I bought a Carly scanner for it and I have the full package. (Ability to read specific BMW codes). It has a 00578E code which means the transmission fluid is worn out.
Table of Contents
How do you check the transmission fluid on a 2008 BMW 328i?
- Turn the car on. Before checking the transmission fluid, the engine should be warmed up.
- Locate the transmission fluid dipstick.
- Remove the dipstick and touch the fluid.
- Use a rag to wipe off the dipstick.
- Use a funnel to bring the fluid level up to full.
How do you reset the transmission control module on a BMW?
How do I know if my BMW transmission is bad?
- Grinding or Shaking in Gears. The transmission is designed to shift smoothly from gear to gear.
- Slipping Gears.
- No Response When in Gear.
- Strange Noises from the Transmission.
- Burning Odor.
- Low Transmission Fluid.
Does a BMW 328i have a transmission dipstick?
Our research indicates that your vehicle does not have a transmission fluid dipstick. These types of transmissions are designed to be maintenance free. In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car.
How often do you change the transmission fluid on a BMW 328i?
BMW 328i Transmission Fluid If you don’t routinely change your fluids at least every 30,000 miles or so, you may find that your BMW 328i transmission will slip.
How much transmission fluid does a BMW 328i take?
7 Liters of German RAVENOL Synthetic BMW Automatic Transmission Fluid (ATF) – Adequate quantity of fluid for filter change.
What transmission fluid does BMW recommend?
ATF Dexron III is the fluid standard for 4-speed BMW automatics (ZF 4HP). This is also the most common ATF you will find at auto parts stores (it’s compatible with most GM and Ford auto transmissions). BMW 4 and 5-speed automatics are made by either ZF (4HP) or GM (5L40-E/A5S360R).
How much does it cost to change the transmission fluid in a BMW?
The average cost for a BMW 325i transmission fluid change is between $365 and $404. Labor costs are estimated between $148 and $187 while parts are priced at $217. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
Does BMW have a dipstick for transmission fluid?
While it sounds like the transmission cannot be accessed, what this really means is that the transmission does not feature a dipstick. The transmission fluid level can still be checked, but it is best to leave this up to a professional at the Perillo BMW service center.
How do you reset the transmission on a BMW 328i?
How do I reset my BMW DCT transmission?
Throttle reset? Key in ignition, foot OFF the brake pedal (so that the engine does NOT start), press ignition button to power the car (again engine stays off). Floor the gas pedal for a full 30 seconds. Release gas pedal, then press brake pedal and start car like normal.
What does resetting the transmission do?
Resetting a transmission is resetting the transmission’s control unit such that the stored shift pressure and timing values that have been learned over time are reset to default values. This is done using a bidirectional diagnostic scan tool that is capable of resetting the transmission.
What causes BMW transmission malfunction?
What Are The Causes of BMW Transmission Malfunction? The main culprits are the low level of transmission fluid due to leaking, overheating, a clutch failure, or outside factors.
What causes transmission problems in BMW?
In BMWs, the plastic adapter can crack, which causes a fluid leak and reduces pressure output of the mechatronic valve. This results in transmission issues and erratic gear changes. The following BMW models are most susceptible to mechatronic bridge seal adapter failure.
How much does a BMW transmission cost?
You’re right—it will likely be very expensive to replace a BMW transmission. The cost for the service and parts can range from $3,000 to over $7,000.
How do you check transmission fluid without dipstick?
Does BMW need transmission fluid change?
BMW transmission fluid changes are highly extraordinary to keep your vehicle’s transmission amiable and lubricated. If you don’t routinely change your fluids at least every 30,000 miles or so, you may find that your BMW transmission will slip.
How do you fill transmission fluid in a BMW?
The only correct way to do this is to have the car running, the transmission fluid around 100degrees F and make sure the car is level. You can then open the fill hole and use a transfer pump to pump fluid into the transmission until it starts seeping back out of the fill hole.
How can you tell if your transmission fluid is low?
- Noises.
- Burning Smell.
- Transmission Leaks.
- Slipping Gears.
- Slow Gear Engagement.
- Vehicle Accelerates Poorly.
- Check Engine or Transmission Warning Light Is On.
How long are BMW transmissions good for?
With proper maintenance, transmissions can last up to 300,000 miles or more. This includes changing the fluid in your transmission system and regular checkups. However, when you don’t keep up with routine maintenance, your transmission might have problems at the 100,000-mile mark or even sooner.
Do BMW auto gearboxes need servicing?
Almost any independent or gearbox specialist will recommend gearbox oil & oil filter changes inline with ZF (the gearbox manufacturer for BMW) every 60,000 miles. Trust ZF, they have designed and built this transmission. When servicing a gearbox we always check for any leaks and clean down prior to removing filter.
Where is the transmission dipstick on a BMW?
In a rear-wheel drive vehicle, it’s located toward the back, behind the engine oil dipstick. In a front-wheel drive car, the transmission fluid dipstick is sticking out of the transaxle, toward the front.
How many quarts of transmission fluid does a BMW take?
Any decent brand of Dexron VI will work and you will need about 7 quarts of it. You will also need to get a transmission filter and a transmission pan gasket. 1.
How do you check transmission fluid level?
Check the Level With the engine warmed up, leave the car idling in park on a level surface. Pull out the dipstick, wipe it clean, replace it slowly, and then pull it back out. Check the fluid level—how high the fluid comes up on the dipstick—against the “full” and “low” or “fill” marks on the dipstick.