The RDC Module is responsible for monitoring the pressures in each tire. If a tire pressure falls below the threshold it communicates it to the vehicle and turns a warning light on. It is common part we’ve seen that’s prone to failure. The module can draw in moisture causing corrosion.
Table of Contents
Where is the RDC on a BMW?
It normally inside the fender for the fronts and under the trunk panel or inside the fender for the rears on the receiver. But the module itself, it is either in the right side trunk or passenger side kick panel.
What is an RDC sensor?
What is Tire pressure Monitor System (RDC)? Tire pressure monitoring system known as RDC is based upon pressure sensors in each wheel and responsible for controlling whole tyre pressystem in car.
How does BMW RDC work?
Radio sensors on the wheels supply the required data. Furthermore, RDC also has an active warning function. As soon as a relevant deviation from the specified values is detected, a yellow info light or a red warning light automatically indicates the loss in pressure.
Does a TPMS module need to be programmed?
Programming a sensor is an essential step when working with universal or “programmable” TPMS sensors. These sensors come completely blank out of the box and they need to be programmed (also referred to as “activated”) to the unique make, model and year of the vehicle being serviced.
How do you reset the tire pressure sensor on a BMW?
From the home menu click car, vehicle status, tire pressure monitor, and tire settings. With the car stopped, and the engine running select perform reset. You will need to go on a short drive for the reset to be completed.
What does TPM malfunction mean on a BMW?
If the warning comes up, then check the tire pressure. If your tires have started to lose pressure, then you have a puncture in the tire. There is nothing wrong with the vehicle’s TPM. Go into a garage and get your vehicle’s tires replaced or repaired.
Why is my tire pressure light still on after filling tires BMW?
If you’ve added air but the air pressure warning light stays on, there’s a problem with your Tire Pressure Monitoring System or you have a slow leak. Assuming there is no leak in your tire, a lit TPMS warning light indicates a problem with a tire pressure sensor.
How accurate is BMW TYRE pressure monitor?
Typically see TPMS measures it lower by 0.5 ~ 1 PSI. This might seem like a silly question, have you tried to manually set the air pressure, then reset the TPMS sensor on the iDrive screen and see if that shakes out. Yes…
How does BMW TYRE pressure monitor work?
It works by tracking the tyres as they revolve. A tyre that is underinflated will have a smaller radius than a tyre that’s properly inflated, and therefore it will make more or irregular turns. This is how the sensor detects that the pressure could be low.
What should my BMW tyre pressure be?
The recommended BMW tire pressure for most models is 32 PSI (pounds per square inch), though you should always double-check by looking at the sticker on the inside edge of the driver’s door.
Do BMW TPMS need to be programmed?
Programmable or Configurable (Aftermarket) Programmable or configurable sensors are aftermarket universal TPMS sensors. The sensor must be programmed or cloned from an OEM or another aftermarket sensor before use, using a TPMS tool.
How long does it take to reset TPM BMW?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and let it run for 20 minutes, which allows the sensors to reset. You’ll find the tire pressure monitor reset button located beneath the steering wheel.
Can I put regular air in my BMW tires?
Don’t do it! You can’t mix air with nitrogen. That’s really bad. Nitrogen and Oxygen, combined with a fuel source and an ignition souce can combust.
How do I know if my TPMS module is bad?
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
Can I program TPMS myself?
Yes, you can! All you need are the specialized tools and loads of relevant information on how to go about programming your vehicle’s TPMS.
Can you relearn TPMS without tool?
With the exception of some Chrysler and Mazda models that may be relearned to the vehicle via a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure.
How do you reset the tire pressure light on a 2006 BMW?

How much does it cost to replace a TPMS sensor on a BMW?
On average, the cost for a BMW 328i Tire Pressure Sensor Replacement is $210 with $115 for parts and $95 for labor.
Where is the TPMS reset button?
The TPMS reset button is usually located beneath the steering wheel. If you are unable to find it, refer to your vehicle’s owner’s manual. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to include the spare tire, as it may have a sensor as well.
How much does it cost to fix TPM malfunction BMW?
The Best in Auto Repair The average cost for a BMW 328i tire pressure monitor control module replacement is between $597 and $661. Labor costs are estimated between $245 and $309 while parts are priced at $352.
How do I know if my TPMS sensor is bad on my BMW?
The sign that should cause you to worry about your TPMS sensors is when the light blinks rapidly and does not stay solid or go away. This indicates that one or more sensors are bad, or that the system itself is malfunctioning in some way.
How much does it cost to replace the tire pressure sensor?
On average, you will have to spend between $30 to $75 for a sensor and around $10 to $35 in labor costs. Thus, the average cost of replacing a tire sensor can cost between $40 and $100.
Why won’t the tire pressure light go off?
If you’ve inflated your tires to the proper air pressure, but the warning light stays on, you may have a leak or there’s a problem with the TPMS in one or more of your tires. It’s simple enough to check if there’s a leak in a tire. Just use your tire gauge to recheck the air pressure in all your tires.
Why is my tire pressure light on if all my tires are full?
If the light comes on and all your tires are within the acceptable range, there’s a chance that you have a malfunctioning tire-pressure monitoring sensor that needs to be replaced.