- Confirm the code with an OBD-II scanner, and reset the diagnostic code.
- Replace the fuel filter or screen (most common)
- Replace damaged or kinked fuel lines.
- Replace faulty fuel pressure sensor.
- Replace the fuel pump.
Table of Contents
What can cause a P0087 code?
- Fuel Filter issues.
- A crimp or restriction in the fuel supply line.
- A bad or failing fuel pump or fuel pump control module.
- Electrical problem with the low pressure fuel pump.
- Electrical problem with the Fuel Rail Pressure Sensor.
What causes low fuel rail pressure?
Three of the most common causes of heavy equipment low fuel pressure are a faulty regulator, a fuel pump malfunction or problems with the fuel lines.
What does poo87 mean?
When your vehicle’s Engine Control M (ECM) records a code of P0087, it means the fuel pressure in the system is below specification. Symptoms of a P0087 diagnostic trouble code may include a misfire because of a lean fuel condition, and the vehicle might run rough or lack power on acceleration.
Can a bad fuel filter cause P0087 code?
A clogged fuel screen or filter can cause the code P0087 to be stored in your vehicle’s computer. This code is set when the engine’s control module (ECM) detects that the fuel pressure is too low or a restriction in the fuel flow.
How do I know if my low pressure fuel pump is bad?
- Fuel Tank Noise. A damaged fuel pump might make a loud, whining sound that you’ll hear from your gas tank.
- Difficult Starts.
- Sputtering Engine.
- The Actual Stall.
- Power Loss.
- Surging Power.
- Lower Fuel Efficiency.
- Dead Engine.
Where is the fuel low pressure sensor located?
The fuel tank pressure sensor is part of the fuel pump assembly and is mounted on top of the tank or inside the tank. It’s part of the evaporative emissions system (commonly referred to as “EVAP”) and reads pressure in the fuel system to detect evaporative leaks, such as a loose or faulty gas cap.
Can a clogged fuel filter cause low fuel pressure?
A clogged fuel filter causes low fuel pressure that results in a lean fuel condition and engine misfire. This can result in poor fuel mileage, rough idling and possibly cause the check engine light to come on. Once that light is on, it’s time for a trip to the repair shop.
How do I know if my fuel rail is clogged?
- Misfiring Engine. If you notice that your engine is sputtering, especially when you accelerate, it’s possible that your fuel injectors are partially clogged.
- Rough Idling.
- Poor Fuel Economy.
- Sporadic RPM Needle.
- Dead Engine.
Can you test a fuel rail pressure sensor?
Can you drive with low fuel pressure?
Although you can still drive your vehicle with low fuel pressure, it is not recommended. Continuing to drive your car will place extra stress on your vehicle’s engine. You will eventually cause your car to stall, be unable to start, or even have the engine seize.
How do you fix a low fuel light?
Topping off your fuel tank at the nearest gas station should turn off your low fuel warning light. If your light stays on even when your fuel tank is full, your fuel level sensor could need servicing. Try using a higher grade fuel.
Will a bad fuel pump trigger a check engine light?
A weak fuel pump may throw off your car’s air/fuel ratio, causing the engine control module (ECM) to turn on the check engine light. In some cases, pump electrical issues may trigger the light as well.
What codes can a bad fuel pump cause?
- Engine service indicator. Common error codes for fuel pump problems.
- Error code P0230. Simply put, error code P0230 is caused by a low voltage in the fuel pump relay main power circuit.
- P0148 Fuel supply error.
- P0627 Fuel Pump Control Circuit “A” / Open.
How much does it cost to fix low fuel pressure?
The average cost for fuel pressure regulator replacement is between $259 and $309. Labor costs are estimated between $99 and $125 while parts are priced between $160 and $184. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
How much does it cost to replace a low pressure fuel pump?
The average cost for a fuel pump replacement is between $220 and $1,062, depending on vehicle and age. Labor costs are estimated between $124 and $260, while parts are priced between $95 and $854. Estimates do not include taxes and fees.
How long does a low pressure fuel pump last?
Your vehicle’s fuel pump should last at least 100,000 miles or more.
How much does it cost to replace fuel pressure sensor?
On average, expect to pay between $200 and $340 total for a fuel rail pressure sensor replacement. What is this? Parts alone will set you back about $60 to $100 and the labor cost to replace the sensor will cost between $140 and $240.
Can a car run without a fuel pressure sensor?
A car with a fuel injection system may run without the sensor if it is being driven for a short period of time. However, if it runs without a sensor for more than a week, then it can show symptoms that include: The engine will have trouble starting up. The engine may misfire and hesitate when you step on the gas pedal.
How do you test a fuel pressure sensor?
What are the signs that a fuel injector is clogged?
- Bumpy Idling. Rough idling is a sign that your automobile’s engine is not getting enough gasoline, and one reason why it might not be getting enough gas is that your fuel injectors are clogged.
- Dancing RPM Needle.
- Dead Engine.
- Low Gas Mileage.
- Misfiring Engine.
Will a bad fuel filter throw a code?
check engine light comes on: while the fuel filter is not directly connected to the engine computer, a blocked fuel filter can trigger a variety of trouble codes, including: low fuel pressure. lean running condition. oxygen sensor fault.
What are the symptoms of a stuck fuel pressure regulator?
- Engine Performance Problems. A faulty fuel pressure regulator can cause a loss of fuel pressure.
- Illuminated Check Engine Light.
- Black Smoke From the Tailpipe.
- Fuel In the Regulator’s Vacuum Line.
- Vehicle Cranks But Doesn’t Start.
What does a clogged injector sound like?
Typically, a car delivers a subtle rumble when at idle. If you notice that the sound has gone from low to a rough and unpleasant noise, it may be a sign of bad fuel injectors.
What happens if you put too much fuel injector cleaner?
What Happens If You Put Too Much Fuel Injector Cleaner? It is possible to give a car too much of a good thing and add too much fuel injector cleaner. If this happens, you can risk damaging the lining of the fuel tank. Also, you may notice that there is lowered engine performance and fuel efficiency.