Aluminum wheels should have the lug nuts torqued to 70 ft. lbs. The beadlocks should be 20-22 ft. lbs.
What torque should a lug nut be?
The general rule for steel wheel lug nut torque is usually around 80ft/lb, and for aluminum wheels it is around 100ft/lb, this being said you still need to check on the manufacturer’s specifications. Drive safe and secure, get your wheels checked.
What should I torque my BMW wheels to?
For as long as I can remember, BMW’s recommended lug torque setting has been 120 Nm (88.5 lbs-ft). Not sure when BMW changed this value, but I’m glad I noticed it. Heads up for anyone who’s had past BMWs like me and assumed 120 Nm was still correct. So is this just for the M2C?
What size are BMW lug nuts?
17mm 14×1. This is a super tough wheel stud nut in a standard 17mm size. The zinc finish is durable and bright so your eye catches it quick (important during fast pitstop tire changes). 17mm is the standard BMW bolt head size so you won’t have to buy extra sockets.
Is it bad to over torque lug nuts?
Excessively tightened lug nuts can strip the threads, distort brake rotors, damage the wheel, and possibly shear off the lug stud. Insufficiently tightened lug nuts can come loose, with catastrophic consequences.
How many ft-lbs should lug nuts be?
Lug nuts should be torqued to 100 ft/lbs.
How tight should I tighten my lug nuts?
Run the lug nuts in with your favorite tool until snug, but no more. Tighten the lug nuts in a star pattern twice, smoothly applying force until the wrench clicks, but no further.
Why is the r1200gs so popular?
Thanks to its unique combination of road, touring and off-road capability – crucially without compromising on everyday use – the R 80 G/S was introduced to the press and within a year it was a huge success, and this model alone accounted for 20% of total BMW motorcycle sales.
Why is BMW GS so popular?
A Timeless Engine The famous air/oil-cooled flat twin-cylinder engine pumps out 136 horsepower and an impressive 105 ft/lbs of torque. What makes it even better is the broad spread of power, thanks to BMW’s ShiftCam variable valve timing.
What is the fuel consumption of a BMW r1200gs?
As per ARAI, the average of R1200 GS Adventure is 16 kmpl. With a fuel tank capacity of 33 litres, this bike can go upto 432 kms on full tank.
Do aluminum wheels need to be Retorqued?
All disc wheel suppliers to the North American market, including manufacturers of steel and aluminum wheels, recommend retorquing wheels after a run-in period.
Do you have to re torque aluminum wheels?
It’s even more important with aluminum rims, he added, which are softer than steel, as the lug nuts can loosen more easily, meaning a higher chance of a problem. Some people do take re-torquing very seriously, according to Isaas Sarsour, owner of Moncton’s T & L Auto Service.
How do you tighten aluminum lug nuts?
How do I find the torque specs for my car?
Where To Find The Correct Manufacturer Recommended Torque Specs. The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can’t find that information, or if you don’t have a guide, you can find the specs in the service manual.
What is the torque spec for steel wheels?
For 1/2-inch wheel studs and a 14-inch steel trailer wheel you will use a torque range of 75-to-85-ft-lbs.
How do you set a torque wrench?
Are all BMW lug bolts the same?
BMW Bolt Patterns & Center Bore: Nearly all BMWs have 5 lug bolts in a 120mm bolt circle. Beginning with the G01 7-series chassis in 2009, all G-chassis use a 5×112 bolt pattern – the same number of lug bolts but in a 8mm tighter circle.
Why does BMW use lug bolts?
It is most likely because of tradition… it’s always been that way and so they’ve stuck to it. Really prefer studs and nuts though. Much easier to take wheels on and off. If you buy 2 wheel pins, it’s really not so bad.
What size socket fits a BMW lug nut?
You need a metric (17mm) wrench/socket.
Can you overtighten lug nuts by hand?
Can you over-tighten your lug nuts by hand? Sure you can. If it’s not just your car that’s jacked up. If you have the necessary muscle, you could tighten the nuts more than the specifications call for.
How often should lug nuts be Retorqued?
Lug nuts must be torqued to the manufacturer’s recommended values, and they must be re-torqued to those values after driving approximately 50 to 100 miles on your new tires after the tire service.
How much torque is too much torque?
Most 2WD road cars – even with large grippy tires – can’t handle more than 400-500 lb/ft of torque. AWD cars can handle as much as 600 lb/ft without losing traction.
Do you need torque wrench for lug nuts?
That’s why most owner’s manuals have a torque specification for lug nuts. If you plan to do any major work on your engine or on some major powertrain components, you absolutely need a torque wrench. Overtightening cylinder-head bolts, for instance, can easily cause expensive damage and catastrophic coolant loss.
What is the torque for 1/2 lug nuts?
For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs.
Do tires really need to be Retorqued?
Whenever you have new wheels and tires fitted to your car – for example, you’ve done the sensible thing and switched between summer and winter tires – we recommend to have the lug nuts retorqued after the first couple of kilometers. Why should a responsible driver do this? The point is road safety.