How do I add coolant to my 2008 BMW 535i?

Spread the love

What kind of coolant does a 2008 BMW 535i take?

Pentosin – Pentofrost NF (G11) Silicate European Concentrate Antifreeze / Coolant – 1.5 Liters (Part No. 8114117)

Does BMW require special coolant?

BMWs have specific coolant requirements (nitrite and phosphate free) to prevent build-up and corrosion of aluminum components, so not just any off-the-shelf antifreeze will do.

How much coolant does a 2008 BMW 535i take?

It should take about 8-10 quarts to fill the system. Put the cap securely back on the expansion tank.

What coolant does BMW 535i take?

Pentosin – Pentofrost NF (G11) Silicate European Concentrate Antifreeze / Coolant – 1.5 Liters (Part No. 8114117)

How do I check the coolant level in my BMW 5 Series?

Can I use Prestone 50/50 in my BMW?

Yes. Prestone is an OAT coolant/antifreeze but also contains anti-corrosion ingredients to protect your cooling system. It can be used in all cars effectively, offering the same levels of protection, and without any damage. We offer a guarantee that Prestone is suitable for all cars and engine materials.

What coolant is best for BMW?

Zerex G-48 Formula Full Strength Coolant The ZEREX G-48 coolant is ideal for BMW cars. Designed for both diesel and gasoline engines, the coolant has low-silicate, pH, anti-phosphate technology that protects all metals, like aluminum against corrosion.

Can I use Autozone coolant in my BMW?

1. Go buy a gallon of coolant from your BMW dealer (DO NOT use any other coolant brand).

How do you flush a BMW cooling system?

With the entire cooling system drained, it’s time to do a quick flush using distilled water. With all the drain plugs back in place, fill the system with distilled water. Turn the car on and put the heater on max. Run the engine until it reaches the normal working temperature and opens the thermostat.

How much antifreeze do I put in my BMW?

2 gallons total. 1 gal BMW coolant +1 gal distilled water. The DIY covers it.

How do you bleed a BMW cooling system?

Why does my BMW say low coolant when it’s full?

If you check your coolant reservoir and it appears to be full, but your low coolant light is on, then your vehicle’s coolant sensor may be malfunctioning. Most automotive shops can diagnose a sensor malfunction and replace the sensor.

Why does my BMW keep saying low coolant?

When the cooling system reaches a low pressure, the car might perceive this as low coolant. In this case, the sensor will likely need to be replaced. Coolant leaks can occur due to a number of reasons, including a broken radiator seal or a compromised radiator.

How long can you drive with low coolant?

If your car has a low coolant you can drive for some time. It really relies on the level of coolant. If it is low but it is above the minimum, you can drive your car for a few days. But if it is below the minimum, please do not even try to run your engine.

How do you fill coolant in a BMW 535i?

  1. Find Reservoir – Locate the coolant reservoir and clean it.
  2. Check Level – Determine the coolant level.
  3. Add Coolant – Determine coolant type and add fluid properly.
  4. Replace Cap – Secure the coolant reservoir cap.

Where do you put coolant in a BMW 535i?

How much coolant does BMW 530i take?

6-cylinder engines used in BMW E60 automatic transmission models hold about 10.6 liters of coolant. Manual transmission models hold 10 liters.

Can I drive my BMW with low coolant?

BMWs have a float lever in the coolant reservoir that will turn on a light when the level gets low..as long as the light is flashing you know that the coolant level is just slightly low, so you should be fine to drive it.

How do I know if my BMW coolant is low?

  1. BMW coolant light on.
  2. Low engine coolant level message on iDrive.
  3. Engine overheats.
  4. BMW coolant light on, then off after driving.

What color antifreeze does BMW use?

Genuine BMW green HT-12 antifreeze for optimal cooling system performance. Compatible with all BMW models.

Can I use universal coolant in BMW?

BMWs have specific coolant requirements (nitrite and phosphate free) to prevent build-up and corrosion of aluminum components, so not just any off-the-shelf antifreeze.

Can I mix Prestone with BMW coolant?

Prestone all makes long life coolant is OAT coolant, is compatible with BMW coolant, will not change the color of your coolant. It meets all ASTM specs for BMW’s.

What color is Prestone European coolant?

(Pink) Antifreeze + Coolant.

Why does BMW use blue coolant?

We recommend using BMW’s “Blue” coolant in your car because it is silicate & phosphate free, and has a much longer lifespan inside of your car’s cooling system.

Do NOT follow this link or you will be banned from the site!