In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car. Your car must be level when the fluid is checked and we therefore recommend having a mechanic with a hydraulic lift or underground bay check your transmission fluid.
Table of Contents
How much transmission fluid does a 2008 BMW 528i take?
BMW 528xi models with GA6HP19Z ZF 6 speed transmission. 7 Liters German RAVENOL Synthetic BMW Automatic Transmission Fluid (ATF) – Adequate quantity of fluid for filter change.
What kind of ATF does BMW use?
ATF Dexron III is the fluid standard for 4-speed BMW automatics (ZF 4HP). This is also the most common ATF you will find at auto parts stores (it’s compatible with most GM and Ford auto transmissions). BMW 4 and 5-speed automatics are made by either ZF (4HP) or GM (5L40-E/A5S360R).
How many quarts of transmission fluid does a BMW take?
Any decent brand of Dexron VI will work and you will need about 7 quarts of it. You will also need to get a transmission filter and a transmission pan gasket. 1.
How do you check the transmission fluid on a 2008 BMW 528i?
Our research indicates that your vehicle does not have a transmission fluid dipstick. These types of transmissions are designed to be maintenance free. In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car.
How do you check the transmission fluid on a BMW 528i?
- Turn the car on. Before checking the transmission fluid, the engine should be warmed up.
- Locate the transmission fluid dipstick.
- Remove the dipstick and touch the fluid.
- Use a rag to wipe off the dipstick.
- Use a funnel to bring the fluid level up to full.
How do I know if my BMW is low on transmission fluid?
- Drips or puddles underneath the car.
- Difficulty shifting through gears and/or slipping.
- Shuddering or shaking.
- Lurching or sudden jerks.
- Transmission won’t engage.
- Humming or clunking noises.
- A burning smell.
How many quarts of transmission fluid does a BMW 750li take?
Automatic Transmission Fluid Capacity: 4.2 quarts Initial Fill.
How do I know if my BMW needs transmission fluid?
- Rough Idling and Odors.
- Slipping Transmission.
- Leaking Fluid.
- Poor Shifting and Accelerating.
- Check Engine Light is On.
- What Should You Do About These Signs?
Does BMW recommend transmission fluid change?
BMW transmission fluid changes are highly extraordinary to keep your vehicle’s transmission amiable and lubricated. If you don’t routinely change your fluids at least every 30,000 miles or so, you may find that your BMW transmission will slip.
What type of transmission fluid does a BMW e90 take?
Genuine BMW 75W-90 Transmission Fluid – 1 liter.
Is BMW transmission fluid lifetime?
Depending on how you drive your BMW, this should be every 30,000 to 60,000 miles under most circumstances. You should have the ‘lifelong’ fluid inspected at least every 50,000 miles, depending on your driving habits and commute, to see if it is dirty or contaminated in any way.
How much transmission fluid does a 2008 BMW 328i take?
7 Liters of German RAVENOL Synthetic BMW Automatic Transmission Fluid (ATF) – Adequate quantity of fluid for filter change.
How do you top up BMW transmission fluid?
The only correct way to do this is to have the car running, the transmission fluid around 100degrees F and make sure the car is level. You can then open the fill hole and use a transfer pump to pump fluid into the transmission until it starts seeping back out of the fill hole.
How do you fill a BMW transmission fluid?
- Turn the engine on for a few minutes before you check the level.
- Locate the transmission fluid dipstick.
- Remove the dipstick and touch the fluid.
- Use a rag to wipe off the dipstick.
- Use a funnel to properly fill the vehicle, taking care to avoid overfilling it.
How many quarts of oil does a 2008 BMW 528i take?
Capacity: 7.4 quarts (with filter). W/ OCOOL. After refill check oil level.
Where do you add transmission fluid?
How much transmission fluid does a 2008 BMW 535i take?
7 Liters German RAVENOL Synthetic BMW Automatic Transmission Fluid (ATF) – Adequate quantity of fluid for filter change.
How do you check transmission fluid on a sealed transmission?
Where is the transmission dipstick?
Locate automatic transmission fluid dipstick, typically near where the transmission or transaxle meets rear of the engine. It looks similar to the oil dipstick.
How do you check the transmission fluid on a 2010 BMW 528i?
In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car. Your car must be level when the fluid is checked and we therefore recommend having a mechanic with a hydraulic lift or underground bay check your transmission fluid.
What are the symptoms of low transmission fluid?
- Noises.
- Burning Smell.
- Transmission Leaks.
- Slipping Gears.
- Slow Gear Engagement.
- Vehicle Accelerates Poorly.
- Check Engine or Transmission Warning Light Is On.
What will happen if transmission fluid is low?
When your transmission fluid is low, your car won’t generate as much hydraulic pressure, leading to what’s known as gear slippage. Gear slippage commonly manifests as a failure to accelerate properly. When your transmission fluid is low, you may notice your vehicle reaching high RPMs while moving sluggishly.
What are the symptoms of bad transmission fluid?
- Dirty transmission fluid.
- Transmission whining noise.
- Gears slipping.
- Can’t go into reverse gear.
- Slipping out of gear.
- Engine running hot.
- Grinding noise.
How do you check the transmission fluid on a BMW 750li?
In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car. Your car must be level when the fluid is checked and we therefore recommend having a mechanic with a hydraulic lift or underground bay check your transmission fluid.