Use the key to turn the car’s ignition to position 1 and back 5 times quickly. Take the key out of the ignition. Hold the unlock button and press the BMW logo 3 times, then release the unlock button. If you have additional keys you want to program, repeat step 3 within 30 seconds from the original key programming.
Table of Contents
How do you program a key fob for a 2006 BMW 330i?
- Working from within the vehicle and with the doors shut.
- Turn ignition to position 1 and back to off within 5 seconds.
- Remove the key from ignition and press and hold the unlock button for 15 seconds during this time press the key lock button 3 times within 5 seconds.
- Release both buttons.
Can I program a BMW key myself?
Take the BMW key fob you wish to program and hold down the unlock button while pressing the BMW logo 3 times before releasing the unlock button. Once again the doors should lock and unlock. When this happens, you are all set! You have programmed your BMW key fob.
Can BMW keys BMW key be reprogrammed?
Programming a New BMW Key Fob from Scratch Remove the BMW key fob from the ignition. Holding down the unlock button, press the lock button (BMW logo) three times, then release the unlock button. If you have than one key fob to program, repeat step 3 within 30 seconds of the original key programming.
Can you program a used BMW key?
You cannot reprogram an used key from another car.
How much is it to program a BMW key?
Actually, it won’t cost you anything to program your new key since you can program your BMW key fob yourself! Here’s how: Put your new key in the ignition and move it quickly to and from the first position five times. Remove the key from the ignition.
How do I program my e90 key?
New BMW Key Fob Programming Steps Then, take your key out of the ignition. Press the BMW logo on your BMW key fob 3 times while holding down the unlock button. Let go of the unlock button after the third time you’ve pressed the BMW logo. Then, turn on the ignition, and your new key should be paired with your BMW!
Does a BMW key need to be programmed?
Your key will come pre-programmed for your vehicle, but will still need to be activated before use.
How do you program a car key with only one key?
- Insert the key into the ignition, and turn it to the on position.
- Leave the key in this position for 10 minutes and 30 seconds, and then turn it off.
- Turn the key back on, and wait for additional 10 minutes and 30 seconds before turning it off again.
- Repeat the process for a third time.
Can you program car keys yourself?
You can’t, for example, take a remote for your old car and program it to your new car even if they are the same make and model. With newer cars, most likely you will not be able to program a new key yourself. You will have to visit a dealer or locksmith.
Can I program a used key fob?
You could reprogram a key fob to a different vehicle as long as the key is the same for the vehicle. In this case, if the key can go into the doors and unlock them, then you would need to do the following: Remove the battery from the key fob and put it back in (unless you put in a new battery)
Can I duplicate BMW key?

How do I reset my BMW Immobiliser key?
To reset the BMW e46 immobilizer, keep down the panic button on the FOB key for five seconds to reset the immobilizer. Then, push the lock button again, then sit ten feet away from the car for ten minutes.
How do you reprogram a BMW?

Can you program a BMW key to another BMW?
Press and hold the unlock button while simultaneously pressing the lock button (the BMW logo) three times, then release the unlock button. If you wish to program more than one BMW key fob while you’re at it, you’ll need to repeat step three with the additional key(s) within 30 seconds of programming the first key.
How do you know if your key needs to be reprogrammed?
A car’s on-board computers is accessible when it recognises the microchip inside transponder car keys, and without this the car will not open or start, which is the case sometimes when the keys unique code cannot be read. When this happens car key reprogramming is required.
Can a locksmith make a key for a BMW?
You can work with a local locksmith company that is qualified to reproduce and program BMW keys and fobs. You can order a “blank” replacement key and fob online, which you will take to a dealership or local locksmith for programming and cutting after it arrives.
How do I reprogram my key fob?

What do I do if I lost my BMW key?
You can order a replacement key from one of our approved BMW Centres. If you still have one remaining key, you will need to take your car and 1 form of personal ID and 1 form of Address ID along with your vehicle’s V5C logbook to your preferred BMW Centre*.
Does AutoZone reprogram key fobs?
AutoZone provides a variety of key fobs that work for most vehicle makes, and they will help you match and program your fob to your car. Key fobs can range from $20 to $400 depending on the vehicle and the type of fob you buy.
How long does it take to program a key fob?
Most dealers we contacted said key-fob programming typically takes just 15-30 minutes, and the whole process, including cutting the mechanical spare key, rarely takes longer than an hour.
How do you program a 2006 BMW key fob?
Using the working key, hold down the unlock button, press the Round (lock button) 3 times, and release the unlock button. Doors should lock and unlock. With the new key, hold down the unlock button and press the Round (lock button) 3 times and let go of the unlock button. Doors should lock and unlock and you’re done!!
How do you start a BMW without a key fob?

How do I reprogram my BMW key fob after changing the battery?

Why does my car keep saying key not detected?
Reasons your car won’t detect the key fob the battery inside the remote is dead. the remote itself is broken or no longer programmed to your car. the car battery is low. the keyless operation system is faulty.