How do you reset the tire pressure light on a 2008 BMW 328i?


Sharing is Caring


YouTube video

What is the correct tire pressure for BMW 328i?

The recommended tire pressure for most BMW models is 32 PSI (pounds per square inch), but you should always check the specifics for your vehicle. You can check the sticker on the inside edge of the driver side door, or consult your owners manual.

How do you check tire pressure on a 2008 BMW 328i?

YouTube video

Why does my BMW say tire pressure is low?

What does it mean: The BMW tire pressure monitoring system (TPMS) is designed to alert you when tire pressure is too low in your vehicle. The warning light illuminates when air pressure is 25% below the normal recommended pressure for your BMW model.

What is the correct PSI for my tires?

On newer cars, the recommended tire pressure is most commonly listed on a sticker inside the driver’s door. If there’s no sticker on the door, you can usually find the specs in the owner’s manual. Most passenger cars will recommend 32 psi to 35 psi in the tires when they’re cold.

What tire pressure is too low?

If you have standard passenger tires (ninety percent of vehicles do) the lowest tire pressure you can generally drive with is 20 pounds per square inch (PSI). Anything under 20 PSI is considered a flat tire, and puts you at risk for a potentially devastating blowout.

Can you fill BMW tires with air?

Typically, you should put 32 pounds per square inch (PSI) of air in your BMW tires. If you’d like to make sure that this measurement is true for your BMW, however, you can check the sticker on the inside of the driver’s door. To check the pressure on your tires, you’ll need a tire pressure gauge.

Does BMW show tire pressure?

YouTube video

How do you check tire pressure on a 2008 BMW?

YouTube video

How do you turn off the low tire pressure light on a BMW?

From the home menu click car, vehicle status, tire pressure monitor, and tire settings. With the car stopped, and the engine running select perform reset. You will need to go on a short drive for the reset to be completed.

How often does tire pressure go low?

A good rule of thumb to remember is that your tires lose about one PSI every month after you fill them, so checking every month can help you to ensure that they are always inflated to the proper pressure.

How do you reset the low tire pressure light on a BMW 3 Series?

YouTube video

Is 40 PSI too high for tires?

Specifically, the level of 40 psi can be suitable for passenger cars or sports cars. But this is too high for small cars with a recommendation below 35 psi, while 40 psi is too low for large trucks. The recommended level for the tires of famous sports cars and passenger cars is between 32 -40 psi.

Is 36 PSI too high for tires?

“Recommended cold tire pressure is in vehicle manual and on tire label. It’s usually 30 psi for small, 36 psi for medium, and 42 psi for large car.”

Is 38 PSI too high?

For instance, if 35 psi is recommended, and the maximum safe pressure listed on your sidewall is 44 psi, you can safely put 38 or 40 psi in your tires. You can even go to 44 psi. You’ll experience a harder ride, but you won’t create a blowout danger.

Is 35 psi good for tires?

Most passenger cars’ psi requirement will be between 30 to 35 psi, but several vehicles fall outside of that range and every vehicle will have specific requirements. Good tire air pressure ensures that tires wear evenly, provide a smooth ride, and increase fuel efficiency.

Is it OK to drive with low tire pressure?

Is it Safe to Drive? If your tire pressure is only slightly low, you should be able to drive safely for a few more miles until you can add air. Tire pressure that is extremely low can lead to tire failure. This can result in a blowout, which can be extremely dangerous.

What happens if I put too much air in my tires?

  1. Go to the tire that is overinflated and locate your valve stem.
  2. Check your pressure with a tire air pressure gauge and take note.
  3. Using the back end of the air gauge push the metal pin in the center of the valve stem down to release some of the air in the tire.

How much does it cost to put nitrogen in tires?

On new car tires, the cost can range from $70 to as much as $179. On existing tires, you’ll pay up to $30 per tire for service to drain air and refill with N2. Refills will run you $5 to $7 per tire, which you can expect to do less often than with air-filled tires.

Do run-flat tires need air?

First, let’s dispel the myth that run-flat tires never need air pressure. They do. The tires on your car or truck do not support the weight of your vehicle. The air pressure does that job.

Does BMW put nitrogen in tires?

BMW uses nitrogen in their tires because the chemical offers better fuel economy, improved performance, and more mileage on the tires before they need to be replaced. Nitrogen offers the advantage of stabilizing tire pressure longer than air because it is less likely to migrate through the rubber of the tires.

Where is the TPMS reset button?

The TPMS reset button is usually located beneath the steering wheel. If you are unable to find it, refer to your vehicle’s owner’s manual. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to include the spare tire, as it may have a sensor as well.

How long does it take to reset TPM BMW 328i?

Start the car and let it run for 20 minutes, which allows the sensors to reset. You’ll find the tire pressure monitor reset button located beneath the steering wheel.

Why does my tire light stay on?

When the TPMS light comes on โ€“ and stays on โ€“ at least one of your tires is at a low pressure level. Check the pressure of all of the tires with a gauge and determine the cause of pressure loss and add air or service the tire(s) as appropriate.

How much PSI does a BMW have?

The recommended tire pressure for most BMW tires is 32 PSI (pounds per square inch), but you should always make sure by checking the sticker on the inside edge of the driver’s door.

Craving More Content?

Carolina's BMW