A typical serpentine belt generally starts at around $15 and goes up to $80 at most. Add to that the labor costs that can range from $75 and $120. Altogether, you’re looking at around $90 to $200 (plus taxes and fees) to replace your serpentine belt.
Where is the serpentine belt diagram?
Some vehicles have the serpentine belt diagram located on a decal somewhere in the engine compartment. But if your car does not have a decal, you can easily look up the diagram in a repair manual or repair database. Another option is to take a photo of the old belt before removal.
How long does it take to replace a serpentine belt on a BMW?
With the right tools in your hand, replacing the belt won’t take you any longer than 30-minutes.
How much is it to replace a serpentine belt on a BMW X5?
BMW X5 Serpentine Belt Replacement Cost Estimate. The average cost for a BMW X5 serpentine belt replacement is between $213 and $260. Labor costs are estimated between $160 and $202 while parts are priced between $52 and $57.
Does a BMW X5 have a serpentine belt?
Your BMW X5 will be happy to know that the search for the right Serpentine Belt products you’ve been looking for is over! Advance Auto Parts has 38 different Serpentine Belt for your vehicle, ready for shipping or in-store pick up. The best part is, our BMW X5 Serpentine Belt products start from as little as $11.99.
Where is the engine drive belt diagram?
Belt routing diagrams are generally located in the “Engine Mechanical” or “Cooling System” articles. Included in many of these sections are component identification, pulley alignment, tension chart, belt and tensioner inspection procedures, along with any adjustments if applicable.
What happens if you put a serpentine belt on backwards?
If you put the belt back on in the opposite direction, the ribs end up in different pulley grooves than the ones they’ve adapted to over time. This means that the belt has to re-adjust to a new abrasion pattern, which will lead to a dangerous loss of belt tension.
How much does it cost to replace a serpentine belt on a BMW?
Typically, a serpentine belt replacement may cost around $100-$195. This includes both labor charges ($75-$120) and spare parts ($25-$75).
How expensive is it to replace a serpentine belt?
The cost of the serpentine belt itself could be around $50 and the cost of labor could be around $150. As a result, a serpentine belt cost for replacement could range from $70 to $200 depending on your exact model and where you get it replaced.
When should I replace my BMW drive belt?
Mileage Indicators Today, most serpentine belts are expected to last anywhere from 60,000 to 100,000 miles. Some belts can last significantly longer than this, while others give out before 60,000 miles. Make sure to check your owner’s manual to find out the recommended belt replacement time frame.
How long does a serpentine belt last?
Of the parts that will eventually need to be replaced in your vehicle, the serpentine belt is one of the most important. How long does a serpentine belt last? Being made of durable rubber, a serpentine belt can last anywhere from around 50,000-100,000 miles.
What does the serpentine belt control?
A serpentine belt is one long rubber belt along your car’s engine that provides power to many vital components in your car like the alternator, power steering pump, air conditioning and sometimes the water pump, according to Firestone.
Can you replace serpentine belt yourself?
Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.
How do I know if my serpentine belt is bad?
A squealing or noisy belt is one of the most common symptoms of a slipping or worn serpentine belt. Squealing can be more pronounced when you’re climbing a hill and running your heater or air conditioning at the same time. Squealing can also occur after you drive over deep puddles or have an undercarriage car wash.
How do you put a serpentine belt on without a tensioner?
If your vehicle does not have an auto tensioner, insert a pry bar or piece of wood between the alternator and the engine. Run the belt over the alternator pulley, then use the bar to pry the alternator away from the engine and increase the tension on the belt. Tighten the bolts again as you apply tension.
How do I know if my serpentine belt is misaligned?
Does belt direction matter?
Clockwise. Traditionally women wear their belts the opposite direction that men do. Men wear belts counter-clockwise, and women wear it clockwise, if you’re looking down at the belt.
What does glazing on a serpentine belt mean?
A serpentine belt that is shiny looking is referred to as a glazed belt. This glazing happens as the belt is polished from slipping on the pulleys; usually due to a lack of grip from belt wear, or a belt tension problem. Once a belt glazes, it will usually never grip properly, no matter how tight it is adjusted.
What happens if serpentine belt breaks while driving?
This can lead to a sudden lost of power assist for the steering system, leading to the steering wheel all-of-a-sudden becoming very hard to turn. A broken serpentine belt may stop the water pump from circulating coolant through the cooling system, causing the engine can overheat.
How long does it take to change serpentine belt?
It usually takes approximately thirty minutes for a mechanic to replace a serpentine belt. With the right tools and equipment, an auto mechanic can complete the process within thirty minutes to an hour.
What happens if your belt breaks while driving?
If the belt breaks while you are on the road, the car will break down immediately – and your engine can experience very serious damage. You need to look out for signs and symptoms of a weakening timing belt so that you can take action before it is too late.
Does serpentine belt affect acceleration?
Can A Bad Serpentine Belt Cause Acceleration Problems? Yes, it could. Bad serpentine belts cause loss of power. Especially in situations where slippage occurs and the alternator supplies power to the ECM.
What causes Fanbelt noise?
Our research has shown two main causes of belt noise: The belt squeals because there is improper tension in the belt drive system. This is usually caused by a worn automatic tensioner, but other causes can include a contaminated belt (oil, belt dressing, etc.) or a belt that is too long or worn out.
Is a tensioner pulley the same as an idler pulley?
The primary distinction between tensioners and idler pulleys is the presence of an adjustable bolt. Tensioners are positioned on the bolt through mounting. Idler pulleys are not mounted to an adjustable bolt. However, the differences between idler pulleys and tensioners also extend to purpose.
Is timing belt the same as serpentine belt?
A timing belt has horizontal “teeth” that are made to fit both the crankshaft and camshaft. In contrast, a serpentine belt has multiple V-shaped grooves that appear vertically along the belt. Over time, these belts need to be replaced (roughly around the same time).