How do you program a BMW TPMS sensor?


Sharing is Caring


  1. Adjust tire pressures to placard value.
  2. Hold TPMS tool to tire sidewall, activate Left Front, Right Front, Right Rear and Left Rear sensors.
  3. Apply OBD module to tool.
  4. Turn ignition ON.
  5. Apply OBD module to DLC.
  6. Press OK to transfer ID’s to ECU.
  7. Disconnect ONBD module from DLC.
  8. Turn ignition OFF, then start engine.

Do BMW TPMS need to be programmed?

Programmable or Configurable (Aftermarket) Programmable or configurable sensors are aftermarket universal TPMS sensors. The sensor must be programmed or cloned from an OEM or another aftermarket sensor before use, using a TPMS tool.

What type of TPMS does BMW use?

BMW TPMS types and Fitment The manufacturers of the BMW TPMS are Beru, VDO and PAL. The BMW Model range utilising TPMS technology includes the following brands: 1 Series, 2 Series, 3 Series, 4 Series, 5 Series, 6 Series, 7 Series, 8 Series – TPMS Sensors. Alpina, i3, i5, i8 – TPMS Sensors.

How much does it cost to replace a tire pressure sensor on a BMW?

On average, the cost for a BMW 328i Tire Pressure Sensor Replacement is $210 with $115 for parts and $95 for labor.

How do you reset the TPMS light on a 2007 BMW?

YouTube video

Can I install TPMS sensors yourself?

Installing cap-based tire pressure sensors is straightforward. Even if you have no experience working on your car, you won’t have trouble. In most cases, all you do is screw on the sensors in place of the valve stem caps. Avoid cross-threading the sensors because you need a tight seal for the system to work correctly.

Can you program TPMS sensors yourself?

Yes, you can! All you need are the specialized tools and loads of relevant information on how to go about programming your vehicle’s TPMS.

Can I replace just one TPMS sensor?

If one of your TPMS sensors fails and needs replacement, you can replace it individually. However, if the failure was caused by a dead sensor battery, it’s likely that the other sensors are close to failing as well.

Do I need to replace TPMS When replacing tires?

Do I need to replace TPMS when replacing tires? You don’t need to replace your TPMS sensors when buying new tires, but it’s often convenient to do so if the sensors are more than a few years old. Most TPMS sensor batteries last five to ten years, so older sensors may not last as long as your new tires.

What happens if you don’t replace TPMS sensors?

For any motorists that swap their tires out for changing seasons, it’s crucial that the TPMS sensors are reactivated and recalibrated each time. If this is not done, the vehicle’s TPMS will not perform properly and may cause the TPMS light to turn on.

How do I know if my TPMS sensor is bad on my BMW?

The sign that should cause you to worry about your TPMS sensors is when the light blinks rapidly and does not stay solid or go away. This indicates that one or more sensors are bad, or that the system itself is malfunctioning in some way.

Does Costco replace TPMS sensors?

The Costco Advantage These Lifetime services include inflation pressure checks, tire balancing, tire rotations, as well as flat repairs. Upon the service of your tires we also install new rubber valve stems (Note: TPMS valve stems and accessories will be an additional charge).

Why is my TPMS light on but tires are fine?

Malfunctioning TPMS Sensor These sensors also run on onboard batteries, which have a limited lifespan of about 5 to 7 years (up to 10 years in the best cases). Low battery power and age-related wear and tear can cause the TPMS sensor to malfunction and cause the low tire pressure light but tires are fine issue.

Where is my TPMS reset button?

The TPMS reset button is usually located beneath the steering wheel. If you are unable to find it, refer to your vehicle’s owner’s manual. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to include the spare tire, as it may have a sensor as well.

How long does it take to reset TPM BMW?

However, if you see your TPMS light on even after you’ve inflated your tires, it may just need a reset. Here’s how to reset the tire pressure light: Drive at least 50 mph for about 10 minutes to reset the sensor. Turn the vehicle off, and then turn the key to the “on” position without actually starting the car.

Is it worth it to replace TPMS sensors?

A: Tire pressure monitoring sensor batteries are designed to last 10 years. It sounds as though yours may have died. The law does not demand that you replace the sensors, but for your peace of mind, convenience and safety’s sake, it makes sense to replace them.

Are aftermarket TPMS sensors any good?

An aftermarket tire pressure monitoring system can actually be better than some basic factory systems, which only activate a warning light when tire pressure drops. All five of these top-rated TPMS give a driver real-time pressure readings.

How much does it cost to install TPMS sensors?

The average cost for TPMS sensor replacement is between $208 and $250. Labor costs are estimated between $55 and $69 while parts are priced between $153 and $181. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

Does Autozone relearn TPMS?

PRODUCT DESCRIPTION The MaxiTPMS TS408 is an easy-to-use handheld TPMS service tool that can activate and read sensor IDs, battery life and tire pressure and temperature. The TS408 can also program MX-Sensors to replace OE sensors and can display on-screen relearn procedures for all TPMS-equipped vehicles.

Can you relearn TPMS without tool?

With the exception of some Chrysler and Mazda models that may be relearned to the vehicle via a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure.

How do you remove a TPMS sensor without removing the tire?

short of that, there is no way to remove a TPMS sensor without either destroying or removing the tires. They all mount to the rim from the inside of the tire, and they are too large to be pulled thru the valve stem hole.

How long do BMW TPMS sensors last?

The lithium ion batteries inside TPMS sensors may last anywhere from five to 10 years. Five to six years is a more typical lifespan for older TPMS sensors. TPMS sensors don’t broadcast a continuous signal but only broadcast when the vehicle is in motion. Even then, the signal is intermittent to conserve battery life.

How often do TPMS sensors need to be replaced?

TPMS sensors are designed to last for many years โ€“ 5-10 years is a likely lifespan. Given their cost, most drivers will be inclined to replace TPMS sensors on an “as needed” basis โ€“ in other words, only once their batteries have expired, or other TPMS components have failed.

How long does it take to replace TPMS sensor?

It takes less than one hour to change all four TPMS modules if you take your car to a credible tire shop.

Will Over inflated tires cause TPMS light to come on?

TPMS is an electronic system inside the tire that monitors the air pressure in your tires. If your tires are under- or over-inflated, the TPMS activates a warning light on your dashboard. When the light is steady, it means you need to have your tire pressure checked.

Craving More Content?

Carolina's BMW