Manufacturers from Aston Martin, Chevrolet, Alfa Romeo, Dodge, Ford and BMW all rely on ZF transmissions to function. You would never think there was anything in common with a Ford F-150 and Rolls Royce – but they both often contain a ZF gearbox.
Table of Contents
Which BMW uses the ZF transmission?
BMW has ditched the dual clutch transmissions as used in previous M3/M4 models and switched to the latest automatic transmission from ZF the 8HP76. For new G80 M3/M4 owners looking to make more power safely without risking damaging the transmission we have your solution.
What cars use the ZF 9 speed transmission?
List of ZF 9HP variants. Acura TLX, Acura MDX, Chrysler 200, Chrysler Pacifica (2017– gas versions only), Fiat Doblò, Fiat 500X, Honda Pilot, Honda Odyssey, Honda Passport, Honda Civic (2018-), Jeep Cherokee (KL), Jeep Renegade, Ram ProMaster City, Range Rover Evoque, Land Rover Discovery Sport, Jaguar E-Pace.
What type of transmission is ZF?
The ZF 9-speed automatic transmission for passenger cars with front-transverse engines. Thanks to the modular principle, different starting elements and all-wheel drive applications can be implemented cost-effectively even given the restricted installation space conditions with front-transverse passenger cars.
Are BMW ZF transmissions reliable?
As said above, the ZF 8-speed is an incredibly reliable transmission. In its nearly ten years of use, internal faults have been scarce, many of which have been user-related. If there is anything to look out for, it’s the occasional fluid leak.
Why is the ZF 8 speed so popular?
Beyond performance, the eight-speed’s appeal is rooted in its versatile modular design. It can accommodate a maximum torque output from as low as 162 pound-feet up to 770. It is compatible with a variety of all- and four-wheel-drive systems, such as an integrated center differential or a two-speed transfer case.
Is the ZF 8 speed a dual clutch?
Dynamic and efficient: ZF’s innovative 8-speed dual clutch transmission forms the basis for a new flexible modular system for front-longitudinal standard, all-wheel and hybrid drives.
How long does a ZF 8 speed last?
If the customer is coming to you, the vehicle is probably over its 100,000-mile warrantee. In most, if not all other vehicles that have the 8 speed ZF transmission, the manufacturer recommends a transmission fluid and filter change at 70,000 to 80,000 miles. This is also the interval that ZF themselves recommend.
When did BMW x5 get 8 speed gearbox?
This was then improved to 245bhp in early 2010, when BMW also introduced an eight-speed automatic gearbox as standard on all diesel models.
Is the ZF 9-speed transmission reliability?
Transmission manufacturer ZF has issued a recall of its nine-speed automatic transmission. This recall affects approximately 505,000 cars, many of which are on U.S. roads. This particular transmission has the unfavorable habit of unexpectedly shifting into neutral during driving.
What is a zf6 transmission?
The ZF S6-650 is a 6-speed manual transmission manufactured by ZF Friedrichshafen AG. It is designed for longitudinal engine applications, and is rated to handle up to 705 newton-metres (520 lbf⋅ft) of torque. General Motors used the S6 as RPO ML6.
Which is better 6 speed or 9-speed transmission?
The 9 speed is way quicker off the line with it’s super short 1st gear. On the highway the older 6 speed has much more jarring RPM jumps when you need some acceleration where the 9 speed is much smoother and doesn’t need high RPM as often to get the job done.
What type of automatic transmission does BMW use?
Steptronic transmission is BMW’s way of calling their torque convertor auto box. The Steptronic transmission carries the same torque convertor mechanism but with use of dual clutches. Similar to the DCT box, one clutch controls the odd numbered gears while the other is responsible for even gears.
Who makes transmissions for BMW?
If you weren’t aware, BMW does not manufacture their transmissions. Instead, General Motors and ZF are the two major suppliers for automatic transmissions for BMW vehicles.
What cars came with ZF transmission?
- 3.1 Alfa Romeo.
- 3.2 Alpina.
- 3.3 Aston Martin.
- 3.4 Audi.
- 3.5 Bentley.
- 3.6 BMW.
- 3.7 Chrysler.
- 3.8 Dodge.
Is the ZF transmission dual clutch?
The dual clutch transmission from ZF enables lightning-fast gear changes under load without interrupting the torque. It is thus ideally suited for vehicles with dynamic/sporty designs. In them, the ZF transmission performs a balancing act between pure sportiness and the highest driving comfort.
What is the difference between 8HP75 and 8HP70?
I would trust your door sticker. The Classic DS model, has the 8HP70, which has a max hp/torque limit lower than the 8HP75 that they started using on the 2019 DT all-new platform. Even those have two versions, one built in-house for Pentastar V6 trucks and one built by ZF for Hemi engined trucks.
When should I change my transmission fluid ZF?
ZF recommends a transmission oil change every eight years or 50,000 miles, and that’s a job you can tackle at home. For this DIY, we are using a service kit for BMWs. Although the kit is for the BMW 8HP45 and 8HP70, you can apply the same basic process to servicing every ZF 8-speed, regardless of the make and model.
When did the ZF 8-speed transmission come out?
First introduced in 2008, ZF’s eight-speed gearbox has come to occupy the transmission tunnels of countless new cars, from big American trucks to compact hatchbacks and ultra-luxurious grand tourers. In some cases, it’s even replaced dual-clutch transmissions.
What is the difference between 850RE and 8HP75 transmission?
FYI, the 850RE is produced by Chrysler/Stellantis with tech licensed from ZF in Germany, and it is used only with the 3.6L Pentastar V6. The 8HP75 is built by ZF themselves in Germany and imported into the US,, and is used behind all Hemi V8 engine applications, including the 5.7L, 6.4L/392, and the 6.2L Hellcat.
What is the strongest automatic transmission?
- The Chrysler TorqueFlite A-727 (better known as just the ‘727’) is to this day one of the strongest automatic transmissions ever built.
- Much of what helped make the Chrysler 727 so strong had to do with its simple design.
What is the difference between 8HP45 and 8HP70?
The 8HP70 is larger than the 8HP45, but not much longer. The tall first gear allows for early lockup of the torque converter clutch. Chrysler will have 40 different “control maps” to change shift patterns based on operating conditions (covering both rear and all wheel drive systems).
What is BMW Steptronic transmission?
The basic functions of the Steptronic transmission include a fully automatic drive mode, a manual/sport drive mode that allows for higher engine revving before shifts, and a manual shift mode that allows the driver to manually shift gears.
Is an 8 speed transmission good?
The highly efficient 8 speed transmission comes with many benefits to the consumer. The first and most sought after benefit is the increase in fuel efficiency. It can improve fuel economy 11% compared the older 6 speed transmission and up to 14% compared to modern 5 speed transmissions.
Where are ZF transmissions made?
ZF opened the Transmission Plant in July 2013 with the production of 8-speed and 9-speed automatic transmissions for the North American Market.