How long is labor for water pump?

A simple replacement should take around two hours, but more complicated work trying to fix a water pump (which will save you money on parts) can take four or more hours.

How much does it cost to replace a water pump on a BMW X5 2008?

Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor).

How long does it take to replace BMW water pump?

4-6 hours is about right.

How much does it cost to replace a water pump on a BMW X5?

The average cost for a BMW X5 water pump replacement is between $1,150 and $1,322. Labor costs are estimated between $363 and $458 while parts are priced between $787 and $864.

How long does a water pump last in a BMW x5?

Water pumps are designed to last at least 100,000 miles, however, if your water pump fails, you should replace it with a high-quality original-equipment level unit. Less expensive replacement pumps are available, but they might only have a service life of 30,000 miles.

Is there a recall on BMW water pump?

Recall summary Because of the faulty design of the recall cars, the circuit board controlling the pump may overheat and start burning the water pump when working in high temperatures. This could potentially result in an engine fire and also cause the pumps to fail.

How many hours does it take to replace a water pump?

On average, water pump replacement is a 3 hour job. You may pay less if you buy the pump yourself and give it to the mechanic to install, though use caution and make sure to buy the parts from a reputable source.

Should you replace thermostat when replacing water pump?

its a good idea to replace the thermostat whenever replacing a water pump. The thermostat may have suffered some damage during the overheating that occurred before the water pump failed.

When replacing a water pump What else should you replace?

So when the water pump must be replaced, it is a good idea to go ahead and also replace the timing belt, timing belt tensioner and idler pulleys.

How much is the labor to install a water pump?

But typically depends on the type of vehicle you drive and the auto repair shop you take it to. Labor costs are between $256 and $324 while parts cost between $205 and $314. Estimate doesn’t include fees and taxes.

How long does it take to change a water pump and timing belt?

How long does a timing belt and water pump replacement take? The average time taken for a water pump and timing belt change is between 3 to 6 hours.

Can I replace a water pump myself?

You can save a lot of money by replacing a water pump by yourself. Be sure to properly install gaskets and tighten bolts to manufacturer specs, and always dispose of the old coolant in an environmentally friendly manner.

Why does BMW use electric water pumps?

Electric water pumps run off of your car’s battery and help you maintain your car’s horsepower and fuel economy. Typically, electric water pumps are seen in racing cars, but including them in their cars is simply part of the luxury of the BMW brand.

What year did BMW start using electric water pumps?

Electric pumps do have a place on street-driven cars, in fact BMW began using electric water pumps around 2007 and several other manufacturers are working on similar versions.

How do I know if my BMW water pump is bad?

  1. Coolant Leaks.
  2. High-pitched Whining Sounds.
  3. Engine Overheating.
  4. Steam Coming From The Radiator.
  5. Higher Mileage.
  6. Routine Maintenance.
  7. Regular Coolant Changes.
  8. Any Change In Your BMW’s Performance.

How long do BMW electric water pumps last?

On these water pumps, we suggest replacement at the 80,000 mile interval. Failure usually occurs very soon after the car hits this milage mark.

Is water pump covered under BMW warranty?

Powertrain: The warranty coverage covers parts that mechanically propel your vehicle. Engine – Covers the engine block, control module and water pump. Often specific parts will be excluded from the Powertrain warranty. Your warranty will list specific parts for your vehicle.

How do I know if my BMW has a recall?

For general information regarding recalls, please call the BMW Recall Hotline at (800) 525-7417. Please allow up to 30 days after completion of a recall on you vehicle for this data to be updated.

Do you replace water pump with timing belt?

Generally, the idler pulleys, tensioner and water pump should always be replaced when the timing belt is replaced. In most cases, the timing belt drives the water pump, so it is the right time to replace the water pump. It is also recommended by the manufacturer.

How much does it cost to change timing belt and water pump?

When the job is done, all these components will be changed out. In most cases, a timing belt kit will run between $100.00-350.00. Labor on most timing belts is between 3-5 hours, putting your total cost between $400.00-1,000.00.

What happens when water pump goes out while driving?

A dead or dying water pump cannot circulate coolant through your vehicle’s engine and, as such, the engine will overheat. The hotter the engine gets the greater the chance of serious damage, including a cracked engine block and damage to the cylinders, pistons, and head gasket.

Do you have to put sealant on water pump?

3. Don’t apply sealant to an O-ring or a dry seal. When changing a water pump, replace all old gaskets and seals with new ones. If your new pump comes with a seal, make sure it’s in impeccable condition before installing it.

Does the thermostat control the water pump?

There is a key misconception in the question: when a car’s engine thermostat is closed, the water pump is still circulating water through the engine block, through a bypass circuit. The closed thermostat only prevents coolant from circulating through the radiator, until the engine reaches operating temperature.

Do you have to drain coolant when changing thermostat?

With a normal top-mounted thermostat you need drain only part of the cooling system . Do not drain it while the engine is hot — you may be scalded. Wait for the engine to cool. Drain the coolant from the radiator tap, or from the bottom hose, until it is below the level of the thermostat housing.

Will K seal fix a leaking water pump?

K-Seal can repair most leaks in your engine’s water pump casing and seals.

Do NOT follow this link or you will be banned from the site!