The front passenger seat occupancy (OC3) mat for SRS component-specific limited warranty extension to 15 years/unlimited miles applies to “eligible US-specification BMW vehicles” that are registered, operated and have their covered repair performed by an authorized BMW center in the United States (including Puerto Rico …
Where is the seat occupancy sensor located?
The seat occupancy sensor is placed above the seat foam and under the seat cover. When the sensor connector is connected to the vehicle data recorder it sounds an alarm that occupants are seated but not belted in.
How much does it cost to replace a passenger seat sensor?
The average cost for air bag occupant sensor replacement is between $485 and $510. Labor costs are estimated between $96 and $121 while parts are priced at $389. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
What is BMW code 93C3?
BMW Code 93C3 occupancy seat detector mat sensor.
What is the purpose of the seat sensor?
A vehicle’s passenger occupancy sensor detects whether a passenger is in the seat and decides whether or not to allow the airbag to deploy in the event of an accident. If the sensor determines a weight on the seat is not a person, the airbag does not deploy.
What is seat occupancy sensor?
General Description. The Seat Occupancy sensor is a magnetically operated push button sensor with a simple push-fit clip mounting configuration, allowing the passenger safety system to determine the presence of an object or person in a seat.
Do crash sensors need to be replaced?
Any crash sensor which may have sustained any type of damage, as a result of an accident, should be replaced. Having the airbags deployed during an accident will obviously mean the airbags need to be replaced. This will, also indicate that airbag control module will need to be replaced and/or reprogrammed.
How much does it cost to turn off the airbag light?
Number 1 — Reset Airbag Light You’ll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
Where is the passenger airbag sensor located?
How do you turn off the passenger airbag in a BMW 3 Series?
How do you reset the passenger airbag light on a BMW?
Turn on your car and make sure that the airbag light is on. Wait for seven seconds, then turn your car back off. Repeat this process two more times. Your airbag light should turn off.
What does passenger restraint system mean?
Related Definitions Passenger restraint system means the seat belt assembly required to be in the motor vehicle under the federal motor vehicle safety standards issued pursuant to the federal National Traffic and Motor Vehicle Safety Act of 1966, as amended [15 U.S.C.
Can a seat sensor cause the airbag light to come on?
It may be an issue with your seat belt sensor. Sometimes the sensor that detects whether you have fastened your seat belts can become faulty. When this happens, it can trigger the airbag light to come on.
How does my car know theres a passenger?
There are two sensors that are used to determine if there is a passenger currently seated and buckled in. One sensor is in the seat itself — to sense when there is adequate pressure on the seat. The other sensor is in the seat belt buckle — to determine whether or not the passenger is wearing their seat belt.
How much do you have to weigh for the airbag to be on?
8. Weight sensors in the front passenger’s seat. The front passenger’s airbag will be turned off if the weight on the seat is approximately 65 lbs (29 kg) or less (the weight of an infant or small child).
What is difference between motion sensor and occupancy sensor?
A motion sensor will allow you to determine when there is motion in an office, but it won’t tell you who caused that motion, where they’ve been or where they go next. Occupancy sensors can track multiple desks at once, so you can track desk usage throughout the entire office.
What are the three 3 types occupant detection system sensors?
Detection technologies cover a wide range of options to detect the presence, the most common being inductive sensors, photoelectric sensors, capacitive sensors and ultrasonic sensors.
How do I get the SRS light off?
- Turn your ignition on and off.
- Restart your vehicle and do a test drive.
- Examine the passenger airbag switch.
- Inspect whether seat belts are fastened or working correctly.
- Verify that the passenger seat sensor is not applied.
- Use a scanner with an SRS or airbag light reset option.
How much is a crash sensor?
The average cost for air bag crash sensor replacement is between $367 and $384. Labor costs are estimated between $64 and $81 while parts are priced at $303. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.
Are crash sensors reusable?
It all depends on the severity of the accident. However, in most cases, the front impact sensors are reusable unless they have been physically damaged or the wire leading to it has been crimped by metal.
How much does it cost to replace a airbag sensor?
The average airbag sensor replacement cost is between $100 and $600, depending on the car model and labor costs. An airbag sensor costs $50 to $300 and a labor cost of $50 to $300.
Why is my BMW airbag light on?
What does it mean: The airbag system, or supplemental restraint system (SRS) light illuminates when a problem is detected by your BMW’s computers within the airbag control unit. An illuminated SRS warning light means that the system has been disabled and the airbags will not deploy in the event of impact.
Can a mechanic fix airbag light?
Of course, an expert auto mechanic can fix your car’s airbag light problem. Auto mechanics are trained to rectify vehicle problems by inspecting the component and diagnosing the hidden cause of the problem before delving into the repair properly.
Can you drive a car with airbag light on?
While it’s not necessarily imminently dangerous to drive with your airbag light on, there could be a large problem if your airbags don’t deploy when you need them the most. If you want to rely on your vehicle as a safe thing to drive, address the issue when the airbag light comes on.
Will disconnecting the battery reset airbag light?
If you have a vehicle with an airbag light on, you should have the problem checked by a mechanic as soon as possible. You can try disconnecting the battery, but this method will not fix the underlying problem. A mechanic can find out what is causing the malfunction, and do the repairs right.