?
- Ratchet set (ratchet, sockets, and extensions)
- Repair manual or access to a repair database.
- Torque wrench (optional)
- Safety glasses.
How often should you change BMW ignition coil?
Most BMW ignition coils last for more than 140,000 miles. If you frequently push your car’s performance, the lifespan of your coils can decrease significantly. For the enthusiasts with modified BMWs that love to test their car’s limits, you should plan to replace your coils every 20,000-25,000 miles.
How do you remove a stuck coil pack?
Can I change an ignition coil myself?
You can replace a failing ignition coil fairly easily at home, but remember that you’re dealing with high voltages so must disconnect your battery before you start.
Is changing ignition coil easy?
A failing coil can result in a number of problems, such a stalled vehicle, rough idling, or vehicle failure just to name a few. Replacing the ignition coil is a relatively simple and inexpensive process.
What brand of ignition coil does BMW use?
The standard brand supplied by BMW is Delphi.
How long do BMW ignition coils last?
BMW ignition coils can last upward of 140,000 miles. Replacing them is usually only done when there are signs of failure and not as preventative maintenance.
Should you replace all ignition coils at once?
In cases like this, your mechanic may recommend replacing all three rear ignition coils as a preventative measure. Whenever one of the ignition coils fails, it’s also recommended replacing all spark plugs if they haven’t been replaced in a while. New spark plugs will help ignition coils last longer.
How do I know if my BMW coil pack is bad?
- Poor Fuel Efficiency and Low Gas Mileage.
- Ignition Misfires and Stalling.
- A Struggle to Start.
- Overheating Engine.
- Engine Vibrations.
- Spark Plugs.
How much does it cost to replace BMW coils?
The Best in Auto Repair The average cost for a BMW 328i ignition coil replacement is between $128 and $195. Labor costs are estimated between $57 and $72 while parts are priced between $70 and $123. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
How do you test a BMW ignition coil?
How do you use a coil pack removal tool?
Why does my spark plug have oil?
When a spark plug well fills with oil, it means that the O-ring that seals the well to keep out oil and debris has deteriorated and started to leak. Although the leak can sometimes be fixed by tightening the valve cover bolts, more often than not the valve cover gasket and well seals will need to be replaced.
Should spark plugs have oil?
First of all, it’s not normal. You’ll never see oil on vehicle spark plugs or spark plugs in four-stroke engines, like those in lawn mowers and snow blowers. Oil only collects on spark plugs in two-stroke engines, like those in chain saws and leaf blowers. That’s due to how oil lubricates different types of engines.
How long does it take to change ignition coils?
Less than an hour, including removing belly-pan. Plug looked fine, so left untouched. Car has 100+Kmiles on it. If coil DOES need replacing, you will get a check engine light and code first, and the car will run very unevenly as if someone poured water into your gas.
Should you disconnect the battery when changing ignition coil?
But if you’re having ignition coil problems, you might be wondering if you need to disconnect the battery before changing the coil. The answer is yes, you need to disconnect the battery before changing the ignition coil. Otherwise, you could damage the coil or the car’s electrical system.
Should you put dielectric grease on ignition coils?
Dielectric grease should be applied to keep the spark from your ignition coil, which is supposed to go through the spark plugs, from arching around. It also prevents it from going through the boot to the ground.
Should I disconnect the battery when changing spark plugs?
This is a common question that people have when they are trying to change the spark plugs in their vehicle. The answer is that you do not need to disconnect the battery in order to change the spark plugs. You can simply remove the spark plug wire from the spark plug and then unscrew the spark plug from the engine.
How much does it cost to change an ignition coil?
The price for ignition coils is between $168 and $218. And the labor costs are estimated between $51 and $64. This price does not include taxes and fees, and it will depend on the make and model of the car, or unique location. Related repairs may be required, please expect to pay more.
How much do ignition coils cost?
The cost of a single ignition coil averages about $20 to $40. The labor cost depends on the car model but will usually set you back around $50 to $100.
How do you remove a BMW coil?
How much does a BMW coil cost?
Most Popular BMW Ignition Coils Based on industry averages you can expect to pay between $21.69 and $255.84 for a BMW ignition coil.
Are Bosch ignition coils good?
Bosch Coils Very good quality ignition coils. I personally like all Bosch products so swapping out the Delphi coils for Bosch coils was a reliability upgrade in my opinion! The car is running great without an.
Is NGK better than Bosch?
NGK spark plugs are more expensive than Bosch’s spark plugs, but their quality is outstanding. They offer excellent performance and perform better in colder weather conditions.