Blown Fuse or Stuck Bulb Sometimes a blown fuse to the ABS can cause the light to come on and stay on. Fuses are easy to blow, so sometimes it’s an easy fix to check.
Table of Contents
What does it mean if your ABS light wont shut off?
The four common reasons that typically cause this light to turn on include a malfunctioning ABS module, low levels in the fluid reservoir, broken wheel speed sensors, or the system is turned off. Your ABS actually shares some important components with another system in your vehicle: your traction control system.
How do I reset my BMW ABS?

How do I reset my ABS light after repair?
Step One: Disconnect the positive cable from your car battery. Then, hold down the brake pedal to drain the vehicle’s electrical system. This will result in a reset of the car’s central computer. Plug the cable back in to restore power.
What should you do if your ABS light stays on?
And the answer is simple: if your ABS warning light stays on, then you should get your brakes checked immediately. However, this does not mean you should drive to a garage! If there’s a problem with your brakes, your car might not be safe to drive. Instead, you should call your garage.
Will disconnecting battery reset ABS light?
Will Disconnecting The Battery Reset The ABS Light? Yes, if the car battery is disconnected long enough it will reset the ABS light.
Why is my ABS brake light and traction control light on BMW?
Because the ABS and traction control often share the same module, a problem with one mechanism might be indicated by a light for both. If the brake system is malfunctioning, the traction control light might come on as a result. The light for your ABS might also come on if the brake fluid is low.
What does it mean when ABS light comes on on BMW 328i?
Common reasons for this to happen: If the wheel speed sensor is defective, or if the wiring from the sensor to the ABS is damaged, then the ABS will not get the wheel speed information that it requires.
What happens if you remove the ABS fuse?
The anti-lock function will stop working properly, which may increase the distance it takes to safely stop your vehicle. The rear tires will lock, which will increase vehicle swing on turns and may make your vehicle more difficult to control.
How do you tell if ABS fuse is blown?
- ABS Warning Light. It is a tell-a-tale sign of an anti-lock blown fuse.
- Tyre Locking. When the fuse is blown it fails to supply proper electricity to the system.
- No Braking. If the fuse is completely blown out it shuts off the anti-lock system completely.
- Longer Braking Distance.
What does a blown ABS fuse look like?
Close inspection of a blown fuse should reveal a dark and perhaps cloudy appearance on the inside of the fuse. The wire inside of the fuse should also be visibly split when the fuse is blown. A blown fuse will usually deactivate the entire system, or at the very least the circuit that it was responsible for powering.
Which fuse is the ABS fuse?
The fuse box for the ABS is located in the engine compartment on the passenger’s side. To open it, push the tab as shown. 253 to 256, or the diagram on the fuse box lid, which fuse or fuses control that component. Check those fuses first, but check all the fuses before deciding that a blown fuse is not the cause.
How long does it take for ABS light to go away?
This is normal, and shows that the ABS system is checking itself as it’s supposed to. Again, it’s completely normal for the ABS Warning Light to come on and off in this way, and it usually lasts for about 2-4 seconds, depending on your vehicle. It’s when the ABS light stays on longer than this that we have a problem.
How much does it cost to get ABS light off?
What is the cost to resolve an illuminated ABS light? A good mechanic will charge about $100 for the initial diagnosis. Many ABS components are very accessible, so labor for most repairs will not run high typically in the $100 to $150 range.
What would cause the ABS and brake light to stay on?
Most commonly, this light is triggered by low brake fluid or an engaged parking brake. However, on some vehicles, it can simply indicate a problem elsewhere in the system and can be illuminated immediately if there is an ABS fault.
Can Low brake fluid cause ABS light to come on?
One reason your vehicle’s ABS light is on is because it may be sensing abnormally low levels of brake fluid. You’ll be able to notice if your brake fluid is low by the way your car brakes.
How much does it cost to replace ABS module?
An ABS control module replacement can range from $320 to over $1,000. The wide price range isn’t really driven by labor cost, which will typically be around $80-$120. It depends on how much the control module costs and how difficult it is to source.
Is it safe to drive with ABS and traction light on?
You should never disregard the warning if one or both the ABS and TCS lights come on. It is especially unsafe to drive if both indicators are lit, along with the red brake warning light, as this signifies a serious problem with your braking system.
Can Autozone reset ABS?
Probably not. General purpose OBD II scanners such as Autozone might have cannot read ABS system issuesโฆ there is a separate processor for that (and that’s why it has a separate light from the CEL or MIL check engine light. So it cannot read and cannot reset ABS (or SRS either) codes and lights.
Do you have to reset ABS light after changing sensor?
The light should reset itself, but, as was mentioned, it may take a few key on/key off cycles for this to happen. The light should reset itself, but, as was mentioned, it may take a few key on/key off cycles for this to happen.
Does traction control have a fuse?
On these cars, the dash “TCS” light will come on when you turn the system off. Otherwise, your traction control system might have a separate fuse in the box, which you could pull to disable it. Beware, though — TC systems tend to be integrated with others, like the stability control and anti-lock brakes.
How much does it cost to fix ABS and traction control?
The total cost of parts and labor to replace an ABS control module can be anywhere between $320 and $1,000 depending on the cost of the control module itself and how difficult it is to find. Despite the cost, you should replace your cars ABS control module if: The brakes lock up even when you are driving normally.
Can low tire pressure cause ABS light to come on?
The short answer is yes, low tire pressure can cause your ABS light to come on. The ABS (anti-lock-braking) system is responsible for maintaining contact with the road when braking. This suggests that you may have low tire pressure in one of your tires.
How much does it cost to replace wheel sensor?
The average cost for wheel speed sensor replacement is between $205 and $250. Labor costs are estimated between $62 and $78 while parts are priced between $143 and $172. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
How much does it cost to fix BMW ABS?
The Best in Auto Repair The average cost for a BMW 328i ABS control module replacement is between $1,638 and $1,710. Labor costs are estimated between $279 and $352 while parts are priced at $1,359. This range does not include taxes and fees, and does not factor in your specific model year or unique location.