“54C6” is “VTG Oil Wear” and as “FAZ” suggests, that is essentially a mileage counter-based code. If you have > 130,000 miles and have NEVER changed Transfer Case oil (. 52 Liter capacity), get a liter of “DTF 1” BMW Transfer Case Fluid, Part# 83222409710.
Table of Contents
How do I reset my BMW transfer case?
The easiest reset is using ISTA. Scan the vehicle and then select “vehicle management” tab then select “service functions” then go to “Power train” then select ” Transfer box/ transmission control” then select “repair.” Click on display and this service function will take you through the transfer case reset.
How much fluid is in a BMW transfer case?
The transfer case has drain and fill plugs for easy servicing and this should be part of your proactive approach to vehicle service. The transfer case will take just under 1 liter of fluid so only one bottle is required.
How much does it cost to replace a BMW transfer case?
The average cost for a BMW X3 transfer case shift motor replacement is between $1,634 and $1,801. Labor costs are estimated between $166 and $209 while parts are priced between $1,468 and $1,592.
What is a transfer case on a BMW?
The transfer case in BMW 4×4 vehicle is what gives the vehicle its namesake capability. The transfer case is responsible for dividing the drive from the engine and sending it to all four wheels, rather than just two.
How often should transfer case fluid be changed BMW?
We recommend performing the transfer box oil change every 60,000 miles.
Should I replace transfer case fluid?
Most mechanics recommend that you replace the transfer case fluid once every 50,000 km. However, the average life of the transfer case fluid depends on how your vehicle is used. If you regularly tow large loads or put other forms of stress on your transfer case, the fluid should be inspected regularly.
What oil goes in a BMW differential?
BMW Differential Fluid BMW calls for their standard 75W-90 differential fluid. We not only have the BMW fluid, but we have LIQUI MOLY 75W-90 gear oil as well which is a great alternative.
How do you diagnose a transfer case problem?
- Shifting Issues.
- Hard to stay in 4WD?
- 4WD Won’t Engage or Disengage.
- Fluid Puddle Under the Transfer Case’s Location.
- Strange Grinding, Growling or Humming Noises.
- Possible Causes of a Bad Transfer Case.
Does transfer case affect transmission?
Can Bad Transfer Case Damage the Transmission? There are instances where a catastrophic transfer case failure can damage other parts of your vehicle, including the transmission. It’s always a good idea to address any known issues with your vehicle as soon as possible to avoid additional problems.
What can cause a transfer case to break?
- Low transfer case oil level. This could result from a fluid leak through the shaft seal located on the transfer case.
- Regular wear and tear. It’s normal for vehicle components to weaken and wear out after continuous use.
- Poor maintenance.
Can a BMW transfer case be repaired?
The transfer case actuator motor is a small motor that is bolted onto the transfer case and can be removed and replaced (or repaired with a new internal gear).
How long do BMW transfer case last?
The transfer case itself apparently wears out after 100k miles or so, especially without oil changes.
How do you turn off the 4×4 on a 2004 BMW X3?
To turn off the 4×4 on a BMW X3, you have two options: Turn on Sport Mode. Sport Mode automatically turns off four-wheel drive and disables your electronic stability control systems. Turn on the Off-Road option.
Is transfer case oil the same as transmission fluid?
Most transfer cases are filled with an automatic transmission fluid, which is usually red in colour. Others use a thicker gear oil, and some use a specialized fluid that is specifically made just for that transfer case.
How much does it cost to replace transfer case fluid?
A mechanic will be able to complete a transfer case fluid replacement, which is used in four-wheel and all-wheel drive vehicles to ensure the axles are cool and turning smoothly. It should be replaced every 30,000 miles and usually costs $75 to $160.
What’s the best fluid for a transfer case?
It’s specifically recommended for use in the following applications: Ford XL-12; GM Auto Trak II; or ATF fluids (Dex/Merc, ATF +4 and others). For the many miles ahead, trust your transfer case with Valvoline, the #1 automatic transmission fluid brand.
What happens if you run out of transfer case fluid?
In an automatic vehicle, the transmission fluid provides a coupling between the engine’s output and the gears in your transmission. If there is no fluid, there is no hold, the gears cannot spin and therefore the car won’t be able to move.
Can I put transmission fluid in my transfer case?
Transfer cases may be filled with gear oil, automatic transmission fluid (ATF), or specialty lubricants. It is important to regularly inspect the transfer case for any damage, leaks, or other concerns.
How do I test my transfer case oil?
Locate the oil fill plug on the transfer case. Remove the top oil fill plug. Using a flashlight, check for oil at the fill plug hole. When full, the oil should be just below the top hole.
How much oil does a BMW differential take?
BMW sells 500ml bottles of fluid, and the differential takes roughly 1-1.2L. The bottles are around $60 a piece, so you’ll need at least two bottles to fill the diff.
Does BMW recommend transmission fluid change?
BMW transmission fluid changes are highly extraordinary to keep your vehicle’s transmission amiable and lubricated. If you don’t routinely change your fluids at least every 30,000 miles or so, you may find that your BMW transmission will slip.
What is differential gear oil?
Differential oil is sometimes referred to as gear oil and is found in the axle housing. It’s designed to perform under high-pressure situations, rather than high temperatures like engine oil. Differential fluid: Lubricates clutch packs, gears and bearings.
What are the symptoms for a bad transfer case on a BMW?
- Fluid Leaks. All cars including BMWs utilize various fluids that perform different functions for the engine and other systems, such as brake and coolant fluids.
- Odd or unusual noises coming from the engine.
- Gear-shifting troubles.
How do I know if my transfer case chain is bad?
- Grinding noise while shifting gears.
- Difficulty staying in 4WD.
- 4WD not engaging or disengaging.
- Grinding, growling, or humming noises that change with vehicle speed.
- Illumination of the 4WD warning light in the dash.