This is an OEM N55 valve cover gasket set manufactured by Elring – one of the original suppliers to BMW for this part, as well as many other gaskets and seals. As the OEM it meets all of BMW’s original design, fitment, and performance requirements and is TUV approved.
Table of Contents
How much does it cost to replace valve cover gasket on BMW 328i?
BMW 328i Valve Cover Gasket Replacement Cost Estimate. The average cost for a BMW 328i valve cover gasket replacement is between $581 and $713. Labor costs are estimated between $501 and $632 while parts are priced between $80 and $82.
Why does BMW use plastic valve covers?
Most BMW valve covers and intake manifolds are made of plastic to reduce weight and production costs, but as with most things that age, these components are susceptible to warpage and gasket failure due to the constant heating and cooling they experience.
Why do BMW valve cover gaskets fail?
BMW valve cover gasket Because the gasket is delicate and prone to damage, continuous exposure to dirt, debris, and heat over time will cause it to become brittle and crack, losing its ability to prevent leaks.
How long does it take to replace a valve cover gasket on a BMW?
Depending on your model, it takes 2 to 8 hours to replace BMW Valve Cover Gaskets. The cost to change the gaskets vary from BMW engine and model so it always best to have German Car Depot inspect before quoting a price.
How long does it take to replace a valve cover gasket?
In many cases, valve cover gasket replacement can be completed in 1-2 hours, leading to only modest labor charges. However, it can take as long as 4-5 hours to complete the same job on other more complex engines. This, of course, will command a much higher labor cost.
How much does a BMW gasket cost?
The average cost for a BMW 325i head gasket replacement is between $3,235 and $3,877. Labor costs are estimated between $2,033 and $2,565 while parts are priced between $1,202 and $1,313. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
Why do BMW engines have so much plastic?
Plastic parts are cheaper to manufacture. And those savings add up over all the cars, and all the replacement parts. Note though that the savings are not only for BMW, but also the OEMs that manufacture the parts for them. Plastic is significantly lighter than metal.
Why do German cars use so much plastic?
To keep the car weight lighter and to keep the cost of cars lower as plastic parts cost far less to manufacture as compared to metal parts. This has resulted in increased fuel efficiency.
What makes a valve cover crack?
Although the valve cover gasket is shielded from both up and downsides, it is very delicate and prone to damage from the sides since it is manufactured with plastic and rubber. Over time, the gasket becomes brittle and dries up or crack due to exposure to heat.
Is it OK to drive with leaking valve cover gasket?
Is it safe to drive with a valve cover gasket problem? Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.
When replacing valve cover gasket What else should I replace?
If you were recommended a valve cover gasket because it was leaking, just make sure that the fastener seals are also replaced. If not, they are guaranteed to go next. As far as any other components go, if they are attached to the valve cover in any way, you should likely consider replacing those seals as well.
How long does a valve cover last?
Recommended Services. The engine valve cover gasket should last for about 8 to 12 years. If the gasket is leaking, then the PCV (Positive Crankcase Ventilation) valve is plugged up causing the engine to build up too much crankcase pressure blowing out the gasket.
How much does it cost to fix a BMW oil leak?
On average, the cost of a BMW engine leak inspection is about $201. The average cost of engine oil leak repairs can be broken down into the cost of valve cover gasket replacement ($1524), engine oil pan replacement ($2180), engine oil pan gasket replacement ($1476), and engine oil filter replacement ($20).
What is valve cover gasket in BMW?
You may have a leaking valve cover gasket. The valve cover is a part that goes over the top of the cylinder head, keeping oil in and dirt out. In some engines it covers the timing chain too. Between the cover and the cylinder head there’s a gasket that seals the joint.
Can I replace valve cover gasket myself?
Replacing a valve cover gasket is fairly basic but the procedure varies by engine. The toughest part is usually getting to the valve cover itself. Step 1: The first step may be the last step. Before tearing everything apart, first try gently cinching down the valve cover bolts or use a torque wrench.
Is it worth it to replace a valve cover gasket?
The short answer is, yes. If your engine is losing oil, running the car for too long without an inspection and repair can cause permanent damage. If the gasket is worn out, it will leak engine oil and the top of the engine will be likely be covered in oil.
How much does a valve cover gasket job cost?
What is the typical valve cover gasket replacement cost? The typical total cost of a valve gasket replacement is around $110 – $340 depending on the make and model of the vehicle. The parts cost very little – perhaps $10 to $40. The labour makes up the bulk of the cost: from $100 to $300.
How many gaskets does a BMW have?
BMW Head Gasket Parts Most modern engines have at least 2 head gaskets but some may have a gasket for each cylinder.
How much is it to fix an oil leak on a BMW 328i?
The average cost for a BMW 328i oil pan gasket replacement is between $799 and $966. Labor costs are estimated between $639 and $806 while parts are priced at $160. This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed.
How long does it take to change a head gasket on a BMW?
Replacing the gasket can take anything from six hours to a few days, depending on the severity of the failure. A blown head gasket is one of the biggest failures your car can suffer, and to fix it properly takes time.
Why do BMW’s drive so well?
The reason a BMW feels like a BMW is IMO due to chassis dynamics. BMW better understands the interplay between weight balance, strength of materials, and the interplay between the unibody, the suspension system, and the wheel and tire package.
Which BMW engines are reliable?
- BMW B58 Engine.
- BMW M20 Engine.
- BMW M50 Engine.
- BMW S62 Engine.
- BMW N52 Engine.
- BMW M54 Engine.
What year did BMW start using plastic?
However, as of about 1991, BMW entered the new age of the latest technology in plastic injection molds. Plastic is a wonderful innovation; it has improved everyone’s life in someway.
Why do German cars drive better?
German cars are also designed with European roads in mind, whereas American roads are very straight and wide (hence the popularity of muscle cars in America) a car in Europe must be able to handle the often narrow, winding roads which is why they’re praised for their good handling capability.