3/8″ Drive External Torx Socket Set. BMW engines use the E-torx hardware throughout the engine, this is a must have for anyone doing engine work on their BMW.
Table of Contents
What size is socket for spark plug on BMW 328i?
BMW Spark Plug Socket Thin Wall (3/8″ Drive, 12 Points, 14mm)
What tools do I need to change the spark plugs in a BMW?
- Ratchet set.
- Torque wrench.
- Metric socket set.
- Hook pick set.
- Screwdriver Set.
- Spark Plug Socket.
- Socket Extensions.
Do you need a special socket for BMW spark plugs?
Everyone also knows turbo BMW / MINI engines require a special thin-walled socket to remove/reinstall the spark plugs.
What size tool do I need to remove spark plugs?
You’ll need just a few tools to change out the spark plugs on your car. The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place.
What size socket fits a BMW lug nut?
You need a metric (17mm) wrench/socket.
What size is a spark plug socket?
The most common spark plug socket sizes are the 5/8 inch and 13/16 inch sockets.
What can I use instead of a spark plug wrench?
- An adjustable wrench.
- A plier.
- Strong magnet.
- A suitable size nut wrench.
Can spark plugs be changed without tools?
You don’t. You need a sparkplug wrench. If the plug is loose enough to remove by hand then it will blow off in use. Most of the time sparkplugs are in deep holes so only a wrench can reach them.
Is a deep socket the same as a spark plug socket?
Spark plug sockets are usually pretty long and referred to as a deep socket in most cases but there are some sockets out there that are even longer than the standard deep socket. These are sometimes referred to as long or even extra long spark plug sockets.
Does BMW use NGK spark plugs?
Bosch and NGK are original suppliers to BMW for spark plugs and the ignition system is set up to use these plugs. To keep the engine running at its best, and get the most from your performance upgrades, we only recommend direct replacement spark plugs.
Is a spark plug socket different from a regular socket?
Spark plug sockets are longer than standard sockets, and frequently come with a rubber insert that prevents the spark plug from becoming damaged while the wrench is working. A socket bit is a hex socket with a bit inside.
What are the 3 sizes of spark plug sockets?
Most newer vehicles will have a 5/8-inch spark plug. Smaller engines, such as those in lawnmowers will also have a spark plug of this size.As such, the spark plug socket used is also a 5/8-inch one. 13/16-inch sockets are also common, most often found in engines for older vehicles.
What size socket do I need for NGK spark plugs?
Most spark plugs require a 5/8″ (16mm) size spark plug socket.
How do you remove a spark plug without a tool?
What size is a BMW wheel nut?
This is a super tough wheel stud nut in a standard 17mm size. The zinc finish is durable and bright so your eye catches it quick (important during fast pitstop tire changes). 17mm is the standard BMW bolt head size so you won’t have to buy extra sockets.
What size are the wheel nuts on a BMW 3 Series?
Thread Size: M12 x 1.5. Hex Size: 17mm.
Are BMW bolts metric or standard?
All bolts have torque values and some bolts are single use (torque + angle = stretched permanently). There is no such thing as good n’ tight : 1/4″, 3/8″, 1/2″ metric torque wrenches – Make sure it has a metric scale, BMW service documentation is always metric.
What tools do I need to work on a BMW?
- A Socket Set. Many BMWs come with a small toolkit that folds down from the top of the trunk.
- A Torque Wrench. The service manual says those head studs should be tightened down to 100 ft.
- An Air Compressor.
- A Multimeter.
- A Work Light.
- An Impact Gun.
What Torx does BMW use?
- BMW Genuine Torx Screw – M6X16.
- It is used in Air duct — – Intake muffler/Filter cartridge/HFM —
- Manufacturer Warranty: 24000 miles or 2 years.
- Please see Product Description below for vehicle compatibility.
Are BMW bolts metric or imperial?
All bolts have torque values and some bolts are single use (torque + angle = stretched permanently). There is no such thing as good n’ tight : 1/4″, 3/8″, 1/2″ metric torque wrenches – Make sure it has a metric scale, BMW service documentation is always metric.
What are the 2 common spark plug socket sizes?
When we say “spark plug size”, we usually mean the diameter of the threads of the spark plug. The two most common spark plug sizes in modern motorcycles and small cars are 14mm and 18mm. Some automobile manufacturers also use 16mm high-thread count spark plugs and 12mm long-reach spark plugs.
Can you put spark plugs in without a torque wrench?
Spark plugs should be torqued to manufacturers’ specifications. However, it is possible to tighten the plugs satisfactorily without a torque wrench.
Can you tighten spark plugs without a torque wrench?
It all comes down to weather or not you personally can accurately estimate the torque applied to the spark plugs. You shouldn’t, you won’t be able to properly tighten it without a torque wrench. You’ll either leave it too loose or overtighten it. Either could damage the cylinder head.
Can you mess up replacing spark plugs?
Incorrectly removing or installing spark plugs can cause damage to your engine. Also, care needs to be taken when removing spark plug wires, especially if you plan to reuse them. It’s possible to damage the threads inside the engine when installing the spark plug.