As said above, the ZF 8-speed is an incredibly reliable transmission. In its nearly ten years of use, internal faults have been scarce, many of which have been user-related. If there is anything to look out for, it’s the occasional fluid leak.
Which BMW uses the ZF transmission?
BMW has ditched the dual clutch transmissions as used in previous M3/M4 models and switched to the latest automatic transmission from ZF the 8HP76. For new G80 M3/M4 owners looking to make more power safely without risking damaging the transmission we have your solution.
How long does a ZF 8 speed transmission last?
If the customer is coming to you, the vehicle is probably over its 100,000-mile warrantee. In most, if not all other vehicles that have the 8 speed ZF transmission, the manufacturer recommends a transmission fluid and filter change at 70,000 to 80,000 miles. This is also the interval that ZF themselves recommend.
Do you need to change ZF transmission fluid?
ZF recommends a transmission oil change every eight years or 50,000 miles, and that’s a job you can tackle at home.
Is the ZF 9 speed transmission reliability?
Transmission manufacturer ZF has issued a recall of its nine-speed automatic transmission. This recall affects approximately 505,000 cars, many of which are on U.S. roads. This particular transmission has the unfavorable habit of unexpectedly shifting into neutral during driving.
Is the ZF 8 speed a dual clutch?
Dynamic and efficient: ZF’s innovative 8-speed dual clutch transmission forms the basis for a new flexible modular system for front-longitudinal standard, all-wheel and hybrid drives.
What cars came with ZF transmission?
- 3.1 Alfa Romeo.
- 3.2 Alpina.
- 3.3 Aston Martin.
- 3.4 Audi.
- 3.5 Bentley.
- 3.6 BMW.
- 3.7 Chrysler.
- 3.8 Dodge.
Why is the ZF 8 speed so popular?
Beyond performance, the eight-speed’s appeal is rooted in its versatile modular design. It can accommodate a maximum torque output from as low as 162 pound-feet up to 770. It is compatible with a variety of all- and four-wheel-drive systems, such as an integrated center differential or a two-speed transfer case.
Is the ZF transmission dual clutch?
The dual clutch transmission from ZF enables lightning-fast gear changes under load without interrupting the torque. It is thus ideally suited for vehicles with dynamic/sporty designs. In them, the ZF transmission performs a balancing act between pure sportiness and the highest driving comfort.
Is the ZF 8 a good transmission?
What Makes the ZF 8 Speed Transmission Excellent? The ZF 8 Speed transmission has an overwhelmingly positive reputation within the automobile industry. Its highly flexible design means that the ZF transmission can be used within a huge number of car models, ranging from expensive sports cars to luxury sedans.
When should I service my ZF transmission?
The lifetime of your ZF transmission can be extended with a service every 60,000 miles or every 6 years and in our experience not changing the oil has caused problems including slow or jerky gearshifts and in some cases premature transmission failure.
What cars use the ZF 8 speed transmission?
The BMW M5. The Jeep Grand Cherokee Trackhawk. The Rolls-Royce Phantom. Though these cars are all different, there’s one thing they (and many other cars) have in common: ZF’s 8HP eight-speed torque converter automatic transmission.
What oil goes in a ZF transmission?
3/4-speed automatic transmissions: ZF 3 and 4-speed automatic transmissions must be filled with approved ATF oils according to ZF list of lubricants TE-ML 11, lubricant class 11A / 11B or with mineral ATF oils according to the former Specification Dexron II / Dexron III by General Motors.
Does BMW have lifetime transmission fluid?
ZF 6HP & 8HP Automatic Transmissions 100,000 miles is BMW’s definition of what a “lifetime fill” and that’s passed the extended warranty and “good-will” repair limit, meaning a failure after that is no longer BMW’s responsibility.
Does BMW recommend transmission fluid change?
With that in mind, it’s often recommended by BMW to change the transmission fluid at 50,000 miles and to inspect the transmission filter closely when you do.
Who uses ZF 9 speed transmission?
Acura TLX, Acura MDX, Chrysler 200, Chrysler Pacifica (2017– gas versions only), Fiat Doblò, Fiat 500X, Honda Pilot, Honda Odyssey, Honda Passport, Honda Civic (2018-), Jeep Cherokee (KL), Jeep Renegade, Ram ProMaster City, Range Rover Evoque, Land Rover Discovery Sport, Jaguar E-Pace.
Is a 9 speed transmission good?
Nine-speed transmissions provide better fuel economy with more precise performance. The nine-speed transmission manufactured by ZF Friedrichshafen AG, for Honda and Acura uses 16 percent less fuel than a six-speed at constant speeds, although it takes some getting used to.
What’s better 6 speed or 8 speed?
The highly efficient 8 speed transmission comes with many benefits to the consumer. The first and most sought after benefit is the increase in fuel efficiency. It can improve fuel economy 11% compared the older 6 speed transmission and up to 14% compared to modern 5 speed transmissions.
Where are ZF transmissions made?
ZF opened the Transmission Plant in July 2013 with the production of 8-speed and 9-speed automatic transmissions for the North American Market.
How much power can a ZF gearbox handle?
The transmission has a range of 221 lb-ft to a massive 738 lb-ft, but most applications land between 330 and 550 lb-ft.” “PLEASE NOTE: For those N20/N26 auto cars, there is a current torque limit at or about 350 wtq. Typically cars with DP and 93 can exceed this on our Stage 2 tune.
What is the strongest BMW manual gearbox?
The G420 is one of the strongest BMW transmissions to date. Able to handle 600+ HP these transmissions are unbelievably reliable in high horsepower applications.
What is BMW Steptronic transmission?
The basic functions of the Steptronic transmission include a fully automatic drive mode, a manual/sport drive mode that allows for higher engine revving before shifts, and a manual shift mode that allows the driver to manually shift gears.
Which is best automatic transmission?
A CVT transmission is possibly the best to drive in the city. Because it has an infinite amount of gear ratios, the TCU of a CVT keeps the engine in its sweet spot making this transmission one of the most efficient. With that, as there are no physical gears to change, these are smooth.
What is the difference between 8HP75 and 8HP70?
I would trust your door sticker. The Classic DS model, has the 8HP70, which has a max hp/torque limit lower than the 8HP75 that they started using on the 2019 DT all-new platform. Even those have two versions, one built in-house for Pentastar V6 trucks and one built by ZF for Hemi engined trucks.
What is the difference between 850RE and 8HP75 transmission?
FYI, the 850RE is produced by Chrysler/Stellantis with tech licensed from ZF in Germany, and it is used only with the 3.6L Pentastar V6. The 8HP75 is built by ZF themselves in Germany and imported into the US,, and is used behind all Hemi V8 engine applications, including the 5.7L, 6.4L/392, and the 6.2L Hellcat.