How much does it cost to have a wheel speed sensor replaced?


Sharing is Caring


It will cost between $200 and $400 to replace an individual speed sensor, and there is one for each wheel. Typically, they should be replaced every 30,000 to 50,000 miles.

How much does it cost to replace BMW wheel sensor?

The Best in Auto Repair The average cost for a BMW 328i wheel speed sensor replacement is between $175 and $231. Labor costs are estimated between $46 and $58 while parts are priced between $129 and $173. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Can I drive with a broken wheel speed sensor?

However, when it comes to wheel speed sensors, a minor-seeming glitch may turn into a major safety risk. That is why in general, it is unsafe to drive a vehicle with a broken wheel speed sensor.

How much does the ABS sensor cost for BMW?

Most Popular BMW ABS Speed Sensors The average price of a BMW abs speed sensor is between $15.99 and $43.99.

How many ABS sensors are on a BMW 328i?

Three-channel four sensor ABS: One sensor is installed on each wheel, but a single controller monitors the rear wheels.

How many wheel speed sensors does a BMW have?

Modern vehicles have four wheel speed sensorsโ€”one for each wheel of your car.

Is it easy to replace a wheel speed sensor?

To test drive, go down a safe road where you can speed up and hit your brakes hard to try and engage your ABS and make sure it is working properly. Replacing a wheel speed sensor is a very straightforward job with the right tools and knowledge.

How long does it take to replace a wheel speed sensor?

Replacing a tire pressure sensor can take anywhere between 10 minutes to an hour. It’s recommended to have your tire sensor replaced by a professional, especially if you’re not familiar with the equipment.

Is replacing a speed sensor easy?

Fortunately, it is easy to replace a wheel speed sensor and takes you about an hour at maximum. You can also remove the ABS wheel speed sensors separately keeping other parts integrated into the wheel bearing hub assembly.

What causes wheel speed sensor failure?

Corrosion, affecting the air gap spacing and weakening the sensor’s signal strength. Road debris blocking the sensor, rendering it inoperative or causing mechanical damage. Particles of metallic debris attached to a wheel speed sensor magnetic encoder ring. Contaminated wheel speed sensors.

Is a speed sensor expensive to fix?

The average cost for vehicle speed sensor replacement is between $280 and $325. Labor costs are estimated between $117 and $148 while parts are priced between $163 and $177. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How often should wheel speed sensors be replaced?

When do I need to get a speed sensor replacement? You’ll need to get a speed sensor replacement around every 100,000 miles on your car’s odometer. However, it might be smart to think about replacing it a little earlierโ€”as you won’t want to wait until your car is on the verge of breaking to get an important part sorted.

Can I replace ABS sensor myself?

If the ABS speed sensor fails or does not work properly, you can replace it on your own.

Can I drive my BMW with ABS light on?

If your ABS light comes on individually, you are safe to drive your car to your destination, as your normal brakes will still work. You will, of course, have to be more careful as your ABS will not respond in case of an emergency.

How much does it cost to fix BMW ABS?

The Best in Auto Repair The average cost for a BMW 328i ABS control module replacement is between $1,638 and $1,710. Labor costs are estimated between $279 and $352 while parts are priced at $1,359. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Can AutoZone check ABS sensors?

It Might Be the ABS Unfortunately, the only way to check whether or not the problem is with the ABS is to go and get the codes of your car read. AutoZone can scan your codes as part of our Fix Finder service, or you can do it yourself if you already have a scan tool.

Is ABS the same as wheel speed sensor?

The ABS sensor is also called the wheel speed sensor or ABS brake sensor. Since all the wheels do not turn at the same speed, the ABS sensors report the speeds of all the four wheels to the ECM, based on which the ECM determines if the wheels are locking up.

What are the symptoms of a failing ABS sensor?

  • Sign #1: The ABS Light Stays On.
  • Sign #2: Traction and/or Stability Control is Disabled.
  • Sign #3: It Takes Longer to Stop Your Vehicle.
  • Sign #4: Your Vehicle Becomes Unstable During Braking.
  • Sign #5: ABS Works Erratically.

Will check engine light come on for wheel speed sensor?

Common signs include harsh or improper shifting, cruise control not working, and the Check Engine Light coming on.

Can wheel speed sensors be cleaned?

With the sensor free, take your rag and wipe the sensor until it’s clean. I prefer not to use any chemicals on the sensor to avoid potential problems. If, however, the sensor is really grungy, use a mild soapy solution and rinse well. The ABS sensors are precision instruments in a crude environment.

How do you test a BMW speed sensor?

YouTube video

What happens if wheel speed sensor fails?

A failing wheel speed sensor will turn off your vehicle’s traction control, stability control, or any other driver assist feature. Sometimes, a damaged wire could also prevent the sensor from sending data to the control module.

What happens if a speed sensor is broken?

When there’s no speed signal coming from the sensors, shifting of gears will be a problem because the powertrain control module won’t control them correctly. This will make the transmission not work properly. It will either shift more quickly or roughly than expected.

Can you drive a car without a speed sensor?

Can you drive with a bad speed sensor? In general, it is unsafe to drive a vehicle with a broken wheel speed sensor. The car’s computer will not be able to determine the speed that your vehicle is traveling, so it might apply the brakes at a faster rate than necessary or increase the engine power.

How do you reset a wheel speed sensor?

YouTube video

Craving More Content?

  • What is LCI?

    By definition, LCI is the compilation and quantification of all natural resources consumed and all substances emitted into environment by the life cycle system (emissions and…

  • What voltage should a BMW battery read?

    Check the voltmeter reading. It should be around 12.45 volts, but not more than 12.7 volts. If the reading comes in below this range, it might…

  • Why is my turn signal light not working?

    You may be dealing with bad bulbs, a bad flasher relay, a faulty turn signal switch, or a bad wire or connector between the flasher unit…

Carolina's BMW