Depending on the make and model of your vehicle, your timing chain should last anywhere from 80,000 to 120,000 miles. Fortunately, most timing chains are covered by a manufacturer’s warranty, so if yours fails prematurely, you shouldn’t have to pay for the repairs.
Table of Contents
What year BMW has timing chain issues?
BMW Petrol Engine – Timing Chain Failure A range of BMW petrol engines in cars registered between 2001 to 2015 appear to have a design problem affecting the timing chain or tensioner. The engine timing chain is very weak – it stretches over time, and ultimately snaps.
Is timing chain covered under warranty BMW?
The engine timing chain and oil pump drive chain module limited warranty extension to 7 years/70,000 miles (as determined by the vehicle’s original in-service date) for defects in material and workmanship applies to eligible US-specification BMW vehicles that are registered, operated, and have their covered repair …
How much does BMW charge for a timing chain replacement?
Cost at the Mechanic: $1,624 to $1,879 Your BMW timing chain should be replaced every 100,000 miles to keep your car healthy. This engine component is designed to last, but it is subject to wear and tear over time and use like any other component. Parts Needed: BMW timing chain.
Is it worth replacing timing chain BMW?
Prevent further damage to your engine by having your timing chain checked and replaced. BMW use timing chains in almost every model of engine that they produce. It is recommended to replace your timing chain before failure as repair prices can become very high from internal engine damage if left.
Why do BMW timing chains fail?
Here are the causes of timing chain problems: Wrong oil: Using the wrong engine oil in your BMW can cause various problems. However, the timing chain is one of the major parts that will be affected. It will likely wear out faster if you use the wrong oil.
How do I know if my timing chain is bad on my BMW?
- Rattling Sound on Starting the Engine or Idling. A common finding in a vehicle with a bad timing chain is unusual rattling noise when the engine is started or when brakes are engaged.
- Misfiring Engine.
- Contaminated Engine Oil.
- Check Engine Light.
- Inability to Start the Engine.
When did BMW fix the N20 timing chain issue?
1. Timing Chain. The timing chain appears to be the number one fault on the N20, however, this issue is mostly prevalent on engines and vehicles produced prior to 2015. In January 2015, BMW redesigned the timing chain components, which seems to have significantly reduced the chance of failure.
How do you check the timing chain on a BMW 328i?
Is it worth fixing a timing chain?
The Bottom Line. The timing chain is an essential component of any engine, and your car would be useless without it. If your timing chain breaks while you’re driving, your vehicle’s engine is likely to suffer catastrophic damage.
How do I know if my timing chain needs to be replaced?
- The engine misfires. Once a timing chain is stretched and has lost its integrity, the chain may skip a gear and lose the necessary coordination leading to an engine misfire.
- There is a rattling sound.
- Check your car’s oil for metal shavings.
What happens if the timing chain breaks while driving?
A broken timing chain will cause an engine to not start or fail while driving. If the belt is already broken, the engine won’t have enough compression to start. If it breaks or jumps while driving, the pistons will be damaged from contact with the valves. The valves themselves will bend and potentially ruin the engine.
How much does it cost to fix a BMW timing?
Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor).
How much does it cost to fix a timing chain?
How much does timing chain replacement cost? A mechanic can replace a timing chain for between $1,600 and $1,800, or you can do it yourself for between $600 and $800. Due to how hard it is to replace this part, the price is high.
How do you prevent timing chain failure?
- Inspect your timing chain cover frequently for leaks.
- Make sure engine oil levels don’t get low.
- Don’t let the engine overheat; if it does, do not drive it.
Which BMW engines have timing chain issues?
Different issues have been seen in the BMW engines like the timing chain problem. These issues have been prevalent in some variants of the BMW 320d 2.0 Diesel, 520D 2.0 Diesel and X5 330D 3.0 Diesel.
How much does it cost to replace a timing chain on a BMW X3?
The average cost for BMW X3 Timing Chain Replacement is $1520.
How do you check a timing chain?
Read the amount of stretch on the timing tab. For example, if the rotor tip began to move at 10° after TDC as measured at the timing mark, the chain has 10° of stretch. Any reading more than 4° to 5° is considered excessive and you need to schedule time to install a new timing chain and gear set.
How long can you drive with a bad timing chain?
Driving with a bad timing chain could give you serious engine damage, and it’s also dangerous because it could cause your vehicle to stop suddenly without warning. A timing chain typically requires replacement anywhere from 40,000 to 150,000 miles.
Will a bad timing chain throw a code?
Hi there – yes, a worn or stretched timing chain, weak timing chain tensioner, or worn timing chain guides can cause misfiring, cam timing problem codes, low power and generally poor running of the engine. Most, if not all, of these problems will illuminate the Check Engine light.
At what mileage should a timing chain be replaced?
Every time you use the engine, the timing chain is in use. When does a timing chain need to be replaced? The timing chain normally needs to be replaced between 80,000 and 120,000 miles unless there is a specific problem. Issues with the chain are common in higher mileage vehicles.
How long does the N20 timing chain last?
On the BMW N20 engine, timing should be replaced every 100,000 kilometers. The automaker indicates this period, because the oil temperature is high and the plastic guides deteriorate quickly. To prevent engine damage, the BMW N20 timing chain should be replaced when mileage has not reached 100,000 kilometers.
How reliable is the BMW N20 engine?
Overall, expect the BMW N20 to be a reliable engine. It seems to be a slight improvement over the preceding N52 engine. A concerning common problem is the N20 timing chain. This mostly applies to N20’s produced prior to 2015.
How do I inspect my N20 timing chain?
Is timing chain classed as wear and tear?
A timing chain is not a wear and tear item, it is a failure if it snaps. The only way they can class this as an ongoing problem is if it had been obviously noisy on the buildup to this failure and/or you have skipped services. Chain driven engines need fresh oil at least once a year.