What kind of oil does a 2009 BMW x5 use?

Spread the love

Recommended Oil for BMW X5 As we mentioned earlier, the proper oil you’ll want in your BMW is 0W-30 or 5W-30 synthetic oil.

How much oil does a 2009 BMW x5 take?

Engine Oil Capacity: With filter 6.9 quarts. If oil cooler is drained add 0.5L (0.5 quart).

Where do you put the oil in on a 2009 BMW x5?

What is BMW recommended engine oil?

BMW Longlife-01 Oil Spec This formulation is a fully synthetic long-life motor oil and can also be used where a BMW Longlife-98 oil is recommended. This formula is always a fully synthetic engine oil with a variety of viscosity options such as SAE 0W-30, 0W-40, 5W-30, and 5W-40.

What kind of oil goes into a 2008 BMW X5?

Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)

What type of oil does a 2008 BMW X5 take?

Valvoline SynPower Synthetic Motor Oil 5W-40 1 Quart.

How much oil does BMW X5 need for oil change?

Most N55-equipped BMWs, including the F15 and F16 X5 and X6 take 6.9 quarts of oil. That is equivalent to 6.5 liters of oil.

How much oil does a BMW X5 E70 take?

7 liters 5W-30 BMW X5 motor oil, oil filter, and hardware for 3.0L 24V, including E70 or F15 applications.

Why does my BMW say add 1 quart of oil?

This can happen when your oil starts to get contaminated at higher milages and also, believe it or not, when you just start the car and then stop on an incline! Whatever you do though, DO NOT KEEP ADDING OIL. Run the car on level ground for 20 minutes and the sensor will re-set.

What kind of oil does a 2007 BMW x5 take?

Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)

How do I top up my BMW x5 oil?

Pop your BMW vehicle’s hood, and locate the oil filler cap. Unscrew the cap, but be careful! If you haven’t waited long enough, it may be hot to the touch. Add more oil using a funnel.

Can I use any 5w-30 oil in my BMW?

The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines. It’s the only oil approved in the US for BMW’s turbo N20 N54 N55 engines, including the S55 engine in the 2015+ F80 M3/F82 M4. It can also be used in most MINI engines.

Should I use 5w-30 or 5w40?

5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures. 5w40 is often used in higher mileage engine sand performs better in warmer temperatures.

Is Mobil 5w-30 Good for BMW?

Mobil 5w-30 is thinner on the 30 weight range and not thick enough for BMW’s spec. Just use the proper 0w-40 Mobil to be safe.

What oil does BMW x5 e70 take?

BMW 5W-30 Twinpower Turbo Longlife Synthetic Oil.

How much oil does a 2008 BMW x5 take?

Engine Oil Capacity: With filter 6.9 quarts.

How much oil does a 2007 BMW x5 take?

Engine Oil 8.5 quarts (with filter).

What oil does a 2007 BMW x5 4.8 I take?

8 Liters Of Full Synthetic German RAVENOL HCL 5w30 Motor Oil – Approved BMW Longlife-01 oil specification for the BMW 4.8L V8 engines.

How do you check the oil on a 2008 BMW x5?

How do you change the oil on a 2008 BMW x5?

How do you reset the oil light on a 2009 BMW X5?

Are BMW oil changes more expensive?

It will usually cost between $135 and $175 to get a BMW oil change compared to an oil change for a more affordable car will cost between $35 and $75. Prices vary because of three factors: type of oil, parts, and labor. BMWs use special synthetic oil, which performs better at low temperatures.

How many Litres does a BMW X5 take?

The fuel tank capacity of BMW X5 is 80 Liters.

How often does BMW X5 need oil change?

According to the experts, you should have your oil changed on your BMW X5 every 5,000 to 7,000 miles. However, that number can change a bit based on your specific situation (including your trim level, your driving habits, and your vehicle’s maintenance history).

Can you change the oil on a BMW yourself?

The DIY – Do It Yourself – option for oil change is a great project for the BMW owner. If you have access to the tools. Fortunately, they are not hard to perform once you get the oil filter cap wrench which runs about $20, if you cannot borrow one from a friend. The tools frequently pay for themselves after a few uses.

Do NOT follow this link or you will be banned from the site!