What oil does my 2008 BMW 535i take?

Spread the love

Valvoline SynPower Synthetic Motor Oil 5W-40 1 Quart.

How many quarts of transmission fluid does a BMW take?

Any decent brand of Dexron VI will work and you will need about 7 quarts of it. You will also need to get a transmission filter and a transmission pan gasket. 1.

How much transmission fluid do I need BMW?

A ZF 6-speed automatic transmission in a BMW has a filter that is part of the plastic oil pan so basically you are replacing the oil pan. To do this job you will need to order a transmission pan, 7 liters of proper fluid and a fluid hand pump. 1. Make sure the car is perfectly level on the jack stands.

How do you check the transmission fluid in a 2008 BMW 535i?

Our research indicates that your vehicle does not have a transmission fluid dipstick. These types of transmissions are designed to be maintenance free. In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car.

How many quarts of oil does a 2008 BMW 535i take?

Engine Oil Capacity: 6.9 quarts (with filter). After refill check oil level.

How much transmission fluid does a 2008 BMW 335i take?

7 Liters German RAVENOL Synthetic BMW Automatic Transmission Fluid (ATF) – Adequate quantity of fluid for filter change.

How much is a BMW transmission fluid change?

The average cost for a BMW 325i transmission fluid change is between $365 and $404. Labor costs are estimated between $148 and $187 while parts are priced at $217. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How much transmission fluid does a 2008 BMW 328i take?

7 Liters of German RAVENOL Synthetic BMW Automatic Transmission Fluid (ATF) – Adequate quantity of fluid for filter change.

What ATF to use in BMW?

The recommended ATF for either is Dexron III (D4). This is also the most common ATF you will find at auto parts stores (it’s compatible with most GM and Ford auto transmissions). BMW has transitioned to a newer Dexron VI spec, which is backwards compatible with Dexron III.

How much transmission fluid does a BMW 525i take?

A BMW 525i transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.

How do I know if my BMW is low on transmission fluid?

  1. Drips or puddles underneath the car.
  2. Difficulty shifting through gears and/or slipping.
  3. Shuddering or shaking.
  4. Lurching or sudden jerks.
  5. Transmission won’t engage.
  6. Humming or clunking noises.
  7. A burning smell.

How do you check the transmission fluid on a BMW 535i?

  1. Turn the car on. Before checking the transmission fluid, the engine should be warmed up.
  2. Locate the transmission fluid dipstick.
  3. Remove the dipstick and touch the fluid.
  4. Use a rag to wipe off the dipstick.
  5. Use a funnel to bring the fluid level up to full.

How do I know if my BMW needs transmission fluid?

  1. Rough Idling and Odors.
  2. Slipping Transmission.
  3. Leaking Fluid.
  4. Poor Shifting and Accelerating.
  5. Check Engine Light is On.
  6. What Should You Do About These Signs?

What oil should I use in a 2008 BMW 535i?

Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)

How many liters of oil does a BMW 535i take?

7 liters 5W-30 BMW 535i motor oil, oil filter, and hardware for 3.0L 24V applications. Oil carries OEM approval for BMW Longlife-01 oil standard.

How do you fill a BMW transmission fluid?

  1. Turn the engine on for a few minutes before you check the level.
  2. Locate the transmission fluid dipstick.
  3. Remove the dipstick and touch the fluid.
  4. Use a rag to wipe off the dipstick.
  5. Use a funnel to properly fill the vehicle, taking care to avoid overfilling it.

How many quarts does a n54 take?

Engine Oil Capacity: 6.9 quarts (with filter).

Does BMW have a dipstick for transmission fluid?

Before getting out to pop the hood, double-check that your car is in park. Locate the transmission fluid dipstick. This is typically located to the right of the oil dipstick on front-wheel drive vehicles.

How many quarts of transmission fluid do I need?

A typical fluid change will require anywhere from 3 to 6 quarts of ATF depending on the application, a new filter and a pan gasket (or RTV sealer) for the transmission pan. The pan must be thoroughly cleaned prior to reinstallation.

How many gallons of transmission fluid do I need?

On average, passenger vehicles take between 4 and 17 US quarts (3.8 to 16 liters) of transmission fluid to fill. Green cars and manual-transmission automobiles require the least transmission fluid, while pickup trucks and luxury cars need the most. Regardless of vehicle type, avoid overfilling the transmission.

Does BMW have lifetime transmission fluid?

ZF 6HP & 8HP Automatic Transmissions 100,000 miles is BMW’s definition of what a “lifetime fill” and that’s passed the extended warranty and “good-will” repair limit, meaning a failure after that is no longer BMW’s responsibility.

Does BMW recommend transmission fluid change?

BMW transmission fluid changes are highly extraordinary to keep your vehicle’s transmission amiable and lubricated. If you don’t routinely change your fluids at least every 30,000 miles or so, you may find that your BMW transmission will slip.

How many quarts does a BMW 328i 2008?

Capacity: 6.9 quarts (with filter). After refill check oil level.

How many quarts of transmission fluid does a BMW 328i take?

A BMW 328i transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.

How long does a BMW automatic transmission last?

With proper maintenance, transmissions can last up to 300,000 miles or more. This includes changing the fluid in your transmission system and regular checkups. However, when you don’t keep up with routine maintenance, your transmission might have problems at the 100,000-mile mark or even sooner.

Do NOT follow this link or you will be banned from the site!