The eccentric shaft position sensor is used as a feedback for the Valvetronic eccentric camshaft. The eccentric shaft is actuated by the Valvetronic motor and in return controls variable intake valve lift. The eccentric shaft sensor is mounted to the cylinder head beneath the valve cover.
Table of Contents
How much does it cost to fix a Valvetronic motor?
Repair cost is around $3,400.
How do you relearn a BMW Valvetronic motor?
Insert the valvetronic motor and connect its 2 pin plug. Then switch the ignition onto position 2 and within a space of 15 seconds, depress the accelerator pedal down to full throttle 10 times and you will hear the valvetronic motor program itself back to factory spec.
What causes a Valvetronic motor to fail?
Poor servicing or after market oil filters are often the route cause of valvetronic failure. As you can see from the picture above, the after market oil filter on the right hand side has started to collapse.
Can Valvetronic cause misfire?
For a warm engine, the threshold for misfires is by Lambda around 1.4 .. 1.5. So – unless the wear of the Valvetronic is not so significant, that the air fulfillment of the cylinder is for 50 .. 60% less than optimal – Valvetronic IS NOT the cause of misfire!
How do I know if my valvetronic motor is bad?
- Illuminated MIL lamp that may or may not be flashing.
- Varying degrees of power loss.
- Rough idling/running at some engine speeds.
- Excessive fuel consumption.
- A hard-start or a no-start condition may be present.
Can you drive without valvetronic?
You shouldve just unplugged valvetronic instead of trying to actuate it via software… when the dme sees valvetronic not working right it disables it with the valves at maximum lift. the car continues to drive fine with disabled valvetronic.
Can you unplug eccentric shaft sensor?
By disconnecting the eccentric shaft sensor, the DME will put the valvetronic into emergency running mode. The valves will go to full lift via the DME activating the valvetronic motor and the accelerator will work off the throttle body. In layman’s terms it will run like a conventional non valvetronic engine.
What does the Valvetronic motor do?
The Valvetronic system is a BMW variable valve lift system which, in combination with variable valve timing, allows infinite adjustment of the intake valve timing and duration. The system claims to improve fuel economy and emissions, and negates the need for a throttle body in regular use.
What is a valvetronic fault?
This fault code indicates that your BMW’s valvetronic system eccentric shaft is no longer working properly as a result of wear and tear in certain parts of the shaft.
How do you read a BMW code?
- Standalone diagnostic device. Using a standalone diagnostic device to read out the error memory is easy and fast.
- Laptop with software and OBD cables. You can also read a BMW’s error memory with a laptop.
- Your smartphone and an OBD2 adapter.
What does a BMW eccentric shaft do?
This gives faster and more precise throttle response. What controls valve lift is an electric motor and an eccentric shaft that adjusts the valve lift. The eccentric shaft sensor measures the rotation of the eccentric shaft that translates into how much valve lift there is. The sensor itself is a HALL effect sensor.
What is BMW VVTI?
Variable valve timing is a regular feature of modern motors. Before the invention of this technology, valve timing was restricted to the type of camshaft used. In short, VVT controls the timing of the intake and exhaust valves opening and closing. Valve timing impacts performance, emissions, and fuel economy.
Can you drive with a bad valvetronic motor?
If valvetronic fails, your electric throttle body takes over. Your engine is currently operating as a regular engine with a throttle. It is safe to drive to the mechanic. The most common problem is the eccentric shaft sensor.
What does valvetronic eccentric shaft sensor do?
The eccentric shaft sensor is responsible for controlling valvetronic timing, and has been known to be a common issue. If your car has been experiencing difficult starts, low fuel economy, and overall lack of engine power and performance, this component may be to blame.
Does the N55 have Valvetronic?
Design. The main differences between the N55 and its N54 predecessor are the use of a single turbocharger, the addition of Valvetronic and the type of fuel injectors.
Where is Valvetronic located?
Located in Pennsylvania, our team is obsessed with sound. From our marketing department to all of our highly trained engineers, we all have one goal of developing, manufacturing, and delivering the worlds greatest exhaust systems.
What is Valvetronic exhaust?
Valvetronic Technology Fi EXHAUST. The valvetronic technology allows an exhaust system to control the gas flow, sound frequency, and overall performance. This allows the sports car to have higher torque at low RPMs and even higher horsepower at higher RPMs.
How do you unlock the hidden menu on a BMW?
How can I read my BMW code without a scanner?
How do you clear the code on a BMW without a scanner?
What does eccentric shaft mean?
The eccentric shaft is an essential part of the fully variable valve lift control. The valve lift changes continuously from maximum to almost zero by rotating / pivoting the eccentric (shaft) by means of an electric motor.
Where is the eccentric shaft sensor?
What RPM does VANOS kick?
3500 RPM on E36 or very close to that number.
What happens when VANOS fails?
If the VANOS system fails, your BMW will be unable to properly regulate its fuel usage. As such, it may start to burn through more fuel than normal. Simultaneously, your vehicle may also sputter and accelerate sluggishly, as its engine will struggle to push out the increased amounts of fuel through the exhaust cam.