Next, locate the drain plug under the car; it should still be warm from the heated engine. Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine.
Table of Contents
What size is a BMW drain plug?
It’s a steel drain plug in the standard M12x1. 5x16mm size.
What size is the e90 oil drain plug?
3. Remove the oil drain plug and drain the oil. This will require a 17mm socket wrench and an oil catch can that can hold up to 6.5L of oil.
What size is the drain plug bolt?
Oil Drain Plug Standard M14-1.50, Head Size 17mm.
What size is a BMW oil filter wrench?
This 86.6mm 16 flute oil filter wrench is compatible with BMW and Volvo engines that have a smooth top oil filter cap.
What size is the oil filter socket on a BMW?
36mm Oil Filter Socket Fits BMW, Ford, Mercedes, Mini, VW, Audi, Volvo, Porsche Vehicles and All With 36mm Oil Filter Caps, Heavy Duty Oil Filter Wrench 3/8″ Drive 6-Point Oil Filter Removal Tool.
What size nut is on oil drain?
According to rockauto.com, your drain plug should be an M12x1. 75 with a 15mm head.
What size bolt is on the oil drain pan?
Engine Oil Pan Bolt | 45660 | Oil Pan Bolts, 5/16-18, Head Size 3/8 In.
What size socket fits an oil pressure switch?
The Lisle 13250 Oil Pressure Switch Socket fits 1-1/16″ switches up to 2-5/8″ long that are found on newer GM and Chrysler Vehicles. It will fit 1-1/16″ oil pressure sending units (gauge type), found on most all ’91 and newer GM vehicles.
How many quarts does a BMW 335i take?
Engine Oil Capacity: 6.9 quarts (with filter). After refill check oil level.
How do you remove the oil cap on a n54?
Do you need a special tool to change the oil on a BMW?
You need some tools before you start the oil change process. Make sure you have handy an oil pan, socket and socket wrenches, and a flat head screwdriver.
Are all oil drain bolts the same?
Let’s get one thing straight: oil drain plugs are not universal. Just because an oil drain plug has the thread pitch you need for a vehicle, that doesn’t mean it will work with the oil drain pan.
Are plug holes a standard size?
Standard bath plugs measure about 1-3/4 inch (44.5mm) diameter and suit the hole in a 1-1/2 inch BSP waste. If your original bath plug is a pop-up type, be careful with the replacement as pop-up plugs are often a non standard size.
What tool do I need to change oil?
In addition to oil, you’ll need an oil filter, an oil-filter removal wrench, a wrench to remove the drain plug, a funnel, a drain pan and some gloves. You may also need to raise the car to gain access, in which case you’ll need a floor jack and safety stands, or a pair of purpose-made steel ramps.
What size is a E90 oil filter wrench?
Oil filter wrench size? – BMW 3-Series (E90 E92) Forum. Oil filter wrench size? 86mm, 16 point.
Can you use oil extractor on BMW?
What size is oil filter nut?
Enter our friend, the oil filter socket. The socket typically has a regular 3/8-inch drive female coupling on top, then you simply insert your ratchet and get to work.
What socket does a BMW use?
3/8″ Drive External Torx Socket Set. BMW engines use the E-torx hardware throughout the engine, this is a must have for anyone doing engine work on their BMW.
Can I use any 5w30 oil in my BMW?
Oil for BMW’s must have an API rating of SM or higher; your recommended SAE grade* will vary based on climate. A few of the recommended oils for your 2007 BMW include Mobil 1 SAE 0W-40 and Valvoline SynPower SAE 5W-30. If you live in a cold weather climate, the use of the 0W-40 is best.
How do you remove a BMW oil filter?
What tool is used to drain oil plugs?
You’ll need a ratchet and socket set to remove the oil drain plug, an oil filter wrench (or maybe just a strong grip) to remove and install the filter, a drain pan to catch the spent oil, and a funnel to refill it.
Do you need to torque oil drain plug?
No it’s not a necessary tool for the drain plug. However you don’t want to over tighten the drain plug either. You also want to change the drain plug sealing washer when you change the oil. As the plug is designed to be used only one time.
How do I know what size nut I have?
The measurement of an inch nut or bolt will be listed as the thread size — a number between one and 12 or an inch increment followed by the threads per inch (TPI). If the diameter is less than 1/4 inch, the diameter will be listed as a number between zero and 12; the larger the number, the closer it is to 1/4 inch.
How do I know what size drain plug I have?
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.