The M52 was primarily used in the E36 3-series and E39 5-series. However, it was also used in a handful of late 90’s E46’s and in a few other cars such as the E38 7-series, and E36/E37 Z3.
What BMW has the S52 engine?
It was released in the E36 320i, to replace the M50. The BMW S52 engine is a high performance variant of the M52 which powered the American and Canadian market E36 M3 from 1996 to 1999.
Is the S52 a good engine?
While it lacks dual-VANOS, ITBs and other tech featured on the S50B30, the S52 is still a very efficient and reliable engine. The S52 still puts out an impressive 240 horsepower and 236 lb-ft of torque with 3.2L of displacement.
Is the S52 iron block?
Yes, you read that correctly; the S52 block from the M3 is the same iron block that’s in any of the 6-cylinder 3-Series models, as well as the same aluminum head.
Whats the difference between S50 and S52?
A big difference is the S50 has dual vanos system, S52 has a single vanos. Maybe specify which s50?!? There is a S50b30US, there is a s50b30 (european) and there is a s50b32 (european). but that can’t be the only reason the S50 is much more powerful.
How much HP can S52 handle?
With the proper performance updates, the S52 engine block can handle upwards of 600 hp without too much stress. If you try to demand even more power, you’ll probably run into trouble with the connecting rods.
How long do S52 engines last?
The cast-iron block and strong bottom end can handle plenty of boost. To that end, stock or lightly modified S52s enjoy incredible longevity. It’s not unheard of to see these engines with over 200,000 miles on them with just routine maintenance.
What is the best engine swap for an E30?
Generally speaking, the best engines to swap into the E30 are the E36 M3 engines, S50B30 and S52B32. Both produce enough power to make the swap worthwhile.
What BMW has the M50 engine?
The BMW M50 engine is the successor to the M20, and predecessor to the M52 engine. The M50 was used solely in the E34 520i and 525i, and the E36 320i and 325i. It is a straight six, or inline-6, coming in at either 2.0L (M50B20) or 2.5L (M50B25).
What engine is in a BMW E36 M3?
The E36 M3 is powered by the BMW S50 straight-six engine. It was the first M3 to use a six-cylinder engine, which has since been used in the majority of M3 models (albeit in turbocharged form since 2014).
Which BMW has the S54 engine?
The S54 is the equivalent high performance engine, used in the E46 M3, the Z3 M Coupé/Roadster and the E85/E86 Z4 M.
How much horsepower does a S54 engine have?
The standard S54B32 engine produced 338 hp at 7,900 rpm and 269 lb-ft of torque at 4,900 rpm. This engine powered the E46 M3, Wiesmann MF 3 Roadster, E85 Z4 M Roadster, and the E86 Z4 M Coupé. In the U.S. and Canada, it was detuned to comply with emission regulations and delivered 333hp and 262lb-ft of torque.
What is the difference between S52 and S54?
YDP-S52 features the “Pure CF Sound Engine.” YDP-S54 features the new “Yamaha CFX sampling Sound Engine” which utilizes a sample from the Yamaha Concert Grand Piano CFX, which provides a richer, more beautiful sound. A variety of settings such as tone settings are easily controlled on your smart device.
Does S50b30 have vanos?
The Euro S50b30 and S50b32 vanos units were found on the ’92-’99 European Spec E36 M3 and Z3. Due to the age and difficulty of finding these units we may not always have these in stock, but you can always send your vanos to us for the rebuild service.
Which stock engine can handle the most HP?
Garrett Aftermarket Turbos Boost Motor to Record-Breaking 5,300 Horsepower on Engine Dyno. See and hear it to believe it. Twin Honeywell Garrett GTX5544R Gen II 106MM turbochargers boost a 670-cubic-inch hemi engine to 5,300 horsepower, making it the world’s highest horsepower recorded on an engine dynamo-meter (dyno).
What stock engine can handle the most power?
- 6/10 Zenvo TSR-S: 1176 Hp V8 Engine.
- 5/10 Koenigsegg Agera RS: 1341 Hp V8 Engine.
- 4/10 Nismo GT-R: 600 Hp V6 Engine.
- 3/10 Audi RS3: 400 Hp 5-Cylinder Engine.
- 2/10 AMG A45S: 416 Hp 4-Cylinder Engine.
- 1/10 Koenigsegg Gemera: 1700 Hp 3-Cylinder Engine.
How much does it cost to boost an E36?
A BMW E36 turbo kit usually costs between $800 and $2,000. Just keep in mind that the final price will be determined by a wide range of variables, such as your location, the repair shop you choose, and the model year of your car. While you’re taking the time to boost your car, why not also boost your car insurance?
What engine is in E46 M3?
The BMW M3 E46 Engine. Outstanding performance is provided by the typical BMW M Series 6-cylinder engine. The 3.2-litre S54B32 engine built on the legacy of its predecessor. Nevertheless, it was an almost entirely new development.
How long do S54 engines last?
The BMW S54 engine is no exception. Expect to replace the S54 water pump every 100,000 miles. Though, failures are not uncommon as early as 60,000 miles. On the other hand, some lucky water pumps may last 120,000+ miles.
How much does it cost to replace a BMW engine?
The M-20 new engine was quoted to us to be $7,500 for the engine and about 25-30 hours of labor, at rates close to $200/hour by BMW would result in over $13,000+ to replace.
What engines can you put in a E36?
- BMW S50 – 3.0 liter six cylinder from E36 M3 (240 hp / 225 lb/ft torque)
- BMW S52 – 3.2 liter six cylinder from E36 M3 (240 hp / 240 lb/ft torque)
- BMW S54 – 3.2 liter six cylinder from E46 M3 (333 hp / 262 lb/ft torque)
How much does it cost to do engine swap?
As a result, expect to spend between $500 and $1,500 in labor costs, in addition to anywhere from $500 for a short block engine to $9,000 for a complete, high-performance engine. Remember that depending on the type of engine chosen, you’ll need to pay for additional parts to complete the block as well.
What is better M50 or M52?
The M50 block is stronger due to it being steel, the M52 is Aluminium and if it overheats a couple of time you’re screwed.
How much horsepower can a M50 engine handle?
Well, the early M50, surprisingly, is actually a pretty tough little engine. In stock form they can withstand roughly 400 horsepower, and with some internal work, over 600 is possible, as is the case with Josh King’s mighty 650hp M50 turbo.
What cars have a S50 engine?
The S50 is the high performance version of the M50 which was used in the E36 M3, replacing the four-cylinder BMW S14 engine used in the E30 M3.