The thread size or thread diameter is the measurement taken across the outside diameter of your wheel stud threads measured in either standard (7/16″, 1/2″, etc.) or metric (12mm, 14mm, etc.) dimensions. The most common thread sizes are 10mm, 12mm, 14mm, 7/16″, 1/2″, 9/16″, 5/8″.
Table of Contents
What size thread are BMW wheel bolts?
Wheel Bolt specs: Diameter – 14mm. Thread Pitch – 1.25mm. Length – 27mm.
Are all BMW lug bolts the same?
The originally equipped 2022 BMW i4 lug bolts are the same, but aftermarket ones are various in styles, seat types, materials, and even length. Many customers who intend to change wheels usually end up replacing the OE lug bolts with aftermarket 2022 BWM i4 lug bolts.
What size are e92 lug nuts?
17mm lug nut to fit 12×1. 5 thread wheel studs (common for most BMWs made before 2012). This is a super tough wheel stud nut in a standard 17mm size.
Are BMW bolts metric or standard?
All bolts have torque values and some bolts are single use (torque + angle = stretched permanently). There is no such thing as good n’ tight : 1/4″, 3/8″, 1/2″ metric torque wrenches – Make sure it has a metric scale, BMW service documentation is always metric.
Why does BMW use lug bolts?
It is most likely because of tradition… it’s always been that way and so they’ve stuck to it. Really prefer studs and nuts though. Much easier to take wheels on and off. If you buy 2 wheel pins, it’s really not so bad.
Are all BMWs 5×120?
It’s worth bearing in mind that although the 5×120 PCD is shared among all modern 3 Series models, depending on the exact model it may require differently-sized wheel bolts.
Are BMW bolts metric or imperial?
All bolts have torque values and some bolts are single use (torque + angle = stretched permanently). There is no such thing as good n’ tight : 1/4″, 3/8″, 1/2″ metric torque wrenches – Make sure it has a metric scale, BMW service documentation is always metric.
Which BMW uses 5×112?
BMW 1 Series [2017-2022] – Bolt pattern 5×112.
Are all lug nuts the same thread?
While lug nuts vary in size and thread pitch, one of the most important differences in lug nut type is in the contact point where the lug nut meets the wheel, AKA the lug nut seat. It’s crucial that the lug nut seat and the wheel lug seat match.
How do I know my lug nut size?
You can easily identify your thread size and pitch with a simple thread pitch gauge available at any hardware store, or you can simply take one of your lug nuts to your local hardware store and spin it onto the bolts they have on hand.
What thread pitch is?
The thread pitch is the distance between corresponding points on adjacent threads. Measurements must be taken parallel to the thread axis. โข The major diameter or outside diameter is the diameter over the crests of the thread, measured at right angles to the thread axis. โข
What size are BMW e90 wheel nuts?
17mm 17mm lug nut to fit 12×1. 5 thread wheel studs (common for most BMWs made before 2012). This is a super tough wheel stud nut in a standard 17mm size.
What size are e90 wheel bolts?
These are 12 x 1.5mm bolts with a 17mm head — as used on most BMWs.
What stud pattern is 5×112?
The 5×112 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (112), the notional circle determined by the center position of the studs.
What Torx does BMW use?
- BMW Genuine Torx Screw – M6X16.
- It is used in Air duct — – Intake muffler/Filter cartridge/HFM —
- Manufacturer Warranty: 24000 miles or 2 years.
- Please see Product Description below for vehicle compatibility.
What sockets do I need to work on a BMW?
3/8″ Drive External Torx Socket Set. BMW engines use the E-torx hardware throughout the engine, this is a must have for anyone doing engine work on their BMW.
How tight should BMW lug nuts be?
Once you remove the lug bolts and torque them again, 88ft. lbs. is the recommended BMW Torque setting.
Should I Loctite my lug nuts?
No. Do not use Loctite (or any sort of thread lock compound) on wheel studs. Using thread lock compound will make it very difficult to remove the lugnuts in the event of a roadside emergency tire change.
Does BMW use aluminum bolts?

Can you put 5×120 on 5×112?
These 5×120 to 5×112 PCD adapters are designed to change your PCD from 5×120 to 5×112 , and simply fit on to your vehicle’s existing wheel hub. These PCD hub adapters are 45mm in thickness, feature an M14x1. 5 thread type and will convert your vehicle’s centre bore from 72.5mm to 57.1mm.
Can you convert 5×120 to 5×112?
The wheel adapter set is used to convert 5 lug 120mm hub bolt pattern to fit 5 lug 112mm bolt pattern wheels.
What size lugs are BMW?
Most BMWs have a lug pattern of 5×4. 41 or 5×4. 72, but you need to know the specific measurement to switch rims or replace the wheels. BMWs are known for delivering a sporty driving experience and high-tech interiors.
Do Japanese cars use metric bolts?
A: Japanese cars use METRIC.
Is M8 a metric bolt?
Metric nuts and bolts are commonly referenced using ‘M’ sizes, for example: M3, M8, M12. But the size of a metric fastener is more accurately specified using diameter, pitch and length dimensions, in millimeters.