the biggest difference in my opinion is their maps. Bootmod3 are the tuners and the programmers. it’s all made in-house by the same team. MHD are only programmers, they buy maps from the third-party tuners and offer them as their off-the-shelf maps.
Table of Contents
How much HP is a Stage 2 335i?
Expected horsepower for the N54 on stage 2 maps is in the ballpark of 330-390whp.
How much HP does a Stage 1 tune 335i have?
On the Stage 1 map, that increased to 345 ft lbs of torque, and 284 hp, which is a lot for just a re-flash of the ECU.
What is Dinan stage2?
Dinan Stage 2 Performance Engine Software safely increases turbo-boost pressure, along with properly retuned fuel mixtures, ignition timing, and full map rescaling. Dinan’s software also removes the top speed governor so the BMW will be capable of achieving its “natural” top speed.
How much HP can stock N54 handle?
The N54 can handle around 600-650whp and 550-600wtq on the stock block and internals.
How much HP does MHD add N55?
N55 horsepower with the MHD stage 2+ tunes comes in at roughly 315-350whp. The power gains are nothing crazy when compared to some other modern turbo BMW engines.
How much does it cost to tune a BMW 335i?
The average cost for BMW 335i Engine Tune-Up is $331.
What is needed for MHD Stage 2?
If you’re trying to get Stage 2+ then you need to buy the Stage 2 kit. It will include regular stage 2 and 2+ with 91/93/95oct maps. If you’re trying to get Stage 2+ then you need to buy the Stage 2 kit. It will include regular stage 2 and 2+ with 91/93/95oct maps.
Is MHD tune safe?
Its a safe tune. Nothing like some of the aggressive custom Wedge tunes your probably referencing for concerns. You have OFT in your signature. If you ran that stage 1 on that has more boost and timing.
How much HP does Dinan tune add?
Yielding nearly 40 WHP / 60 lb-ft of torque more on pump gas over stage 1 (over 70 WHP / 80 lb-ft of torque on race gas) the bump in power equates to a transformation akin to purchasing a completely different vehicle.
What is the Dinan package for BMW?
Dinan Exhaust Systems Dinan’s exhaust products improve exhaust flow by reducing back pressure, giving your BMW increased power and a terrific sporty sound.
Whats faster N54 or N55?
The N55 twin-scroll turbo offers slightly faster turbo spool and delivers peak torque 100 RPM’s sooner than the N54; a characteristic that is not noticeable as each turbo set up spools quickly and delivers impressive torque through-out the low end and midrange.
How long can a tuned N54 last?
The N54 itself is a very strong engine that can often last beyond 200,000 miles. Of course, that’s if you’re willing to keep up with all of the maintenance and repairs for that long. Even when modding the N54 engine it still retains good longevity.
How much boost can a stock 335i handle?
OEM turbos can handle up to 18 psi with supporting mods, going over that is probably not going in increase any performance.
How much HP can N55 handle?
The N55 can handle around 550whp and 550wtq on the stock engine block and internals.
How much HP is a FBO N55?
From the factory, according to BMW, the N55 Inline-6, twin scroll single turbo motor produces 306 HP/ and 295Ft-Lbs. Like most BMW’s, we expect these numbers to be underrated, and we set out to find just how much power it will make.
What is better MHD or JB4?
MHD offers some very cost effective back-end flash maps for the JB4. The back-end flash shifts the timing, VANOS, and fueling to the flash side while the JB4 retains its more accurate boost control, in-dash gauges, E85 autotuning, and various safety features.
How much HP does a full bolt on 335i make?
Out of the box, the 335i comes with a 300hp engine which produces an equal 300ft/lbs of torque.
How can I make my N55 faster?
- ECU Tuning. The engine control unit (ECU) is the brain of every modern engine.
- Cat-Back Exhaust.
- Downpipe.
- Intake.
- Intercooler.
- Charge Pipes.
- Oil Cooler.
- Oil Cooler Thermostat.
How much HP does a Catless downpipe add N54?
High-flow options come at an additional cost, but they’re very well priced compared to other catted options. As with almost any N54 catless downpipes, expect power gains in the ballpark of 15-25whp.
How much does MHD N54 cost?
Purchasing MHD Flash License The cost of the licenses are as follows: N54 – $99. N55 E Series – $199. N55 F Series – $249.
What is MHD for BMW?
MHD Flasher is the first Android and iOS handheld application to bring ECU tuning and monitoring to the BMW N54, N55, S55, B58, S58, S63 and N13 engine.
What is Dinan stage1?
The Dinan Stage 1 Performance engine software is designed for the S55 engine to yield maximum power (for a variety of different octanes), improve drivability, and the removal of the factory speed governor for unadulterated entertainment.
How much does a Stage 2 cost BMW?
It is definitely around 10-11 hours, including tax, fluids and gaskets, expect to pay between 1300-1500 depending on the shop.
Does Dyno tuning add horsepower?
During a Dyno Tune, your technician will make changes to ensure that your engine delivers smooth power delivery regardless of load or speed. Dyno tuning your motorcycle will give you more horsepower. If you want to get more power from your bike, dyno tuning is one of the best ways to do it.