What chassis type is my BMW?


Sharing is Caring


If you don’t know your chassis code, you can easily determine it with the last seven digits of the VIN on RealOEM. This will give you basic information, including chassis code, engine, production date, and production code.

What kind of engine does a BMW 328i have?

The 328i features a turbocharged 2.0-liter four-cylinder engine, with 240 hp and 255 lb-ft of torque. The 328id has a turbocharged 2.0-liter diesel four-cylinder engine, with 180 hp and 280 lb-ft of torque.

Does the 328i have N52?

The N52 engine in the 328i is a naturally aspirated 3.0L inline-6. It uses a lightweight magnesium & aluminum block to help keep weight off the front axle. The head is also aluminum, and features DOHC for a total of 24 valves.

What does chassis mean on BMW?

When a BMW says Chassis Stabilization, basically, it means that the car is detecting that it might swerve out of control. This can be caused by several things, including: A problem with the Anti-lock Brake SystemBrake System (ABS) A problem with the suspension.

What is my chassis code?

The VIN or Chassis Number can be found on the dashboard, driver’s side door and on the registration certificate. All cars and light commercial vehicles built after 1981 have a unique 17-character VIN that provides access to valuable information about that vehicle’s history.

Do I have N51 or N52?

BMW N51 VS N52 The easiest way to know what engine your car is equipped with is to check the emissions label under the hood. The N51 will say “SULEV”, while the N52 will have “ULEV”.

Is the N52 a good engine?

With durability and lightness as the engine’s trump cards, the N52 was an exceptional replacement to its predecessor, the M54. Being light meant better weight distribution, and with the addition of double electronic variable valve timing, these engines could produce upwards of 260 naturally aspirated horsepower.

How do I know if my engine is N52 or N53?

As per the N52, the N53 has double-VANOS (variable valve timing) and a magnesium alloy block. Unlike the N52, the N53 does not have Valvetronic (variable valve lift), due to space limitations in the cylinder head. The bore of 85 mm (3.35 in) and stroke of 88 mm (3.46 in) are the same as the N52.

What year is BMW N52 engine?

The BMW N52 is a naturally aspirated straight-six petrol engine which was produced from 2004-2015. The N52 replaced the BMW M54 and debuted on the E90 3 Series and E63 6 Series. The N52 was the first water-cooled engine to use magnesium/aluminium composite construction in the engine block.

What is the difference between N52 and n52n?

Most significant differences are: New engine management, new HFM (digital), new throttle, plastic valve cover with integrated crank case vent valve and oil separation, stronger connection rods,exhaust valve stem increased, new electric water pump and lightweight camshafts.

What cars have the N52 engine?

The N52 was predominately found in the E90 325i, 328i and 330i, and the E60 525i and 528i models, as well as various others such as the 128i, X1, and Z4 to name a few. The N52 was produced from 2004 up until 2015 when it was replaced by the turbocharged N20 engine.

What cars have N47 engines?

  • E81, E82, E87 and E88 118d.
  • E90 and E91 318d.
  • F20 118d.
  • F30 and F31 318d.
  • 2009-2015 BMW E84 sDrive18d and xDrive18d.
  • 2010โ€“2016 MINI Countryman Cooper SD (R60)
  • 2010โ€“2014 MINI Cooper SD (R56)
  • 2010โ€“2015 MINI Cabrio Cooper SD (R57)

What is e chassis?

In BMW “E” and “F” chassis codes the “E” stands for Entwicklung, the German word for Development. E and F codes are assigned by BMW at the beginning of model development. The “F’ code came after “E” code.

What is my BMW chassis number?

The chassis number can also be found under the bonnet of the vehicle stamped / printed near the top of the suspension mounting. All chassis numbers (bonnet, windscreen and V5c) should be identical.

What type of BMW do I have?

You can find out the model of BMW that you have a few different ways. Here’s where to check. On the back of your vehicle: The manufacturer’s name and vehicle model should be printed on the exterior of your car. Check near the trunk or rear panel.

Where is the engine code on a BMW?

You can find the VIN in the lower corner of your windshield on the driver’s side. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine code. Just tell the store clerk those two characters and you’re in business.

How do I identify my engine?

You can easily find out what kind of engine is in your car by checking the VIN, which can be seen in the owner’s manual or under the hood. The VIN can also be found on the front of the driver’s side dashboard in most cases.

What is engine chassis number?

Vehicle Identification Number, chassis and engine number are unique identification numbers of your vehicle. VIN is an alphanumeric code of 17 characters. Decoding this number will help you identify the manufacturing year and month of a vehicle’s model. Similarly, a chassis number is the last six-digit number of VIN.

How do you read a chassis number?

First Digit: Details of where the car was manufactured. Second and Third Digit: Details of the manufacturer. Fourth to Eighth Digits: Details of the car’s brand, engine type, engine capacity and the fuel type of the car. Ninth Digit: Security code provided by the car manufacturer.

How do you tell if my BMW is a N52?

The easiest way to identify which engine you’re dealing with is to take a gander at the vehicle emissions plate under the hood. You’ll notice the relevant info on the left-hand side of the plate in the third row. N52 will be marked as LEV, while the N51 carries a SULEV tag.

How do I know if my 328i is SULEV?

You can check the above-described label under the hood should you want to confirm. If it says it’s SULEV, then it’s the N51 engine, and if it says LEV, then it’s the N52. There are other ways, too, including looking at your BMW vehicle identification number (VIN).

How do I know if I have an N20 or N26 engine?

Pop the hood and look on the underside of the hood. Right near the center you should see an emissions sticker. If the sticker shows ULEV then you have an N20. On the contrary, SULEV would indicate your BMW is an N26.

Are N20 engines good?

As discussed throughout this article the BMW N20 is an overall reliable engine that does not have many common issues. The timing chain and components may be problematic on models prior to 2015, but has since been resolved with an updated design.

How much HP can a N20 handle?

The Forged BMW N20 & N26 Internals Package includes parts that are capable of withstanding up to 600HP at the crank!. This kit when combined with the right turbo and bolt on parts, will allow you to run up to 600HP at the crank!.

Can you put a turbo on a N52 engine?

So to place a turbocharger on a E9x N52, a custom exhaust manifold/plumbing is required. A low rear exhaust manifold is possible with a ‘small’ turbo. A top mount turbo is ‘easier’. BPC and DigiDon both did this.

Craving More Content?

  • How do you turn off the engine in a BMW?

    Can BMW engines be rebuilt? By maintaining a stock of high-quality BMW core engines, we can provide you the option to either replace or repair your…

  • What does EML light mean on BMW E46?

    The Engine Management Light (EML) or check engine light is a warning indicator which is found on your BMW’s dashboard. It will illuminate when more severe…

  • What is low speed diesel?

    The low speed diesel engines feature four-cycle and two-valve type simple structure keeping low fuel consumption rate and low NOx emission. The engines are mostly provided…

Carolina's BMW