Worn spark plugs can cause unnecessary load on the coils and there is often some overlap in the labor required to replace both components. If your ignition coils failed as a result of worn-out spark plugs, it is wise to replace both components at the same time.
Table of Contents
Can I replace ignition coil myself?
You can replace a failing ignition coil fairly easily at home, but remember that you’re dealing with high voltages so must disconnect your battery before you start.
How do you remove a BMW coil?

How much does it cost to replace an ignition coil on a BMW?
The Best in Auto Repair The average cost for a BMW 328i ignition coil replacement is between $128 and $195. Labor costs are estimated between $57 and $72 while parts are priced between $70 and $123. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
How long do BMW ignition coils last?
Most BMW ignition coils last for more than 140,000 miles. If you frequently push your car’s performance, the lifespan of your coils can decrease significantly. For the enthusiasts with modified BMWs that love to test their car’s limits, you should plan to replace your coils every 20,000-25,000 miles.
How long does it take to change ignition coils?
How long will it take to replace ignition coils? If you’re an avid DIY’er, depending on the car, this job can be done in under 2 hours. While you’re replacing your ignition coils, we recommend inspecting and replacing your spark plugs at the same time.
How do you get a stuck ignition coil out of a BMW?

How do you change a ignition coil?
- Safety First. Ensure the engine is cool, apply the emergency brake, and open the hood.
- Remove the Ignition Coils. Ignition coil replacement can be challenging on some vehicle’s engines.
- Test Each Ignition Coil with a Multimeter.
- Lubricate the Coils Install Them.
- Check Your Work.
How many ignition coils does a BMW 3 Series have?
Number of pins: 3. Ignition Coil: Connector Type SAE.
Should I replace all ignition coils at once?
No. One coil pack is for two engine cylinders, and you should only change the particular pack that is faulty. There is no way one defective coil pack is going to affect the others.
What are the symptoms of a faulty ignition coil?
- Loss of Power. This is one of the first symptoms of ignition coil failure.
- Check Engine Light On.
- Poor Fuel Economy.
- Backfiring.
- Misfiring Engine.
- Hard Starts and Stalling.
- Spluttering and Coughing Sounds.
- Jerking and Vibrating.
How do you check a BMW ignition coil?

What happens if you don’t replace ignition coils?
If one single ignition coil becomes faulty, the engine may misfire, as the cylinders will become out of sync. Without a working ignition coil, the air and fuel won’t ignite in the combustion chamber for one or more cylinders. This will cause them not to fire.
How do I know if my coil is misfiring?

How do you stop ignition coils from failing?
Keeping your spark plug in optimum condition can reduce your chances of experiencing an ignition coil failure. As spark plugs wear down, the gap in each spark plug is fired is widened meaning the coil needs to provide a higher voltage in order to bridge the gap.
Which brand of ignition coil is the best?
- Best Overall. Delphi GN10328 Ignition Coil. Check Latest Price. Summary.
- Best Value. ENA 8-Pack Ignition Coil Set. Check Latest Price. Summary.
- Honorable Mention. King Auto Parts Combo Pack of Ignition Coils for Honda, Acura, Saturn. Check Latest Price.
Will a new coil pack improve performance?
In addition to being more reliable, coil packs are generally credited with providing more horsepower and torque than a common distributor. Because a coil pack generally creates a much more efficient spark, it also known to provide a slight fuel efficiency improvement over vehicles that use standard distributor caps.
Do I need to disconnect battery to change ignition coil?
Ignition coils tend to fail because of bad spark plugs or plug wires. If your vehicle’s fuel-to-oxygen mixture is either rich or lean, therefore, your ignition coils may fail prematurely. Additionally, engine heat and vibrations can cause damage to ignition coils.
Do ignition coil brands matter?
You can replace a failing ignition coil fairly easily at home, but remember that you’re dealing with high voltages so must disconnect your battery before you start.
Can you drive with faulty coil pack?
Coils from a quality manufacturer are worth the extra money. They also will be a better fit and be very close to the electrical requirements of the engine. Cheap coils try to use as few designs as possible, and electrical input/output might vary substantially.
What tool is best for removing spark plugs?
You can even drive with a faulty ignition coil if you have to, though you’ll notice the car running poorly. Left unchecked, an ignition coil problem can damage other parts of the car, especially the catalytic converter, which could lead to larger problems if not dealt with.
Where do you put the grease on a spark plug?

Why is my car still misfiring after I change the spark plugs?
The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place. You may also need a universal joint if your spark plugs are difficult to reach.
Should I reset ECU after changing Sparks?
If it’s a specific cylinder it could be the spark plug wire (if your car has them) or a bad fuel injector (if you have individual injectors for each cylinder). It could also be low compression in that cylinder.
How often do ignition coils need to be replaced?
The ignition coil on your car is supposed to last around 100,000 miles or more. There are a number of factors that can lead to this part become damaged prematurely. Most of the newer cars on the market have a hard plastic cover that is designed to protect the coil from damage.