How do I program my BMW X5 key fob?


Sharing is Caring


On your BMW key fob, hold the unlock button and press the BMW logo 3 times, then release the unlock button. If you have additional key fobs you’d like to program at this time, repeat step 3 within 30 seconds from the original key programming. Turn on the ignition to complete the process.

What battery does a 2017 BMW key fob take?

Your BMW key battery is a size CR2032. Remove the key fob cover, carefully remove the old BMW key fob battery, and place the new one in gently.

What kind of battery does BMW key fob take?

For drivers with BMW Comfort Access, BMW key fob battery replacement will require a CR2032 battery. Here’s how to replace the battery from your BMW key fob: Press in the small tab on the side of your key fob, and remove the metal valet key.

How do you change the battery in a 2017 BMW key?

YouTube video

Do BMW key fob need reprogram after changing the battery?

Typically, you do not need to reprogram the key fob after changing the battery. However, if you’ve replaced not just the batteries but also some of the internal wiring and electronics, you may need to reprogram it by pairing it with your vehicle once again.

Can I replace my BMW key battery myself?

Comfort Access BMW Key Battery Replacement After the valet key is removed, you will notice a small access port on the key fob. Use the valet key or a flat screwdriver to remove the key battery cover. Once removed, you will see the battery. Remove the dead battery and replace it with a new one.

What happens when BMW key battery dies?

Will a BMW start with a dead key fob? If your BMW key fob’s battery has run out, you won’t be able to unlock your vehicle remotely or, if your BMW has Comfort Access, use keyless entry. However, you can still access and start your car manually.

How do you start a BMW X5 with a dead key fob?

YouTube video

How do I reprogram my BMW key fob after changing the battery?

Use the key to turn the car’s ignition to position 1 and back 5 times quickly. Take the key out of the ignition. Hold the unlock button and press the BMW logo 3 times, then release the unlock button. If you have additional keys you want to program, repeat step 3 within 30 seconds from the original key programming.

How much does it cost to replace BMW key fob battery?

If you have a smart key or comfort access BMW key fob, you’ll need to replace the battery by following these quick steps: Purchase a CR2032 battery from an auto shop or department store. You can expect to pay about $2 for it.

How do I change the battery in my BMW X5 remote?

YouTube video

How do I start my BMW X5 without a key?

YouTube video

How long does BMW key battery last?

BMW key fob batteries need replacement every 3-5 years depending on usage.

Why won’t my key fob work after I changed the battery?

For your remote key fob to work properly, it has to be connected to a receiver in the vehicle. When the battery in the fob is replaced, it can sometimes interfere with the paired connection between key and car, in which case you’ll need to reset it.

Do you have to reset anything after changing battery?

To reset your car, just follow these easy steps: Detach the battery cable for two to three minutes. Reconnect the battery and start the car. Drive the car for at least 10 miles to let the engine control units find any potential problems.

Why is my car key not working after battery change?

There is a high chance that a car remote has been reset during the battery change. The key fob can also reset when you press certain buttons. So, more than one key fob not working is a good signal that the car key remote has been reset.

How do I resync my BMW key fob?

Press the BMW logo on your BMW key fob 3 times while holding down the unlock button. Let go of the unlock button after the third time you’ve pressed the BMW logo. Then, turn on the ignition, and your new key should be paired with your BMW!

How do you recharge a BMW key fob?

YouTube video

How do you program a push start key fob?

  1. With the fob in your hand, get into the driver’s seat, closing the door behind you.
  2. When you’re ready, press your car’s start button 15 times in quick succession, with no more than two seconds between each attempt.
  3. After the 15th button press, push the lock button on your fob.

Can a dead key fob stop your car from starting?

Once you’re inside, getting the car started is actually pretty easy. Automakers know that your keyless ignition may need to work if the fob dies, and the system has been designed to work even with a non-functioning remote.

What happens if my key fob battery dies while driving?

If your key fob dies while driving, nothing will happen. The car will continue to operate simply because the key fob is an unlocking and starting device only. Once the car is in motion, the ability of the key fob to affect the ignition or engine is zero.

Can I start my car without the fob?

Simply put, if you lose the keyfob that enables your push-button start before you try to drive in your car, then you simply won’t be able to start your vehicle.

Do BMW keys recharge themselves?

Driving Your Car to Charge the Key. Keep your BMW key battery charged with regular driving. Each time your key is inserted into the ignition and turned to position 1 or position 2, the battery will automatically charge.

Can you start a BMW X5 with a key?

There are two ways to start up your X5 using the remote start system: with the key fob or the BMW Connected App. Using the key fobs: Using the BMW vehicle key: If your key fob does not have a light-up display, quickly press the lock button three times within one second to start your engine.

Can I program a BMW key myself?

Take the BMW key fob you wish to program and hold down the unlock button while pressing the BMW logo 3 times before releasing the unlock button. Once again the doors should lock and unlock. When this happens, you are all set! You have programmed your BMW key fob.

Craving More Content?

  • Should I get xDrive?

    It’s worth choosing an xDrive BMW if you regularly drive on snow. Its four-wheel drive system essentially doubles the amount of grip the car has allowing…

  • Does BMW have a good resale value?

    Value Over Time: BMW 2 Series The BMW 2 Series holds its value even better, with the most accurate BMW resale value estimates expecting it to…

  • What is a standard scope service?

    The standard scope is just scanning the car with the GT1. There are many different aftermarket BMW scan tools available on the internet to choose from…

Carolina's BMW