The only difference between these injectors at the end of the day is the retail price. The TSB is specific for the S63 V8 which is the highest stock output engine that uses this particular type of direct fuel injection system. Remember that the BMW N54, N63, and S63 engine in ETK use the same fuel injector.
Table of Contents
How do I identify my BMW injectors?
The index number can be found on the head of the injector after the BMW part number. An example of this is 13538616079-11 where “11” is the index number. Injectors with index 10 and lower have a different calibration and construction than injectors with an index of 11 or higher.
What are the 3 types of injectors?
Your vehicle can be equipped with one of the three most common injection systems on the market. GDI (Direct injection), SDI (Semi-direct injection) or TBI (Throttle body injection).
When did BMW switch to direct injection?
Although BMW used direct injection in airplane engines in the 1930’s they did not implement DI until the mid 2000’s. BMW’s N54 engine, introduced in the 2007 335i, was the first engine to feature direct injection and turbocharging.
Does BMW use port injection?
What CC are N54 injectors?
N54/N55 Multi-Port Injection Kit – 750cc.
What are the two types of injectors?
There are basically two types of non-hydraulic common rail injectors — electromechanical solenoid base and Piezo. Piezos are typically found on newer applications, depending on the vehicle. In this short video, we walk through how both types essentially work, how they are different and the technology inside each one.
What are the two types of fuel injectors?
The basic types of fuel injection systems are single-point fuel injection, multi-point fuel injection, sequential fuel injection, and direct injection.
Are all fuel injectors the same?
There are two distinct types of fuel injectors: high impedance units, and low impedance units. A high-impedance injector (aka saturated) uses a high resistance value of around 12 ohms across its coil, but runs at low current levels to keep the circuitry cool.
Is BMW N54 direct injection?
The N54 was produced alongside the naturally aspirated BMW N53 engine; both engines have direct injection, double-VANOS (variable valve timing), an open-deck engine block and an electric water pump.
Is BMW E90 direct injection?
Turbocharged E90 engines utilize a direct injection style injector. This style injector sprays fuel directly into the cylinder and is mounted in the center of the cylinder head between the camshafts.
Is BMW N55 direct injection?
The new N55 is the first BMW inline-6 to combine turbocharging, High Precision direct fuel injection, and Valvetronic variable intake technology. It features a single, mid-sized turbocharger with a “twin-scroll” housing to boost performance and minimize the response lag.
Is BMW N52 direct injection?
One major difference with the N52 is that it comes with High Pressure Injection, which is basically direct injection.
What is the difference between direct injection and port injection?
The difference is how they atomize the fuel: direct injection uses very high pressure and is sprayed directly into the spark plug area to ignite. Port fuel injection uses heat from the valves to atomize the fuel before being ingested into the cylinder when the valve opens,” Kociba said.
What is SFI fuel injection?
Basically, a SFI (sequential fuel injection) system has a fuel injector for each cylinder. Each of these injectors puts fuel into the system at 30-40 PSI before the intake valve.
What brand are BMW injectors?
The Bosch OE replacements are the same as the BMW injectors.
Are N53 and N54 injectors the same?
According to RealOEM, injectors for the N54 are a completely different part number from the N53, so not compatible… Yep.
How long do N54 injectors last?
The N54 fuel injectors are warrantied for 10 year or 120,000 miles. If you are under warranty, BMW will try to only replace the fuel injector that is leaking. MAKE THEM REPLACE ALL! If you have one injector leaking, it is likely more will follow soon after.
Can you rebuild N54 injectors?
For over thirty years, GB Remanufacturing has been rebuilding fuel injectors, and are now the first company to remanufacture BMW’s Index 12 injectors for the N54, and we are the only company to make these available to you.
How much HP does port injection add?
Port injection is really the final fueling upgrade to push the B58 well beyond 600-700whp on heavy E85 mixtures. Proper B58 PI setups can even support up to 1,000+whp.
Can you mix different index injectors?
IMPORTANT: Injectors with index 11 and higher have a different calibration and construction than injectors with index 10 and lower. Due to this difference, the injectors with index 11 and higher and injectors with index 10 and lower cannot be mixed on the same engine bank (e.g., cylinders 1-4 or 5-8).
What is a DI injector?
October 13, 2021. Direct injection (DI) is a fuel delivery system common in modern cars with gas and diesel engines. Rather than a fuel/air mixture entering the engine’s cylinders through the intake valves, an injector sprays fuel directly into the combustion chamber in an engine with direct injection.
What is a high pressure injector?
The high-pressure injector provides the interface between the fuel rail and the combustion chamber. It is designed to meter and atomize the fuel such that a specific air-fuel mixture with optimum combustion characteristics in the combustion chamber is achieved.
Which is the most common type of fuel injection system?
Because fuel only remains in the port for a short amount of time, sequential injectors tend to last longer and remain cleaner than other systems. Because of these advantages, sequential systems are the most common type of fuel injection in vehicles today.
How do I know what fuel injectors to buy?
Fuel Injectors are sized by their flow rate. Flow rate is a measurement of how much fuel can be delivered over time. It is listed in pounds per hour (lbs./hr.) or cubic centimeters per minute (cc/min.). The right size injector can supply enough fuel under full load conditions at an 80% duty cycle.