How To Reset BMW Oil Light? Follow These Simple Steps

Spread the love

As a BMW owner, it’s important to remain vigilant about the condition of your vehicle and keep up with regular maintenance checks. One way to ensure optimal performance is by monitoring the oil light on your dashboard, which may indicate that an oil change is needed.

If you’ve recently serviced your car or changed the oil yourself, resetting the oil light can be confusing without guidance from a professional mechanic. Fortunately, resetting the BMW oil light is a simple process that any car owner can learn.

Our step-by-step guide will take you through the process of resetting the oil light on your BMW so that you can get back on the road with confidence. The procedure involves navigating through various menus on your car’s computer system, but with a bit of patience and our clear instructions, you’ll be able to reset the oil light in no time.

By following these simple steps, you’ll be taking an active role in maintaining your BMW, which can increase its lifespan and value over time. Don’t let a pesky oil light disrupt your driving experience – read on to learn how to reset it!

Understanding Why BMW Oil Light Comes On

Causes of the BMW Oil Light Coming On

The BMW oil light is an important indicator that warns the driver when the engine oil level is getting low or when there’s a problem with the oil pressure. The most common causes of the BMW oil light coming on include:

  • The engine oil level is too low. This could be due to leakage, excessive consumption, or not topping it up.
  • The oil pump or filter is clogged. When these parts are worn out, the engine may experience low oil pressure leading to the warning light switching on.
  • A faulty oil pressure sensor. If the sensor fails or reads wrong information, the BMW oil light will start blinking.
  • An issue with the engine’s oil circulation system. This can cause inadequate lubrication leading to overheating and possible engine failure.

Consequences of Ignoring the BMW Oil Light

If you ignore the BMW oil light, several things may happen including:

  • Your car engine might seize up turning into a potentially expensive repair or even replacement costing thousands of dollars.
  • You risk damaging your catalytic converter, which helps remove dirt from combustion gases further resulting in expensive repairs.
  • Decreased fuel efficiency reducing mileage and increasing maintenance costs over time.
  • In extreme cases, driving without enough oil flow could lead to complete engine failure grounding your vehicle completely until replaced or repaired.
“An ounce of prevention is worth a pound of cure” – Benjamin Franklin

Hence, ignoring the BMW oil light should never be taken lightly as it can have severe consequences for both your car and wallet. Timely maintenance is the key to a healthy engine.

If you find yourself mending towards neglecting the BMW oil warning light, it could help scheduling occasional service appointments with your dealership where a qualified mechanic can detect issues before they become more severe.

How To Reset BMW Oil Light?

The good news is that after fixing the problem causing your BMW’s oil light to come on no matter the cause be it running low on oil or changing the filter, resetting the system is relatively simple, oftentimes just pressing a few buttons. Here’s how:

  • Turn on your ignition by turning the key in position II
  • Press down on the trip reset button until an “oil change” icon appears on the dashboard screen if under model year 2000. For newer models continue to the following steps.
  • Alternatively press “BC” button on the turn signal lever either up or down depending on whether the previous service was interval one or two while still holding/pressing the odometer reset button for about between five and ten seconds,
  • A picture of an oil can appear near the letters BC on the display once complete at the same moment releasing the button means you have successfully turned off the oil service indicator.
  • If prompted use the “+” and “-” buttons next cycle through all available options which include brake fluid test but let go when next under the needed option which will read “Resetting tire pressure?” for models with TPMS sensor or number of miles range notification for ones without always followed by “press reset again”. Hit that “reset” (or BC) repeatedly until “Cancel” displays ensuring successful completion and ending the process.
“Technology not reinvented here.” -BMW Owner’s Manual

BMW has made the process of resetting the oil light quick and easy. However, if you find yourself unsure or lost in your vehicle settings head to a good garage for help.

Remember timely solving any issues that might arise is critical as it helps save time, effort, and money down the line coupled up with scheduling regular checkups at certified dealerships which offer advanced diagnostics for common engine problems. Therefore staying on top of things can aid extending the lifespan of both car and components running smoothly for years into the future.

Locating the Reset Button on Your BMW

If you own a BMW, you might have noticed that after an oil change or service, the “Oil Change Required” light stays illuminated even after you have added new oil. This means that it is time to reset your BMW’s oil maintenance system. To reset this system, you need to locate the reset button. This guide will provide tips on how to find the reset button in different BMW models and what tools you may need.

Finding the Reset Button in Different BMW Models

The location of the reset button varies depending on the model of BMW you are driving. Here are some general guidelines to help you locate the reset button:

  • If you are driving a 1 Series, look for the reset button between the fuel gauge and speedometer on the instrument cluster.
  • If you are driving a 3 Series or M3, look for the reset button on the indicator stalk, located on the right side of the steering wheel.
  • If you drive a 5 Series, the reset button is located on the left side of the speedometer.
  • For X5, X6, or Z4 models, press and hold the odometer reset button on the dashboard until the service menu appears on the display screen.
  • If you still cannot locate the reset button in your particular BMW model, consult your vehicle owner’s manual for complete instructions.

Tools Needed to Locate the Reset Button

You don’t need any fancy tools to locate the reset button in most BMW models, but having a flashlight or headlamp nearby can be very helpful. The lighting inside the car can be dim, especially when trying to see small buttons on the dashboard. Additionally, some models have buttons located in areas that are difficult to reach or see without the use of a flashlight.

Another helpful tool is a set of plastic trim removal tools. These specially designed tools can help you safely remove various parts and covers from your BMW dashboard without scratching any surfaces or causing damage. With a few practice runs and these plastic pry bars, you will be able to access and press the reset button easily.

“Having a headlamp handy while searching for the reset button is always a good idea.” -Dan Deary

Locating the reset button on your BMW can be a bit tricky, especially if it’s your first time trying to find it. However, most models follow similar patterns, making it easier to locate with each oil change and service. By keeping these tips and tricks in mind, you’ll be able to reset your BMW’s oil maintenance system quickly and efficiently.

Resetting BMW Oil Light on Your Own

If you own a BMW, then you know how important it is to schedule regular maintenance for your car. One of the most common and necessary tasks is changing the oil in your vehicle. After completing an oil change, you may notice that your BMW oil light comes on. This can be alarming for some drivers but don’t worry! Resetting the oil light is a straightforward process that you can do yourself.

Steps to Reset the Oil Light Using the Instrument Cluster

The instrument cluster reset method is useful for many models from 1998-2010. Here are the steps:

  • Press and hold down the trip button located between the speedometer and tachometer.
  • Turn the key to position one (first click) while still holding down the trip button. You will see “Test” displayed on the instrument cluster.
  • Release the trip button and immediately press and hold it again. The message “Oil Service” or “Inspection” with “Reset?” should appear.
  • Release the trip button and then press it briefly again to confirm the reset request. You will see a message confirming your success.

Steps to Reset the Oil Light Using the Gas Pedal

This method works for most cars made after 2011:

“To completely reset the service indicator, continue pushing the RESET button until the word ‘ENDS’ appears. Let go and then hold the gas pedal all the way down until the brake warning goes off.” –BimmerTech

Steps to Reset the Oil Light Using the Brake Pedal

This technique is helpful for those who drive newer model BMWs:

“This procedure is applicable to most newer BMW models (2015 on). Turn the key in the ignition without starting your car and wait for a message that says ‘service mode.’ Press and hold down the brake pedal. While holding it, press and release the gas pedal five times quickly.” –BMW of Newport

Steps to Reset the Oil Light Using the Reset Button

The “reset button” method works differently than the previous methods:

  • Turn on your vehicle but do not start the engine.
  • Press and hold the reset button located beneath the odometer until the word “RESET?” appears.
  • Release the button briefly and then press and hold it again until the word “RE” appears.
  • Release the button and wait for the confirmation message before starting the engine.

No matter which method you use to reset your BMW oil light, make sure to double-check that the process has worked before driving your car again. Additionally, it’s important to always follow the oil change schedule recommended by your car’s manufacturer to ensure optimal performance over the long term.

Resetting your BMW oil light does not have to be a daunting task. By following these simple steps, you can successfully reset the oil light and continue enjoying your BMW with peace of mind. It’s essential to stay up-to-date with your car’s maintenance routine, so don’t skip scheduled appointments or ignore warning lights.

Using a BMW Scanner to Reset the Oil Light

As a BMW owner, one of the important maintenance tasks you need to do regularly is change the oil in your car’s engine. Once you have done that, you will need to reset the oil light on your dashboard so that it doesn’t keep flashing and reminding you about doing an oil change.

Benefits of Using a BMW Scanner

If you own a BMW, investing in a professional BMW scanner tool can save you time and money by giving you the ability to perform diagnostic checks and resets on your car at home. One of the easiest and quickest things you can do with a BMW scanner is reset the oil light after changing your car’s oil.

A BMW scanner offers many other benefits such as reading and clearing error codes related to the engine, transmission, ABS brakes, airbags, and other electronic systems within the car. It also allows you to check real-time data streams from various sensors in your car and view live graphs displaying engine performance metrics such as RPM, fuel consumption, and temperature.

How to Use a BMW Scanner to Reset the Oil Light

The process for resetting the oil light using a BMW scanner is straightforward and should take only a few minutes.

  1. Connect the OBD-II port adapter cable to the BMW scanner device and then connect it to the car’s OBD-II port located under the driver’s side dashboard.
  2. Turn the ignition key to the “ON” or “RUN” position without starting the engine. You should see lights come on the dashboard display but not the engine itself.
  3. Select the “Service Functions” option from the main menu on the BMW scanner screen. Then select “Oil Service Reset”. You may also see this option labeled “Oil Light Reset” depending on your scanner model.
  4. Select the appropriate vehicle make and model from the list that appears on the screen, and then follow any prompts to complete the process. Some BMW scanners may require you to input the VIN number or manufacture date of your car before proceeding with the reset process.
  5. If everything is done correctly, you should see a message displayed on the scanner screen saying something like “Oil service light reset: successful”, and the oil light on your dashboard should no longer be illuminated.

Types of BMW Scanners Available in the Market

There are many types of BMW scanners available in the market, ranging from basic models that just read error codes to more advanced models that offer bi-directional control capabilities and live data streaming using Wi-Fi or Bluetooth connectivity.

The most popular types of BMW scanners are OBD-II port adapters that connect to a smartphone or tablet via Bluetooth and use an app to communicate with the car’s onboard computer system. There are also standalone hand-held scanners that have built-in screens and buttons for selecting different functions and menus.

Budget-friendly options such as Foxwell NT530 or Autel MaxiCheck Pro can perform plenty of diagnostics tasks whilst higher-end brands Kreiger, Carly, and Bavarian Technic boast real-time monitoring of engine health, specific-model coding features, and detailed explanation guides making it much easier for beginners to understand certain components of their cars without having to go into great detail on forums or reading tough manuals.

Cost of Using a BMW Scanner to Reset the Oil Light

The cost of a professional BMW scanner tool varies depending on its features and capabilities. Basic diagnostic scanners can be purchased for around $50-100, while more advanced models can cost up to $1,000 or more. However, many of these higher-end models are intended for professional mechanics and enthusiasts who require precise information about their car’s performance.

To keep the cost down, it may be worth considering buying an OBD-II port adapter that can communicate with your phone or tablet via Bluetooth using a free diagnostic app such as BlueDriver or Torque Pro available on both Android and IOS platforms which can offer extensive data without breaking the bank in terms of diagnosis and reset tasks.

“Don’t wait until you have had to scour forums to figure out how to get your BMW back on the road—investing in a reliable scanner tool today will help you save time and headaches tomorrow” -bmwblog.com

Preventive Measures to Avoid BMW Oil Light Coming On

Regular Maintenance of Your BMW

One of the preventive measures you can take to avoid the BMW oil light coming on is to maintain your car regularly. Regular maintenance helps improve the performance of your vehicle while ensuring that everything runs smoothly.

You should check the engine oil level once a month or before you embark on long trips. A low oil level could result in the oil pressure dropping, which may trigger the BMW oil warning light. Additionally, regular servicing ensures that other parts of your vehicle are functioning correctly, including the exhaust, gearbox, and brakes.

“Car maintenance is essential for keeping your vehicle running smoothly over time.” -Brian O’Connell

If you’re unsure when to service your BMW, refer to the manufacturer’s manual for recommendations. You can also determine how much longer until your next service by checking the service indicator lights on the car dashboard.

Using the Right Type of Oil for Your BMW

The type of oil you use in your BMW affects its performance and lifespan. Using the incorrect oil grade could cause premature wear and tear on the engine, resulting in permanent damages. This damage may often lead to the BMW oil light coming on frequently.

To prevent such issues, make sure to use only high-quality synthetic oils designed specifically for your BMW model. Synthetic oils stand out because they offer better performance during extreme weather conditions compared to conventional mineral oils.

“Synthetic oil provides benefits like better viscosity at fluctuating temperature changes, fewer impurities, and enhanced durability than traditional petroleum-based motor oils.”-Consumer Reports

Before purchasing any product, ensure that it meets the specifications provided by the BMW manufacturer. The prescribed specifications will include viscosity levels, rating requirements, and additive content that your car needs for optimal performance.

Monitoring Your BMW’s Oil Level and Quality

In addition to regular maintenance, checking the oil level and quality of your BMW is crucial in preventing any damage from being done to its engine.

You can monitor the oil quality by conducting an oil analysis during every inspection or service interval, allowing you to detect any impurities, metal particles, or other contaminants that could cause wear and tear on the engine components. Additionally, monitoring oil health gives you a chance to catch early issues before they become significant problems.

“Regularly changing the oil will keep all mechanical parts lubricated and working as intended.” -Brian England

To check the oil level on newer BMW models, use the iDrive system to access the vehicle settings and get information regarding the oil status. You can also check the dipstick manually by pulling it out of its compartment, wiping it off with a clean cloth, reinserting it into its slot, then pulling it back out to inspect oil levels. To obtain accurate results, ensure that your BMW is parked on a level surface while checking the dipstick.

  • Conclusion:
  • Owning a BMW requires routine maintenance, including checking oil levels and using high-quality synthetic oils. Adopting these preventive measures ensures proper functioning and longevity while reducing the risk of oil warning light issues.

Frequently Asked Questions

What is the meaning of the BMW oil light and why does it come on?

The BMW oil light indicates low oil pressure or low oil level in the engine. It could also signal a malfunctioning oil pressure sensor or oil pump. It is important to address the issue promptly to avoid engine damage.

What are the different methods of resetting the BMW oil light?

There are several methods to reset the BMW oil light, including using the dashboard controls, disconnecting the battery, or using an OBD II scanner. It is important to refer to the vehicle’s owner manual for specific instructions.

How can I reset the BMW oil light without using any special tools?

To reset the BMW oil light without special tools, turn the ignition to the accessory position, then press and hold the trip odometer reset button until the oil light flashes and resets. This method works for most BMW models.

What should I do if resetting the BMW oil light does not work?

If resetting the BMW oil light does not work, it is important to have the vehicle inspected by a qualified mechanic to diagnose and address the underlying issue. Continuing to drive with a malfunctioning oil light can cause serious engine damage.

Is it safe to drive my BMW if the oil light is still on even after resetting it?

No, it is not safe to drive a BMW with the oil light still on, even after resetting it. The oil light indicates low oil pressure or low oil level, which can cause engine damage if not addressed promptly. Have the vehicle inspected by a qualified mechanic to diagnose and address the issue.

Do NOT follow this link or you will be banned from the site!