What does the Aux water pump do?


Sharing is Caring


The auxiliary water pump is a consistent flowing device that circulates warm coolant into the heater core – regardless of how fast your engine is running. Because of this fact, if you set a temperature on the thermostat control (if your car has one), it should remain solid.

What does auxiliary water pump do BMW?

The aux pump helps bleeding without starting the car, since the main water pump, is belt driven. It also turns on when driving and when the car is stopped.

When did BMW start using electric water pump?

Electric pumps do have a place on street-driven cars, in fact BMW began using electric water pumps around 2007 and several other manufacturers are working on similar versions.

Why does BMW use electric water pump?

BMW uses electric water pumps in their vehicles, which are actually superior to their traditional counterparts. Electric water pumps run off of your car’s battery and help you maintain your car’s horsepower and fuel economy.

Can a bad auxiliary water pump cause overheating?

A failed pump will almost never cause the vehicle to overheat. If the auxiliary coolant pump is inoperative, the customer might notice reduced heater performance at low speeds and at idle.

Do you need auxiliary water pump?

This is important for passenger comfort, since it allows for sufficient heating even when passengers are driving in traffic or at low RPM. Moreover, an auxiliary water pump can also keep the cabin heated for short periods of time, even after the driver has turned off the ignition.

Is auxiliary water pump the same as water pump?

An auxiliary water pump is different than a single water pump, because it is an electrically controlled motor. Its primary use is circulating water by way of a bypass hose from the main coolant lines to a heater core.

What are the signs of a water pump going out?

  • Coolant Leak. The water pump has several gaskets that can be damaged or worn out over time.
  • Engine Overheating.
  • High Pitched, Harmonic Whining Noises.
  • Water Pump Rust and Corrosion.
  • Steam comes out from under your hood.
  • Holes or leakage system on the dry side of the water pump.

Does BMW have two water pumps?

All the big BMW’s with mechanical main water pumps are fitted with an auxiliary water pump – these are used to provide two functions – they increase the flow of coolant around the cabin heater when the engine is idling, and they also keeps the coolant flowing when the engine is switched OFF so that the cabin can be …

Does my BMW have electric water pump?

BMWs are equipped with an electric water pump, which tends to be more efficient than traditional water pumps; however, it’s important to enlist the help of a BMW specialist to ensure that the correct protocol is followed for BMW’s specific standard of care when your water pump begins failing or requires servicing.

How long do BMW electric water pumps last?

On these water pumps, we suggest replacement at the 80,000 mile interval. Failure usually occurs very soon after the car hits this milage mark.

How do you test a BMW auxiliary water pump?

YouTube video

How do I know if my BMW electric water pump is bad?

  1. Coolant Leaks.
  2. High-pitched Whining Sounds.
  3. Engine Overheating.
  4. Steam Coming From The Radiator.
  5. Higher Mileage.
  6. Routine Maintenance.
  7. Regular Coolant Changes.
  8. Any Change In Your BMW’s Performance.

How do I turn on my electric water pump BMW?

YouTube video

Is there a recall on BMW water pump?

Recall summary Because of the faulty design of the recall cars, the circuit board controlling the pump may overheat and start burning the water pump when working in high temperatures. This could potentially result in an engine fire and also cause the pumps to fail.

How do you test an auxiliary coolant pump?

YouTube video

What does a bad water pump sound like?

If you hear a high-pitched, whining sound that increases as you accelerate – it could indicate a faulty water pump. These sounds are caused by a loose belt and the belt becomes loose when the pulley is loose or the bearings are wearing out.

Does the water pump affect the AC?

The water pump is only one of the many things that might cause your air conditioning to fail. Simply said, if the water pump fails, the air conditioner will not function. If your air conditioner stops working, pay attention to additional symptoms to rule out the water pump as a possible source of the problem.

Will a water pump cause no heat?

There were a lot of situations when drivers often asked me: can a bad water pump cause no heat? The answer to this question is yes, if the part responsible for circulating the coolant around the engine is not working then no heat is an inevitable result.

Does a water pump affect heater?

Yes, a bad water pump can cause no heat. This is because the water pump is what circulates the coolant through the engine and heater core. If it has failed, it is unable to pump the coolant properly, resulting in little to no coolant circulating through the vehicles heater core causing no heat.

How long does a water pump last?

The expected lifespan of a water pump is 60,000 miles to 90,000 miles, but many can last longer than that. Usually, once your car has reached the coveted 100,000 miles, you can plan on the need for a pump replacement soon.

Can you put an electric water pump in a car?

An electric water pump performs a very important job in your car. It helps move the coolant from the radiator to all the necessary parts in the powertrain. By utilizing a controller, it can determine how much coolant circulates through the engine at given temperature ranges and maintain a target temperature.

What is a temperature control water pump?

A temperature-controlled water pump is used in circulating systems without control valves to generate a variable flow, and systems where it is important to have a constant temperature. Applications where a pump with temperature control mode is used include: Single-pipe heating system.

How do you start an electric water pump?

  1. Make sure the power is turned off.
  2. Gain access to the pump system.
  3. Check for damage.
  4. Test a hose.
  5. Open the relief valves.
  6. Attach the hose.
  7. Turn on the water and wait for it to enter the tank.
  8. Turn the power on.

What are 3 ways you can tell if a water pump is bad?

  1. Coolant Leaking. One of the first signs of a potentially faulty water pump is a puddle of coolant on the ground where you’ve parked your car.
  2. Rust or Deposit Build-Up.
  3. Noise.
  4. Overheating.
  5. Steam.

Craving More Content?

Carolina's BMW