Pentosin – Pentofrost NF (G11) Silicate European Concentrate Antifreeze / Coolant – 1.5 Liters (Part No. 8114117)
Table of Contents
What kind of coolant does a BMW 5 series take?
BMW’s blue G11 coolant is designed to promote heat transfer and prevention of corrosion throughout your cooling system. Genuine BMW coolant is nitrate and phosphate free. Note that BMW coolant must be diluted with distilled water to a 50:50 mixture before adding to vehicle.
What kind of coolant does BMW require?
BMWs have specific coolant requirements (nitrite and phosphate free) to prevent build-up and corrosion of aluminum components, so not just any off-the-shelf antifreeze will do.
Is BMW coolant blue or green?
Green is backwards compatible with blue and can be used on cars before 2018. However, BMW does not advise using the older blue formula on cars made after January, 2018. The green coolant includes silicates, which add extra protection for cooling internals but the coolant must be replaced every two years.
Why does BMW use blue coolant?
We recommend using BMW’s “Blue” coolant in your car because it is silicate & phosphate free, and has a much longer lifespan inside of your car’s cooling system.
Does BMW take a certain coolant?
Your BMW, Porsche, Mercedes Benz, Audi or Volkswagen uses an HOAT coolant. HOAT coolants are derived from OAT coolants with the addition of silicate to protect aluminum surfaces.
Can you put water in BMW coolant?
While you can drive the car for a short time using water in place of the coolant, it won’t effectively protect your engine. This means its essential to get the problem that caused a low coolant level fixed as soon as possible, and the radiator filled with a 50/50 ratio of coolant to water.
Can I use red coolant in BMW?
no. BMW uses the blue coolant.
How do you top up the coolant on a BMW 5 Series?
What kind of coolant does a 2008 BMW 535i take?
Peak – 50/50 Antifreeze / Coolant, Gallon (Part No. PKPB53)
Can I mix green and blue coolant BMW?
Looks like they’re compatible and green can be mixed in with cars filled with blue but not the other way around. Pasted from getbmwparts: BMW HT-12 can be used in any vehicle that currently contains G48 coolant (blue), but G48 should not continue to be used in vehicles that were originally filled with HT-12.
What Colour is BMW coolant?
The proper BMW coolant is dark blue/green in color. I recently added some coolant to my expansion tank bc it was getting low.
Is it OK to mix green and blue coolant?
The answer to that is Yes. You can mix Peak with Zerek or Prestone – but only as long as the coolant is the same chemical type. The ratio doesn’t matter as much, but the type & application should match. The easiest way to remember is that you should try and match type – IAG with IAG, OAG with OAG and HOAT with HOAT.
How long does BMW coolant last?
How often should you change coolant in a BMW? Typically, you should have your BMW coolant flush completed every 30,000 miles or every two years. There are some instances where your vehicle can go without a flush for a longer period of time.
Why is my BMW coolant low?
Reasons Why Your Coolant Might Be Low leak in radiator. leak in radiator hoses. leak in water pump. damaged or broken radiator seal.
Does BMW coolant expire?
A sealed bottle of antifreeze has an indefinite shelf life. Once opened, it will keep for years if stored in the original container. Antifreeze – coolant that has not been mixed with water – tends to last even longer than pre-mixed engine coolant, though both last for years.
What happens if you put the wrong antifreeze in a BMW?
Using the wrong engine coolant can gradually lead to corrosion and damage to the water pump, radiator, radiator hoses and cylinder gasket. This can lead to damage to the engine in the worst case.
Can I mix orange and blue coolant?
It’s never a good idea to mix two different colors or types of antifreeze. Mixing two formulas won’t cause any dangerous reactions or explosions, but it could turn your coolant into a sludgy chemical mixture that won’t be able to flow properly through your cooling system.
How do you mix BMW coolant?
Coolant is mixed with distilled water for the best protection against boiling, freezing, corrosion, and lubrication. A 1:1 mix of antifreeze and distilled water will give the best protection in street cars.
Can I use water instead of coolant?
Technically speaking yes you can use plain water in your cooling system but it isn’t recommended as a long term solution and certainly not in extreme weather conditions. The problem with using water in your cooling system is that water freezes at 0°C.
How much does BMW coolant cost?
The average cost for a BMW 328i coolant change is between $276 and $315. Labor costs are estimated between $151 and $191 while parts are priced at $124.
Can I put water in my coolant?
Can you top your coolant up with water? Coolant should only be topped up with water in case of an emergency when the coolant liquid level is lower than it should be. While topping up with water will help you get safely to the nearest garage and identify any issues, it shouldn’t be relied upon.
What happens if I dont add water to my coolant?
3 is that water must be mixed with the antifreeze-coolant in order to keep the performance additives (silicates, phosphates and nitrates) suspended. Without water, these important additives tend to settle. If they do that, you lose anti-corrosion and other additive protection.
Can you drive a car with low coolant?
If your car has a low coolant you can drive for some time. It really relies on the level of coolant. If it is low but it is above the minimum, you can drive your car for a few days. But if it is below the minimum, please do not even try to run your engine.
How much BMW coolant do I need?
1 gal BMW coolant +1 gal distilled water. The DIY covers it. 2 gallons total.