You will not see any added power with just changing out the stock parts without tuning, hell you’ll probably lose power installing an intake without tuning for it.
Table of Contents
How much HP does a downpipe add BMW?
Upgraded Downpipe + Intake + Tune = Best Performance Benefit With zero other mods, a B58 with an upgraded downpipe will add approx. 10-15whp. This is simply from better turbo spool and more efficient turbo performance. However, the gains become amplified on cars that have other mods.
How long does it take to install a downpipe on a BMW?
Depending on your tool/lift/skills it shouldn’t take more than 3 hours TOPS. Our techs can get it done in 1.5-2hrs. Unbolting the sensors while still in the engine bay would suck! I unplugged mine from above and unscrewed them outside of the car.
Are BMW downpipes worth it?
Downpipes are definitely worth it if you also do a dyno tune – it provides a boost in horsepower and makes your car sound more aggressive. However, if tuning is not done, horsepower gains are minimal – making downpipe not worth the money.
Is installing a downpipe easy?
Not hard. Throw it up on jacks and you’ll get it done under two hours. If you decide to get it installed, should not cost more than $200. You will need a O2 sensor socket.
Why do you need a tune after downpipe?
Downpipe does not require tuning to work. If you really don’t want a tune or you can’t afford it – you can install downpipe without a tune. The main reasons why I recommend you tune after installing a downpipe are horsepower and check engine light.
What is needed to install a downpipe?
What are the tools required for the installation of downpipes? The tools required for the installation of the downpipe are the usual garage tools and no special tools are needed for this. As this is a bolt on replacement so the usual garage tools perform the job well.
How long does it take for a downpipe to cool down?
It takes an exhaust at least 20 minutes to cool down enough to touch. Of course, if it is a hot day or if your car is overheating, it will take a little longer. Parts of your exhaust can get up to 1600℉, so it is really good that you are being careful!
How much does it cost to install a downpipe N55?
From what i’ve found with searching a good shop should be able to do an N55 downpipe in 2 hrs. No more than $250.
Do downpipes increase HP?
Conclusion. Upgraded downpipes provide great increases in horsepower and torque on turbocharged vehicles by allowing exhaust gasses to flow easier as they leave the turbo. Paired with the appropriate software, a downpipe can provide significant gains and make a vehicle more fun and engaging to drive.
Does a downpipe make your car pop?
Aftermarket downpipe definitely makes a car louder and sound more aggressive. This is because aftermarket downpipes are louder than stock and they reduce the backpressure in exhaust. Allowing sound waves to travel smoothly without collision.
Does downpipe affect the engine?
A downpipe is put in place because it allows the turbo aspect of the engine to be more effective. The downpipe steers gases away from the turbine, creating more uninterrupted power. When you get out on a straightaway and open up your Mercedes, or a similar vehicle, you’ll feel the difference.
Does a downpipe change sound?
Downpipe is the biggest bottleneck in the exhaust system and it will change the sound of the car significantly (from what others have said).
Does a downpipe increase fuel consumption?
Registered. it all depends on how you drive, the potential for slightly better mpg when cruising should be there after a downpipe and software, however if you are driving hard expect worse mpg.
Does a downpipe void warranty?
Installing downpipe will not void your car’s entire warranty. If you are living in the US, then you are protected by the Magnuson Moss Warranty act. For a dealer to void your warranty, they must prove how your aftermarket install is a direct cause to the issue.
Do downpipes void BMW warranty?
Yes it can void your warranty if you get caught, they have to prove your DP broke whatever if you break something. A tune isn’t required but you’ll get a CEL and not using the DP to it’s full potential.
Do I need downpipe for Stage 2?
Yes, catless downpipe is required for stage 2 flash tune. Otherwise there is no point of going stage 2 with stock cat where its super restrictive.
Does Catless downpipe damage engine?
Aside from not making any additional power over a high flow catted downpipe, a catless downpipe is bad for the environment and can also be bad for you, your community, and your engine.
How much HP does a downpipe add without Tune?
Installing an aftermarket downpipe without tuning can gain you a ‘good enough’ horsepower – about 20 horsepower depending on the size of engine and turbo. With tuning, you can look to increase the horsepower of your car by about 40.
Does an exhaust need a tune?
That’s a very common question for car enthusiasts. And for aftermarket headers, the answer is yes, you should tune your car when installing a new exhaust header. Major performance mods like a header can significantly alter important variables like air/fuel ratio.
Do you need a tune for a downpipe Mustang ecoboost?
Off-road downpipes will require tuning in order to prevent check engine lights or poor performance. Vehicles with catted downpipes can also benefit from tuning that optimizes engine and computer performance for the catted downpipe; however, tuning is not required with most catted downpipes.
Is a downpipe the same as an exhaust?
A straight pipe is an exhaust system without a catalytic converter or muffler. It gets its name because it’s essentially a “straight shot” from the exhaust manifold to the back of the vehicle. However, a downpipe connects the exhaust port (the opening where exhaust steam escapes) to the exhaust system’s start.
Are downpipes only for turbo cars?
Technically yes, downpipes are only for turbo cars. Downpipes are a part of the exhaust that fits between the turbocharger and the catalytic converter.
What is a Catback downpipe?
Catted downpipe has a high-flow catalytic converter, and this converter will remove restriction and allow more exhaust air to pass through the exhaust system.
How long should exhaust cool before working?
Under normal circumstances, it takes a minimum of 30 minutes for an overheated engine to cool down to a temperature where it is safe to inspect it and potentially work on it.