If the customer is coming to you, the vehicle is probably over its 100,000-mile warrantee. In most, if not all other vehicles that have the 8 speed ZF transmission, the manufacturer recommends a transmission fluid and filter change at 70,000 to 80,000 miles. This is also the interval that ZF themselves recommend.
Table of Contents
How reliable is the ZF 8 speed transmission?
As said above, the ZF 8-speed is an incredibly reliable transmission. In its nearly ten years of use, internal faults have been scarce, many of which have been user-related. If there is anything to look out for, it’s the occasional fluid leak.
Why is the ZF 8 speed so popular?
Beyond performance, the eight-speed’s appeal is rooted in its versatile modular design. It can accommodate a maximum torque output from as low as 162 pound-feet up to 770. It is compatible with a variety of all- and four-wheel-drive systems, such as an integrated center differential or a two-speed transfer case.
Who uses ZF 8-speed?
The BMW M5. The Jeep Grand Cherokee Trackhawk. The Rolls-Royce Phantom. Though these cars are all different, there’s one thing they (and many other cars) have in common: ZF’s 8HP eight-speed torque converter automatic transmission.
How often should you service a ZF gearbox?
The German top manufacturer of transmission ZF recommends oil change every 8 years or 100,000 km. The oil change interval is actually set by the type of the transmission and also by the strength, or how long it is designed to be.
How much power can the ZF 8 speed handle?
According to their website, the maximum torque for the 8 speed ZF transmission is 730 lbs ft.
Why is BMW moving away from DCT?
The real reason is that the ZF eight-speed is more efficient and easier to calibrate for ultimate efficiency. And because efficiency is more important than almost all else in today’s automotive climate, the DCT is a casualty of the times. There’s also the fact that BMW M will soon be making a jump to electrification.
Who has the best automatic transmission?
- Hyundai Santro (AMT) Hyundai Santro.
- Maruti Suzuki Baleno (CVT) Maruti Suzuki Baleno | BS6 Cars you can buy right now.
- Kia Sonet (DCT)
- Ford Ecosport (Torque Converter)
- Volkswagen Vento/Polo (Torque Converter)
- Honda City (CVT)
- Hyundai Creta (DCT)
- Toyota Yaris (CVT)
Where are ZF transmissions made?
ZF opened the Transmission Plant in July 2013 with the production of 8-speed and 9-speed automatic transmissions for the North American Market.
Is the ZF transmission dual clutch?
The dual clutch transmission from ZF enables lightning-fast gear changes under load without interrupting the torque. It is thus ideally suited for vehicles with dynamic/sporty designs.
Is zf8 better than DCT?
The ZF 8HP is just overall better than a DCT. The only drawback is an imperceptibly slower shift. The difference in shift speed is so small very few people would notice and wouldn’t make any difference in the marketing numbers (0-60, 1/4mi, etc).
When should I change my transmission fluid ZF?
ZF recommends a transmission oil change every eight years or 50,000 miles, and that’s a job you can tackle at home.
Is an 8 speed automatic fast?
Does Mercedes use ZF transmission?
FRANKFURT — The drive to improve fuel economy has shifted into a higher gear at Mercedes-Benz AG and supplier ZF Friedrichshafen.
Does Toyota use ZF transmission?
“Toyota partnered with ZF and BMW on the design/layout of shift lever/pedal, decision of final gear ratio, tuning of iMT [rev-matching and upshift smoothing] function, and shift feel.”
Does BMW recommend transmission fluid change?
With that in mind, it’s often recommended by BMW to change the transmission fluid at 50,000 miles and to inspect the transmission filter closely when you do.
What oil goes in a ZF transmission?
3/4-speed automatic transmissions: ZF 3 and 4-speed automatic transmissions must be filled with approved ATF oils according to ZF list of lubricants TE-ML 11, lubricant class 11A / 11B or with mineral ATF oils according to the former Specification Dexron II / Dexron III by General Motors.
How long does BMW gearbox oil last?
For most manual transmissions, you should change your fluid every 30,000 to 60,000 miles; for most automatic transmissions, you should change your fluid every 60,000 to 100,000 miles.
Does Audi use ZF transmission?
Audi will widely use an eight-speed automatic transmission produced by ZF, instead of a six-speed unit on cars sold in the United States, according to AutoWeek.
What kind of transmission is in a hellcat?
Standard on the SRT® Hellcat Redeye Widebody is the TorqueFlite® eight-speed automatic transmission for a hell of a ride that improves performance and overall efficiency.
How much power can a BMW ZF gearbox handle?
It is designed for longitudinal engine applications, and is rated to handle up to 600 newton-metres (443 lbf⋅ft) of torque.
What is the strongest BMW gearbox?
The G420 is one of the strongest BMW transmissions to date. Able to handle 600+ HP these transmissions are unbelievably reliable in high horsepower applications.
Who makes transmissions for BMW?
If you weren’t aware, BMW does not manufacture their transmissions. Instead, General Motors and ZF are the two major suppliers for automatic transmissions for BMW vehicles.
What is a ZF manual transmission?
ZF automated manual transmission (AMT) technology is designed to automatically engage clutch and gear shift actuation. AMT can do away with frequent shifting to improve driver comfort, reduce stress and fatigue, and support drivers with concentrating on traffic conditions.
Is BMW DCT reliable?
DCT is a very strong unit. It is rated for 9000rpm and 400lb-ft of torque. BUT strong doesn’t mean reliable. At the end, it is more complicated than the MT, and more complicated means less reliable.