Does it matter what ATF you use?

Car transmissions are delicate mechanisms. Some transmission fluids are very incompatible with different transmission types as they use different additives in the fluids. Your car transmission needs the correct fluid, as specified by your car manufacturer, to run correctly and to the fullest length of life.

What ATF to use in BMW?

The recommended ATF for either is Dexron III (D4). This is also the most common ATF you will find at auto parts stores (it’s compatible with most GM and Ford auto transmissions). BMW has transitioned to a newer Dexron VI spec, which is backwards compatible with Dexron III.

How much transmission fluid does a 2008 BMW 528i take?

BMW 528xi models with GA6HP19Z ZF 6 speed transmission. 7 Liters German RAVENOL Synthetic BMW Automatic Transmission Fluid (ATF) – Adequate quantity of fluid for filter change.

What ATF does Valvoline use?

Valvoline Dex/Merc ATF is the automatic transmission fluid that has been uniquely engineered to meet and exceed the requirements automatic transmissions in vehicles that specify Dexron-III fluids.

What happens if you use the wrong transmission fluid?

Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.

What is the difference between ATF 3 and ATF 4?

Graphs in the paper show that the friction coefficient of fresh ATF+3 and ATF+4 is essentially identical, but as the fluid ages ATF+4 retains the “as new” coefficient while ATF+3 degrades.

How do you check the transmission fluid on a 2008 BMW 528i?

Our research indicates that your vehicle does not have a transmission fluid dipstick. These types of transmissions are designed to be maintenance free. In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car.

How many quarts does a 2008 BMW 528i take?

Capacity: 7.4 quarts (with filter). W/ OCOOL. After refill check oil level.

When should I change my transmission fluid BMW 5 Series?

BMW 5 Series Transmission Fluid If you don’t routinely change your fluids at least every 30,000 miles or so, you may find that your BMW 5 Series transmission will slip.

Is Synthetic ATF better?

With their improved resistance to the heat and cold, as well as sheer and oxidation, many manufacturers have already discontinued organic-based compounds in favor of synthetics. Synthetic automatic transmission fluids also tend to last longer, making them the overall recommended choice.

What is the best ATF oil?

  1. Royal Purple High-Performance ATF – Best Overall. Check Latest Price.
  2. Valvoline ATF – Best Value. Check Latest Price.
  3. Liqui Moly Top Tec ATF – Premium Choice. Check Latest Price.
  4. ACDelco ATF. Check Latest Price.
  5. Torco MTF. Check Latest Price.
  6. Mobil 1 ATF.
  7. Redline MTF.
  8. Castrol High-Mileage ATF.

Are all ATF fluid the same?

ATFs are engineered to work with the design of specific automatic transmissions. They are not all the same. Moreover, if your vehicle is still under warranty, using a fluid thatis not approved by the vehicle manufacturer will void the transmission warranty.

Can I use Valvoline MaxLife ATF instead of ATF 4?

As long as the fluid meets Chrysler MS-9602, it can be used as ATF+4.

Is Valvoline a good transmission fluid?

Valvoline is the trusted leader in transmission and drive line fluid applications, with the most complete line up of branded solutions.

Can you use Valvoline MaxLife ATF?

Valvoline MaxLife Multi-Vehicle ATF is suitable for a broad range of automatic transmissions including Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW and Audi vehicles.

Can you mix old and new transmission fluid?

This fluid starts to lose its standard properties and should be changed to keep the transmission parts and its performance at its peak. Mixing old and news fluids wont give you the ideal viscosity and the reduces the performance of the transmission system.

Can I mix ATF fluids?

Each vehicle has specific transmission fluid requirements, so you should not mix transmission fluids. The type of transmission fluid specified by your car’s manufacturer is based on a number of factors, including the transmission itself, operating temperatures, and service life expectancy.

Can changing transmission fluid ruin transmission?

Changing your fluid cannot cause any damage by itself, if everything is fine inside the transmission. The issues start to appear when you change the fluid if your clutches are already worn or damaged from use. If you go and replace the fluid after they are already worn out. this can cause slipping.

Can you mix ATF 4 and ATF 3?

Yes, you can. The three-speeds can take Dexron II and up, any Chrysler fluid, and they can be mixed. It’s probably better to have all one fluid, but you can add ATF+4. The three speed doesn’t require ATF+4 to function properly; it’s just now the only fluid recommended for all applications.

What transmission fluid is compatible with ATF 3?

Yes, ATF Type III (H) can be used in any vehicle that can use DEXRON-II or DEXRON-III fluid. Refer to your owner’s manual for the specific transmission fluid required by your vehicle.

Is ATF +3 synthetic?

ATF Type III is a semi-synthetic product with specially selected additives to give the product the following properties: Extremely low viscosity at low temperatures.

How do I know if my BMW is low on transmission fluid?

  1. Drips or puddles underneath the car.
  2. Difficulty shifting through gears and/or slipping.
  3. Shuddering or shaking.
  4. Lurching or sudden jerks.
  5. Transmission won’t engage.
  6. Humming or clunking noises.
  7. A burning smell.

How do you know if your BMW needs transmission fluid?

Use a rag to wipe off the dipstick. Then insert it back into the vehicle. Pull it out again and check the level. If the level falls below the “Full” marking, additional transmission fluid needs to be added.

How do you check the transmission fluid on a BMW 528i?

  1. Turn the car on. Before checking the transmission fluid, the engine should be warmed up.
  2. Locate the transmission fluid dipstick.
  3. Remove the dipstick and touch the fluid.
  4. Use a rag to wipe off the dipstick.
  5. Use a funnel to bring the fluid level up to full.

What kind of oil does a 2008 BMW 528i take?

Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)

Do NOT follow this link or you will be banned from the site!