Although valve cover gaskets don’t necessarily need sealers or cements, it’s a common practice to glue the gasket to the valve cover. There are a number of sealant choices, too. For this application, Permatex No. 1, RTVs or Permatex High Tack gasket sealant work well.
Table of Contents
How much does it cost to replace a valve cover gasket on a BMW?
The average cost for a Valve Cover Gasket Replacement is between $581 and $713 but can vary from car to car.
How long does it take to replace a valve cover gasket on a BMW?
Depending on your model, it takes 2 to 8 hours to replace BMW Valve Cover Gaskets. The cost to change the gaskets vary from BMW engine and model so it always best to have German Car Depot inspect before quoting a price.
Is it worth replacing valve cover gasket?
The short answer is, yes. If your engine is losing oil, running the car for too long without an inspection and repair can cause permanent damage. If the gasket is worn out, it will leak engine oil and the top of the engine will be likely be covered in oil.
How much does it cost to replace valve cover gasket N55?
How much does it cost to replace my BMW N55 valve cover? If you plan to take your car to the dealer to have this job done, you can expect this to run anywhere from $1500 to upward of $2000. By purchasing the parts through us and doing this job yourself, you will only pay a fraction of the cost.
Why do BMW valve cover gaskets leak?
Your valve cover gasket may leak because of cracks and wear and tear. These leaks will cause your engine oil to deplete rapidly. The symptoms can result in a burning smell coming from under the hood. Oil will run down your engine block and create major issues if not attended to immediately.
How many hours does it take to replace a valve cover gasket?
In many cases, valve cover gasket replacement can be completed in 1-2 hours, leading to only modest labor charges. However, it can take as long as 4-5 hours to complete the same job on other more complex engines. This, of course, will command a much higher labor cost.
How long does a valve cover last?
Recommended Services. The engine valve cover gasket should last for about 8 to 12 years. If the gasket is leaking, then the PCV (Positive Crankcase Ventilation) valve is plugged up causing the engine to build up too much crankcase pressure blowing out the gasket.
When replacing valve cover gasket What else should I replace?
If you were recommended a valve cover gasket because it was leaking, just make sure that the fastener seals are also replaced. If not, they are guaranteed to go next. As far as any other components go, if they are attached to the valve cover in any way, you should likely consider replacing those seals as well.
Can I replace valve cover gasket myself?
Replacing a valve cover gasket is fairly basic but the procedure varies by engine. The toughest part is usually getting to the valve cover itself. Step 1: The first step may be the last step. Before tearing everything apart, first try gently cinching down the valve cover bolts or use a torque wrench.
Is it safe to drive with a leaking valve cover gasket?
Is it safe to drive with a valve cover gasket problem? Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.
How much does it cost to change a gasket on a BMW?
The average cost for a BMW 325i head gasket replacement is between $3,235 and $3,877. Labor costs are estimated between $2,033 and $2,565 while parts are priced between $1,202 and $1,313. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
What’s the signs of a blown head gasket?
- White smoke coming from the tailpipe.
- BUBBLING IN THE RADIATOR AND COOLANT RESERVOIR.
- unexplained coolant loss with no leaks.
- Milky white coloration in the oil.
- Engine overheating.
How much does it cost to change a valve cover gasket?
What is the typical valve cover gasket replacement cost? The typical total cost of a valve gasket replacement is around $110 – $340 depending on the make and model of the vehicle. The parts cost very little – perhaps $10 to $40. The labour makes up the bulk of the cost: from $100 to $300.
Are BMW known for oil leaks?
Despite exceptional engineering and craftsmanship, BMW’s run into issues like any other car. Many BMW engines succumb to oil leaks, which come with expensive and lengthy repairs.
How do I know if my valve cover gasket is bad?
- Burning oil smell.
- Valve cover is dirty and leaking oil.
- Engine is low on oil.
- Engine is running rough and misfiring.
How do you stop a valve cover gasket from leaking?
How to fix a valve cover gasket leak. If you find evidence of a leak, the best solution is to use BlueDevil Oil Stop Leak. Adding 8oz. of BlueDevil oil stop leak to your engine oil is guaranteed to permanently seal any oil leaks in your vehicle’s engine.
Can a leaking valve cover gasket cause power loss?
Will a leaking valve cover gasket cause the loss of horsepower? Not usually, they just leak oil. If it lets oil get onto a spark plug well a misfire would be possible though. You would see a check engine light in that case.
Can a leaking valve cover gasket cause rough idle?
Engine Rough Idling or Misfire: If you have ever asked, can a leaking valve cover gasket cause rough idling? Yes. In some car models and makes, the valve cover serves as a seal that prevents oil from getting into the spark plug tubes. Most of these gaskets are designed in the form of O-rings.
Is a valve cover gasket the same as a head gasket?
Two different areas on the engine. A valve cover gasket is usually fiber or rubber and all it does is deal against oil leaking out. A head gasket seals between the head and the block, is made of metal, and is subjected to high heat and pressure. A blown head gasket and your car doesn’t run correctly, if at all.
How long do BMW gaskets last?
Head gaskets can fail at any time, but they typically last at least 100,000 miles, especially if the oil and coolant are properly maintained. In order to keep the gasket in good condition, dirty or contaminated fluids should be replaced on schedule, and the engine must run at the proper temperature.
What does a valve cover gasket leak look like?

Do valve covers make a difference?
As the name implies, a valve cover is just a cover; its function is to protect the innards from the outside elements. It has no direct impact on engine performance unless the original valve cover was damaged or cracked to begin with.
Do I need to drain oil to change valve cover gasket?
No, you do not drain the oil to change the valve cover gasket, but you may need to change the oil after because some old gasket may fall into the engine; the best option is to wait until you get ready to change the old, change the valve cover first, then replace the oil.
Do you put silicone on both sides of a gasket?
Unless a primer is required, you should apply the sealant to the prepared surface. Apply an even coat to all sides of the gasket.