Valvoline SynPower Synthetic Motor Oil 5W-40 1 Quart.
What oil does BMW X5 recommend?
Recommended Oil for BMW X5 As we mentioned earlier, the proper oil you’ll want in your BMW is 0W-30 or 5W-30 synthetic oil.
How many quarts of oil does a 2003 BMW X5 take?
Capacity: 7.9 quarts (with filter). After refill check oil level.
What kind of oil do you put in a 2003 BMW?
Be sure to use the correct oil. BMW recommends Castrol TWS 10W-60, which you can purchase online or at your BMW dealer.
How many quarts of oil does a 2004 BMW x5 take?
Engine Oil Capacity: With filter 7.9 quarts. After refill check oil level.
Can I use any 5W-30 oil in my BMW?
The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines. It’s the only oil approved in the US for BMW’s turbo N20 N54 N55 engines, including the S55 engine in the 2015+ F80 M3/F82 M4. It can also be used in most MINI engines.
Can I put 5w40 in my BMW?
BMW says you can use an: 0w40, 0w30, 5w30 or a 5w40 LL-1 oil in the USA.
Which engine oil is best for BMW?
Most BMW engine comes with a 5W-30 from the factory. BMW also recommends an oil change interval of 15,000 miles. The brands that BMW uses are the Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30 or Castrol Syntec European Formula SAE 0W-30.
How much oil does a BMW X5 3.0 d take?
You need 7.5 liters of engine oil to change the oil in BMW X5 (E53) 3.0 d Diesel 218.
What type of oil does a 2001 BMW X5 take?
Castrol Edge Synthetic Motor Oil 0W-30 1 Quart.
How much oil does X5 E53 take?
The engine oil capacity is (6-cylinder): 6.5 liters (7 US quarts).
What kind of oil goes in a 2003 BMW 325i?
Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)
Where is the oil dipstick on a 2004 BMW?
What kind of coolant does a 2003 BMW 325i take?
Peak 1 Gallon Yellow 50/50 Antifreeze; Coolant.
What type of oil does my 2004 BMW X5 take?
Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)
How many quarts of oil does a 2005 BMW X5 3.0 liter take?
Capacity: 7.9 quarts (with filter). After refill check oil level.
Can I put Mobil 1 5W-30 in my BMW?
Mobil 5w-30 is thinner on the 30 weight range and not thick enough for BMW’s spec. Just use the proper 0w-40 Mobil to be safe.
Should I use 5W-30 or 5w40?
5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures. 5w40 is often used in higher mileage engine sand performs better in warmer temperatures.
Do I have to use BMW oil in my BMW?
With motor oil being the most important fluid next to gasoline in your BMW vehicle, it’s important that you don’t scrimp on the quality or type of motor oil you put in your BMW. That’s why BMW recommends the exclusive use of synthetic motor oils inside all BMW engines.
What happens if I put 5w40 instead of 5W-30?
In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
Is 5w40 thicker than 5W-30?
Although both have the same viscosity grade in cold weather, 5W-40 is thicker than 5W-30 at warmer temperatures. It’s also worth pointing out that: 5W-40 is the suggested oil for most diesel applications. Rarely (if ever) do vehicle manufacturers recommend putting 5W-40 oil in a gas-powered engine.
Is 10w 40 oil good for BMW?
So for summary, 10w 40 is still okay but it is better to use a Synthetic 0W-30 or 5W-30.
Is Castrol Edge 5W-30 good for BMW?
EDGE 5W-30 is also approved for use in modern BMW and Mercedes gasoline and diesel engines including those equiped with a DPF that require BMW Longlife -04 or MB-Approval 229.51 specifications. Castrol EDGE 5W-30 is engineered to; – Pass the toughest VW motor oil tests to protect all parts of your engine.
Is Castrol good oil for BMW?
With that said, both Castrol and Shell offer quality high-performance lubricants. Shell has a line of fully synthetic oils that is perfectly capable of meeting the needs of older generation BMW engines. So even if you can’t find the Genuine stuff anymore, you’re far from being out of options.
Is 0W 20 oil good for BMW?
The BMW LL-17FE+ motor oil standard is a low-SAPS (sulfated ash, phosphorus, and sulfur) formula in the 0W-20 viscosity range. It is suitable for BMW gasoline, hybrid and diesel engines.