Can BimmerLink clear codes?


Sharing is Caring


Read and clear diagnostic trouble codes from all control units in your car.

What does F25 mean on BMW X3?

The F25 is the second generation of BMW X3. The vehicle was unveiled in 2010 at the 2010 Paris Motor Show.

How do you clear the fault code on a BMW?

YouTube video

How do you read BMW fault codes?

  1. Standalone diagnostic device. Using a standalone diagnostic device to read out the error memory is easy and fast.
  2. Laptop with software and OBD cables. You can also read a BMW’s error memory with a laptop.
  3. Your smartphone and an OBD2 adapter.

Why is my BMW X3 losing power?

A loss of power, the sudden loss of propulsion while driving, could be caused by a problem in your exhaust system. If you have bad cylinders or misfiring spark plugs, it can consume the power that your car needs to function properly.

What is the life expectancy of a BMW X3?

The BMW X3 can last on average between 150,000 to 200,000 miles with regular servicing, proper maintenance and conservative driving habits. Based on an annual mileage of 15,000 miles per year, this equates to 10 to 14 years of service before it will require major repairs or break down.

How do you reset the computer on a BMW x3?

  1. Turn the key to the ON position without starting the vehicle.
  2. Press and HOLD the ODOMETER button for TEN seconds.
  3. You will see FGSTNR with a number on the dash screen.
  4. Add the last FOUR numbers.

How long does it take for a BMW computer to reset?

You can reset a BMW ECU by unplugging the negative battery cable for 10 to 15 minutes. This should be enough to reset the ECU in most BMW models. If this doesn’t work, you can also try jumpstarting your car to reset it. This will also help if the issue is a drained battery!

How do I delete fault codes?

Press the ERASE button on the scanner to clear the trouble code. Doing this will turn off the check engine light. Depending on the type of scanner, the ERASE or CLEAR button will get rid of the trouble codes permanently. Turn off the ignition and unplug the scanner from the OBD2 diagnostic port.

How do you read BMW codes without a scanner?

YouTube video

How do you unlock the hidden menu on a BMW?

YouTube video

Can I drive with check engine light on BMW?

A steady glow typically means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is needed immediately. If your check engine light is flashing in your BMW, we highly recommend not to drive the vehicle and schedule BMW service today.

Is Bimmercode worth?

Bimmercode is excellent and well worth the money. I’ve set up the auto start/stop, removed the display warning at startup, changed the air recirculation settings, added the extra exhaust noise setting to the menu.

Which is better Bimmercode or BimmerLink?

BimmerCode is for all the features (seats, lights, windows, etc) and BimmerLink is more for diagnostics (battery registration, clearing faults, pulling trouble codes, etc.). They just just happen to overlap with the ASD feature but only BimmerLink can code out burbles and open/close valves.

Do you have to pay for BimmerLink?

There are certain (very limited) functions available for the free versions of both Bimmerlink & Bimmercode but they’re about as much use as a catflap on a submarine. The free versions are handy for checking compatibility with your car and OBD Adapter before purchasing the full versions but that’s about it.

How do I get my BMW out of limp mode?

The first step to deactivate the limp mode is to apply the brakes and make a stop at a safe spot. Let the engine rest for about five minutes without disturbing any system. This step ensures that the inbuilt computer system aids in disabling every mechanism inside the car.

What problems do BMW X3 have?

Common BMW X3 Problems Broken timing chain guide: The timing chain guide of the X3 is made of plastic, while the timing chain is metal. The plastic guides of the X3 make them prone to premature wear and failure. With a broken timing chain guide, the engine’s timing is compromised and may lead to engine failure.

Why is my BMW not accelerating properly?

Culprits include a dirty fuel filter, clogged fuel tank strainer, clogged or failing fuel injectors, or a defective fuel pump. On most vehicles replacing the fuel filter is a DIY operation.

At what mileage do BMW start having problems?

Although we believe BMW’s are reliable cars there are a few primary issues that plague a vast majority of all BMW’s and BMW engines. A lot of these problems start to develop somewhere in the ballpark of 80,000-120,000 miles.

At what mileage does a BMW break down?

Almost any BMW has the potential to run for up to 200,000 or even 250,000 miles with proper maintenanceโ€“and there are always going to be outliers that go further.

Does BMW X3 have timing belt or chain?

All X3s use timing chains rather than belts. On early examples of the 20d this includes BMW’s N47 engine which has been known to suffer timing chain problems when used in other BMWs. For peace of mind, it might be worth tracking down a facelift car with the later unit, known as the B47.

Will disconnecting battery reset fault codes?

Leaving the battery disconnected for about 15 minutes will ensure the vehicle systems will completely reset when you reconnect the battery. Secure the negative cable back to the terminal and cover it with the cap (if applicable). Disconnecting the battery will clear the error codes and reset the check engine light.

Will disconnecting battery reset ECU?

It depends on the car’s age and type of ECU used. On some older cars, disconnecting the battery will reset the system but in most new cars it does nothing, except potentially reset the clock and radio station presets.

Will disconnecting battery reset transmission?

The transmission can be easily reset by leaving your battery disconnected for some time. Like many other parts of your vehicle, the battery and the transmission work together in keeping the vehicle powered and moving.

Does disconnecting battery reset ECU BMW?

All you need to do to reset your ECU is interrupt the power flow from the car battery to the car’s ECU. The most efficient way to disrupt the ECU’s power supply is to disconnect the negative cable from the negative terminal.

Craving More Content?

Carolina's BMW