The cost of a coolant flush depends on your vehicle’s coolant capacity, and whether or not you are flushing the system with chemicals or soap before refilling it. Typically, you can expect to pay between $100 and $150 for this service on most vehicles.
Table of Contents
How do you drain and flush a BMW 328i coolant?
Do you have to do a whole coolant change on a BMW?
How often should you change coolant in a BMW? Typically, you should have your BMW coolant flush completed every 30,000 miles or every two years. There are some instances where your vehicle can go without a flush for a longer period of time.
How do you put coolant in a 2008 BMW 328i?
- Find Reservoir – Locate the coolant reservoir and clean it.
- Check Level – Determine the coolant level.
- Add Coolant – Determine coolant type and add fluid properly.
- Replace Cap – Secure the coolant reservoir cap.
How much coolant does a 2008 BMW 328i hold?
2 gallons total. 1 gal BMW coolant +1 gal distilled water.
How much does BMW charge for coolant flush?
The Best in Auto Repair The average cost for a BMW 328i coolant change is between $276 and $315. Labor costs are estimated between $151 and $191 while parts are priced at $124. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
Why does BMW use blue coolant?
We recommend using BMW’s “Blue” coolant in your car because it is silicate & phosphate free, and has a much longer lifespan inside of your car’s cooling system.
What is the best coolant for BMW?
Zerex G-48 Formula Full Strength Coolant The ZEREX G-48 coolant is ideal for BMW cars. Designed for both diesel and gasoline engines, the coolant has low-silicate, pH, anti-phosphate technology that protects all metals, like aluminum against corrosion.
What color coolant does BMW use?
Genuine BMW green HT-12 antifreeze for optimal cooling system performance. Compatible with all BMW models.
Can I refill coolant myself?
Loosen the reservoir cap just a little, then step back while the pressure releases. Then, remove the cap completely. If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water.
Can I drive my BMW with low coolant?
If the low coolant light comes on while driving, you should pull over at the first safe place you can. To avoid being burned, you need to wait at least thirty minutes for the engine and fluids to cool down. After cooling down, open your vehicle’s hood and check the coolant reservoir.
Can I put any coolant in my BMW?
BMWs have specific coolant requirements (nitrite and phosphate free) to prevent build-up and corrosion of aluminum components, so not just any off-the-shelf antifreeze will do.
What kind of coolant does BMW 328xi take?
Pentosin – Pentofrost NF (G11) Silicate European Concentrate Antifreeze / Coolant – 1.5 Liters (Part No. 8114117)
When should I flush my BMW coolant?
How often should you change coolant in a BMW? Typically, you should have your BMW coolant flush completed every 30,000 miles or every two years. There are some instances where your vehicle can go without a flush for a longer period of time.
How do you flush a BMW cooling system?
With the entire cooling system drained, it’s time to do a quick flush using distilled water. With all the drain plugs back in place, fill the system with distilled water. Turn the car on and put the heater on max. Run the engine until it reaches the normal working temperature and opens the thermostat.
How much coolant do I need for BMW 328i?
Engines used in BMW E90 automatic transmission models hold about 8.2 liters of coolant, manual transmission models hold 8.4 liters.
How much coolant does a BMW hold?
Engines used in the BMW E46 models hold about 8.5 liters of ethylene glycol- water mix, while M3 E46 models hold 10 liters.
How do you take coolant out of a car?
- STEP 1 – Safety first.
- STEP 2 – Press down on the radiator cap, slowly turn it counter-clockwise until it hisses, wait until the.
- STEP 3 – Place a large container under the drain valve at the bottom of the radiator.
- STEP 4 – Loosen the drain valve and allow the coolant to completely drain out.
What happens if you put the wrong coolant in a BMW?
Using the wrong engine coolant can gradually lead to corrosion and damage to the water pump, radiator, radiator hoses and cylinder gasket. This can lead to damage to the engine in the worst case.
Can I use Autozone coolant in my BMW?
1. Go buy a gallon of coolant from your BMW dealer (DO NOT use any other coolant brand).
Is Prestone OK for BMW?
Optimal formula for all BMW ®; All Mini ®; All Volvo ®; Mercedes ® older than 2014; Volkswagen ® older than 1997; Audi ® older than 1997; Jaguar ® older than 1999, Porsche ® older than 1996. This technology regulates your engine’s temperature, prevents freezing and protects the engine from corrosion.
How do you fill coolant in a BMW 328i?
Can I top up BMW coolant with water?
The general consensus is that you require a 50/50 mix of coolant to distilled (never tap) water, while if you live in colder climates then a 60-40 mix of coolant to water is preferred.
Can you put water in BMW coolant?
If your coolant level is low, simply check your owner’s manual and pick up an approved BMW coolant from our parts department. A 50/50 mix of coolant and water will generally suffice, but be sure to check the packaging to see if your coolant comes pre-mixed.
How does Jiffy Lube do a coolant flush?
COOLING SYSTEM FLUSH AND FILL A Jiffy Lube® coolant service starts with an examination of your radiator and engine cooling system. Then, old antifreeze/coolant is removed from your radiator and replaced with new antifreeze/coolant per your vehicle manufacturer’s recommendations.