The warning gives you plenty of notice of your brake wear. Conservatively speaking, if you are a really hard driver, you could expect up to 800 to 1000 kilometers more from your brake pads. If you are a gentle driver, up to 2000 kms quite easily, before they damage the brake discs.
Table of Contents
Why is my brake light on in my BMW 328i?
If you see the BMW brake light in your BMW, it’s usually not cause for worry. The problem is most likely due to an electronic issue, and not a brake pad malfunction, and it can usually be resolved by resetting the brake pad lights.
How do you reset the brake light on a 2008 BMW 328i?
Why does my brake pad warning light come on?
Your brake warning lights may start to flash, or display in amber or red, in the following situations: Your brake fluid has started to leak. The car is experiencing a sensor failure, which erroneously triggers the brake warning light. The brake pads have become overly worn and need replacing.
What does the brake light mean on a BMW?
This is a sign of something wrong with your vehicle’s braking system. It doesn’t necessarily mean you should panic, though – unless the light stays on after you come to a complete stop and switch off the engine. In this case, it could indicate serious damage or malfunctioning components that need immediate attention.
How long can you drive after brake pad warning light BMW?
The warning is supposed to come on at about 3mm of pad remaining, and new pads usually come with about 8mm of pad, so you can easily have 30% pad life remaining which may be good for another 10-20k miles.
Why won’t my brake warning light go off?
If it remains lit after the parking brake is released or if it turns on and off intermittently while you’re driving, it means you need to add brake fluid. If you check the fluid, add as needed and the light still doesn’t turn off, you’ll need to have the brake system inspected.
How do you reset the brake sensor on a BMW 328I?
How do you reset the brake light on a dashboard?
- Push the brake pedal a few times to ensure contact between the brake pads and discs.
- Switch the dashboard off for a few seconds.
- Turn the dashboard back on again and see if the light still remains. If the brake warning light is still illuminated, then seek assistance and advice.
Why is my BMW brake reset unsuccessful?
The warning means the sensor was tripped. Once tripped it must be replaced to do a reset. You also may need to clear the fault codes with an OBD diagnostic tool before a reset is possible. If you replace the sensor and try to reset and it still says “reset impossible” you’ll definitely need a scan tool.
Why is my brake light on but brakes work fine?
Defective Sensors – Sensors located in the brake master cylinder measuring brake fluid or the parking brake sensor may fail, prompting the brake light to come on. An expert on brake repair should be able to identify the sensor that has caused the light to come on and replace it.
Is it OK to drive with brake light on?
Again, it is important that you do not continue driving and ignore the brake light, this can cause more damage to the braking system and be very dangerous. *Pro Tip: when you first turn on your vehicle, all the lights on the dashboard should illuminate.
How do I know if my BMW brake pads are worn out?
Feeling for any vibrations: When the brake pads are wearing down, you may feel a vibration when pressing down on the brake pedal. You may feel a vibrating steering wheel, too, which could also indicate brake pad issues. Check the wheels: Brake dust accumulation in the wheel is a sign of normal wear.
How much does it cost to replace BMW brake pads?
BMW brake pads replacement, which includes parts and labor, can cost anywhere between $150 and $300 per axle depending on the type of brake pads desired and the extent of the damage your previously worn down pads have caused to the other components of your vehicle such as the rotors.
How do you clear the brake light on a BMW?
How do you reset the brake warning light on a BMW 3 Series?
Push and hold the “BC” button of the turn signal stalk until it states “Reset?” let go of the button and push the button back in and hold, a little clock will come up, once the clock graphic besides the reset goes away let go. Turn the car off and resart as normal.
What does brake system drive moderately mean?
It’s fine, just means that you’ve triggered the brake sensor in the pad. The idrive is just an estimate, this warning comes up when the pads physically trigger the sensor at a set wear level.
How do you know if your brake fluid is low?
- Brake warning light illuminated on your dash.
- Brake fluid appears low, discolored, or dirty.
- Brake pedal feels spongy or mushy.
- Vehicle has a longer stopping time than usual.
Can worn brake pads cause brake light to come on?
If after checking for leaks the brake warning light remains on, it may indicate an issue with your brake pads. If your brake pads have become significantly worn, this may trigger the light. Some cars do have a separate warning light for worn brake pads, which looks like this.
Is it safe to drive with ABS and brake light on?
If both the ABS and the brake system light come on at the same time, your vehicle is no longer safe to drive. This means there is a serious problem with the car’s braking system and continuing to drive puts yourself and others at risk.
How do you test a brake sensor?
How do BMW brake sensors work?
It works by measuring resistance.It is a dual stage, so there are 2 wires in the sensor that when worn through, change the resistance values. That makes it a 2 stage warning of wear indication.
What kind of brake fluid does BMW use?
Brake fluid for a BMW is either Normal or Low Viscosity and should be rated as either DOT4, DOT5, or DOT5.
How do you reset the brake light on a BMW f10?
How do I reset my f30 brake sensor?
