How much does BMW charge for battery change?

Spread the love

How Much Does a BMW Battery Cost? The cost of parts and installation will vary between models, but your BMW battery replacement cost will likely come in between $300 and $500 when you factor in parts and labor.

Do I need to reprogram my BMW after changing the battery?

Apart from the registration procedure, you also have to code your BMW computer. It’ll be necessary each time you replace your battery, no matter its specifications – whether your battery is similar or extremely different from your old one.

How do I reset my BMW after changing the battery?

  1. First of all, turn the ignition key of the BMW car to the accessory position once the lights and radio are on. You have to do this before starting the vehicle.
  2. Again, press the “Trip” button and hold until Reset appears.
  3. Then, press the same button for the third time.

Do I need a special battery for BMW?

Conventional car batteries can be used for BMWs with average power requirements. Therefore, you don’t need a specific BMW car battery if your car doesn’t have sophisticated car accessories or a start-stop system.

How do I reset my BMW 328i after replacing the battery?

What happens if you don’t Program BMW battery?

If you don’t register it with the car, it causes the car to charge it too much or too little. Older batteries get more charge sent to it than newer ones, so putting a new battery in will cause the car to overcharge it, which prematurely kills your battery.

How much does it cost to replace a BMW 328i battery?

The average cost for a BMW 328i battery replacement is between $504 and $530. Labor costs are estimated between $97 and $122 while parts are priced at $408. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Where is the battery in a 2008 BMW 328i?

Where is the battery on a 2008 BMW?

Do car need to reprogram after changing battery?

Most car manufacturers, as well as BMW, work with an open system, i.e. the independent aftermarket can install a suitable replacement battery without having to reprogram the vehicle electronics.

What to do after installing a new battery?

After replacing a car battery, you should run the car for about 30 minutes to allow the alternator to fully charge the battery. Usually, a battery replacement also causes the vehicle’s computer and radio to reset. This might mean that you have to reset your radio presets.

How do I reprogram my car after changing the battery?

  1. Detach the battery cable for two to three minutes.
  2. Reconnect the battery and start the car.
  3. Drive the car for at least 10 miles to let the engine control units find any potential problems.

What brand of battery does BMW use?

BMW does not manufacture batteries but they are manufactured for BMW using AGM technology by a German manufacturer and do have a BMW original equipment label on them and are marketed as BMW original eqipment battery. Exide is maybe an approved replacement,but is not what the car comes with.

How do I know if my BMW has an AGM battery?

On to the type of battery which is very simple to determine with factory original BMW batteries, a white battery is a standard lead acid battery, and a black battery indicates an AGM (Boron-Silicate absorbed glass mat).

How do I know if my BMW battery is dying?

  1. Slow engine crank: A BMW that cranks slowly, even if the engine starts, is among the first signs that its battery is beginning to fail.
  2. An engine that refuses to crank: This one is sure to call for a battery checkup.

Do you really need a memory saver when changing car battery?

“They are not effective or worth the risk. I-CAR also teaches not to use them.” Jeff Peevy, I-CAR’s director of field operations, concurred. “A memory saver can complete circuits that removing the battery opens in order to protect the system, and so a memory saver could put systems at risk,” Peevy said.

How long does it take for a BMW computer to reset?

You can reset a BMW ECU by unplugging the negative battery cable for 10 to 15 minutes. This should be enough to reset the ECU in most BMW models. If this doesn’t work, you can also try jumpstarting your car to reset it. This will also help if the issue is a drained battery!

What happens if I disconnect my BMW battery?

Warning: Regardless of the year, make or model of vehicle, never disconnect the battery while the engine is running or the ignition is on. Doing so can create a high-voltage spike in the electrical system that may damage electronic modules and/or the charging system.

How do I register my BMW battery at home?

What scanners can register a BMW battery?

A battery registration must be performed with a BMW OBD2 scanner (also known as a BMW diagnostic scanner or code reader). The BMW scanner tool is simply plugged into the OBD2 port underneath the dashboard of your vehicle which connects electronically to the engine control module (DME).

Is it safe to jump start a BMW?

DO NOT jump-start the car and DO NOT let any roadside assistance service install a new battery in your BMW. It can be the most expensive battery or jump start of your life.

How long do BMW 328i batteries last?

Your BMW 328i battery will typically last between 3 to 5 years, but that can vary heavily depending on weather conditions type of battery, battery size, and driving habits.

How long do BMW hybrid batteries last?

Hybrid batteries tend to last between 6-10 years on average. There are outliers in both directions, and warranty often covers when they fall below their life expectancy. Although the battery is not serviceable for the typical consumer, they do offer warning signs that service or replacement may be needed soon.

How do you charge a BMW 328i battery?

What battery does a BMW 3 Series used?

AGM Battery (AGM94R-800) by Torxe™. Battery Type: AGM. Cold Cranking Amperage: 800.

Do NOT follow this link or you will be banned from the site!